حول GUANGDONG BAOSHAN TRADING CO.,LTD
منتجاتنا
عرض جميع المنتجات ← →
PVC Phenol-free Ca/Zn stabilizer
الموديل: SC-135
المعلمات: PRODUCT IDENTIFIER : ADK STAB SC-135
GENERAL USE : Stabilizer
FORMULA : Mixture
Film-forming agent TXIB
الموديل: Eastman TXIB(TM)
المعلمات: CAS: 6846-50-0
Molecular Weight ： 286.4
Empirical Formula ：C16H30O4
Appearance ： Free from insoluble matter and haze
Acidity as Isobutyric Acid： 0.05 wt % max.
Specific Gravity @ 20°C/20°C： 0.942-0.948
Surface Tension @ 25°C ： 27.56 dynes/cm
Saponification Equivalent ：144.8
Refractive Index ：1.43 n(25°C/D)
Boiling Point @ 760 mm Hg: 281°C (537.8°F)
Freezing Point ：-70°C (-94°F)
Flash Point Cleveland Open Cup ： 143°C (290°F)
Fire Point Cleveland Open Cup ：152°C (305°F)
Autoignition Temperature ： 424°C (795°F)
Solubility in Water, @ 20°C ： 0.42 g/L
Evaporation Rate @ 100°C: 0.674 (g/1000 cm2)/h
Hydrolysis after 96 hr @ 98-99°C ： 0.003%
Viscosity, Brookfield a @ 25°C ：9 cP
Wt/Vol @ 20°C ： 7.86 lb/gal
Assay ： 98.6 wt % min.
Color Pt-Co: 10 max.
PVC Phenol-free Ca/Zn stabilizer
الموديل: CZ-190
المعلمات: Yellowish, transparent liquid with characteristic odor.
Specific gravity: 0.950–1.050 at 25°C.
Flash point:>250°C.
Specific gravity: 0.950–1.050 at 25°C.
Flash point:>250°C.
PVC Phenol-free Ca/Zn stabilizer
الموديل: CT303TX（BAEROSTAB CT 303 TX）
المعلمات: Appearance: Clear liquid -
Density (20℃): Approximately 1.05 g/cm³
Viscosity (25℃): Approximately 1000-3000 mPa·s
Calcium content: Approximately 1.5-2.0%
Zinc content: Approximately 0.5-1.0%
Thermal stability: Excellent
Odor: Slight characteristic odor
Applicable temperature: 160-200℃
Eastman TXIB viscosity reduce
الموديل: Eastman TXIB(TM)
المعلمات: Molecular Weight ： 286.4
Empirical Formula ：C16H30O4
Appearance ： Free from insoluble matter and haze
Acidity as Isobutyric Acid： 0.05 wt % max.
Specific Gravity @ 20°C/20°C： 0.942-0.948
Surface Tension @ 25°C ： 27.56 dynes/cm
Saponification Equivalent ：144.8
Refractive Index ：1.43 n(25°C/D)
Boiling Point @ 760 mm Hg 281°C (537.8°F)
Freezing Point ：-70°C (-94°F)
Flash Point Cleveland Open Cup ： 143°C (290°F)
Fire Point Cleveland Open Cup ：152°C (305°F)
Autoignition Temperature ： 424°C (795°F)
Solubility in Water, @ 20°C ： 0.42 g/L
Evaporation Rate @ 100°C 0.674 (g/1000 cm2)/h
Hydrolysis after 96 hr @ 98-99°C ： 0.003%
Viscosity, Brookfield a @ 25°C ：9 cP
Wt/Vol @ 20°C ： 7.86 lb/gal
Assay ： 98.6 wt % min.
Color Pt-Co 10 max.
Hexadecyl Ester 16
الموديل: Eastman TXIB(TM)，RTC-16
المعلمات: 2,2,4-trimethyl-1,3-pentanediol diisobutyrate
CAS: 6846-50-0
Molecular Weight ： 286.4
Empirical Formula ：C16H30O4
Appearance ： Free from insoluble matter and haze
Acidity as Isobutyric Acid： 0.05 wt % max.
Specific Gravity @ 20°C/20°C： 0.942-0.948
Surface Tension @ 25°C ： 27.56 dynes/cm
Saponification Equivalent ：144.8
Refractive Index ：1.43 n(25°C/D)
Boiling Point @ 760 mm Hg 281°C (537.8°F)
Freezing Point ：-70°C (-94°F)
Flash Point Cleveland Open Cup ： 143°C (290°F)
Fire Point Cleveland Open Cup ：152°C (305°F)
Autoignition Temperature ： 424°C (795°F)
Solubility in Water, @ 20°C ： 0.42 g/L
Evaporation Rate @ 100°C 0.674 (g/1000 cm2)/h
Hydrolysis after 96 hr @ 98-99°C ： 0.003%
Viscosity, Brookfield a @ 25°C ：9 cP
Wt/Vol @ 20°C ： 7.86 lb/gal
Assay ： 98.6 wt % min.
Color Pt-Co 10 max.
PVC Phenol-free Ca/Zn stabilizer
الموديل: SC-1600C
المعلمات: Appearance: Clear liquid -
Density (20℃): Approximately 1.05 g/cm³
Viscosity (25℃): Approximately 1000-3000 mPa·s
Thermal stability: Excellent
Odor: Slight characteristic odor
Applicable temperature: 160-200℃
Environmentally Friendly Plasticizer
الموديل: DOTP
المعلمات: Dioctyl terephthalate
CAS: 6422-86-2
Concentration/Concentration range: 100%
Appearance: Transparent oily liquid without visible impurities.
Color (Pt-Co): ≤30.
Purity: ≥99.5%.
Density (20°C): 0.981-0.985 g/cm².
Acid value: ≤0.02 mg KOH/g.
Flash point: ≥210°C.
Moisture: ≤0.03%.
Volume resistivity: ≥2×10⁹ Ω·m.
Freezing point: -48°C (typical value).
Boiling point: 383°C (0.1 MPa) (typical value).
Ignition point: 399°C (typical value).
BASF HEXAMOLL® DINCH
الموديل: BASF HEXAMOLL® DINCH
المعلمات: CAS Number: 474919-59-0 (USA), 166412-78-8 (regions outside the USA)
Dynamic viscosity*at 20C : 44-60mPa.s ASTM D 7042
Density* at 20C: 0.944-0.954g/cm DIN 51757/D 4052
Platinum-cobalt color :40max. DIN EN ISO 6271-2/D 5386
Refractive index* no20:1.460-1.466 DIN 51423/<D 1045
Acid value: 0.07 max.mg KOH/g DIN EN ISO 2114/D 1045
Ester content: 99.5 %min. by area GC-method BASF
Water content: 0.1%max. by weight DIN 51777,Part 1/E 203
Phthalate content: 0.01% max. UV-BASF
Molar mass :424.7 g/mol
Pour point (DIN ISO 3016) :-54 °C
Surface tension at 20 °C ：30.7 mN/m (DIN EN 14370)
Saponification value ：264 mgKOH/g (DIN EN ISO 3681)
Acetyl Tributyl Citrate ATBC
الموديل: ATBC
المعلمات: CAS NO.：77-90-7
Molecular Formula：C20H34O8
Molecular Weight：402.43
Appearance：Colorless transparent oily liquid, odorless
Color (Pt-Co)：≤30#
Purity (Ester Content)：≥99.0%
Relative Density(25/25C)：1.045-1.055 g/cm3
Acid Value：≤0.2 mgKOH/g
Moisture Content：≤0.15%
Refractive Index (25°C/D)：1.4410-1.4425
Flash Point(COC)：≥204℃
Freezing Point：≤-80℃
Heavy Metal (as Pb)：≤10 mg/kg
Environmental：Compliant with REACH,
Certification：RoHS, FDA,GB 4806
Polyvinyl chloride paste resin
الموديل: TPM-31
المعلمات: CAS No.： 9002-86-2
PVC paste resin,PVC Foam Paste Resin SY‑Z140
الموديل: SY-Z140
المعلمات: Substances
.CAS No. Description 9002-86-2 Polyvinyl chloride
. Remark: This product contains substance Polyvinyl chloride (CAS No.9002-86-2) 100% by weight.
PVC Paste Resin PSM-31
الموديل: Kaneka PSM-31
المعلمات: Polyvinyl chloride paste resin
CAS: 9002-86-2
Item & Details
Brand: Kaneka (Japan)
Type: Microsuspension PVC homopolymer paste resin
K-value: 72
Paste viscosity: approx. 3,500 mPa·s (medium viscosity)
Volatile matter: ≤0.8%
Apparent density: approx. 0.30 g/cm³
PVC Paste Resin PSH-10S
الموديل: Kaneka PSH-10S
المعلمات: Polyvinyl chloride
CAS: 9002-86-2
Item Details
Brand: Kaneka (Japan)
Type: Microsuspension PVC homopolymer paste resin
K-value: 70
Paste viscosity: approx. 2,000 mPa・s (25℃, low viscosity) 约 2000 mPa・s
Volatile matter: ≤0.8%
Apparent density: approx. 0.30 g/cm³
PVC Paste Resin PR-G
الموديل: Formosa Plastics PR-G
المعلمات: Brand: Formosa Plastics (Taiwan)
Type: Microsuspension PVC homopolymer paste resin
K-value :77.5-81.0
Polymerization degree: 1700±100
Paste viscosity: Low viscosity（2,000-3,000 mPa・s）
Volatile matter: ≤0.5%
Apparent density: 0.30±0.05 g/cm³
Residual VCM ≤5 ppm
PVC paste resin
الموديل: LF-71G
المعلمات: CAS: 9002-86-2
Polymerization Method: Microsuspension polymerization
K-value:Approx. 71,
Viscosity Number: 115–125 mL/g
Volatile Matter: ≤ 0.5%
Apparent Density:0.30–0.33 g/cm³
Paste Viscosity: Medium
Plasticizer Absorption: Moderate
PVC paste resin
الموديل: LF-51
المعلمات: CAS: 9002-86-2
Polymerization Method: Microsuspension polymerization
Average Degree of Polymerization 1300±100
Viscosity Number: 115–125 mL/g
Volatile Matter: ≤ 0.5%
Apparent Density:0.30–0.33 g/cm³
Paste Viscosity: Medium
Plasticizer Absorption: Moderate
PVC paste resin
الموديل: Shenyang PVC Paste Resin Powder PSM-31
المعلمات: Production process: Micro-suspension Polymerization
Chemical type: Polyvinyl Chloride Homopolymer
Appearance: White ultrafine powder
Degree of Polymerization):1200-1400 -
Volatile Component: ≤0.50 %
Residual VCM : ≤5.0 mg/kg
Sieve Residue: ≤10.0mg/kg
Bulk Density: 0.2-0.45 g/cm³
BType B Viscosity, 30℃: 1500-6500 mPa·s
PVC Paste Resin Powder
الموديل: Shenyang PVC Paste Resin Powde PSH-10
المعلمات: Production Process Micro-suspension Polymerization
Chemical Type Polyvinyl Chloride Homopolymer
Appearance White ultrafine powder, average particle size 1-2μm
Degree of Polymerization (Degree of Polymerization): 1580-1780 (typical value 1680) - National standard test method
Volatile Component (Volatile Component): ≤0.50% 105℃, 2 hours
Residual Vinyl Chloride Monomer (Residual VCM): ≤5.0 mg/kg Gas chromatography, in line with environmental protection and safety standards
Sieve Residue (Sieve Residue): ≤10.0mg/kg 0.15mm standard sieve
Bulk Density (Bulk Density): 0.20-0.40 g/cm³ Loose bulk density test
Type B Viscosity (Type B Viscosity): 1000-2500mPa·s 30℃, resin: plasticizer (DOP) = 100:65 ratio
K Value 72-75: - Calculated according to the degree of polymerization
Viscosity Number: 145-160 ml/g Dichloroethane solution test
Glass Transition Temperature (Tg) Approximately: 82℃ ℃ DSC test
Moisture Content: ≤0.30% Karl Fischer method
High thixotropic PVC paste resin powder
الموديل: KANEVINYL PASTE EH-251
المعلمات: Production Process Emulsion Polymerization
Chemical Type Polyvinyl Chloride Homopolymer
Appearance White fine powder, with an average particle size of approximately 0.2-0.5μm
K Value: 76 (typical value) - Test for soluble polymers in cyclohexanone
Degree of Polymerization: Approximately 1550-1650 - Calculated based on K value
Paste Viscosity (V20): 5,500 (typical value) mPa·s 30℃, resin: plasticizer (DOTP) = 100:80 ratio
Viscosity Number: Approximately 150-158 ml/g Test in dichloroethane solution
Volatile Component :≤0.50% 105℃, 2 hours
Residual Vinyl Chloride Monomer (Residual VCM):≤5.0mg/kg Gas chromatography, in line with international environmental protection standards
Sieve Residue:≤10.0mg/kg 0.15mm standard sieve
Bulk Density: 0.30-0.50 g/cm³ Loose bulk density test
Glass Transition Temperature (Tg) Approximately: 81℃ ℃ DSC test
Moisture Content: ≤0.30% Karl Fischer method
Rheological Properties Thixotropic Rheology - High viscosity at low shear, good fluidity at high shear
PVC resin powder
الموديل: TG-1000S
المعلمات: K‑Value: 65.3–68.1
Degree of Polymerization: 960–1100
Bulk Density: 0.51–0.61 g/cc
42‑Mesh Pass: ≥99.5%
Volatile Matter: ≤0.50%
Appearance: White Powde
Kaneka Blending Resin B5F
الموديل: PBM-B5F
المعلمات: Polyvinyl chloride
CAS: 9002-86-2
Item Details
Brand: Kaneka (Japan)
Type: PVC blending resin / PVC modifier
Form: White fine powder
K-value: 65-68
Volatile matter: ≤0.5%
Apparent density: 0.32-0.35 g/cm³
Compatibility: Excellent compatibility with PVC homopolymer
PVC resin powder HG-1000F
الموديل: Hanwha Ningbo HG - 1000F PVC Resin Powder
المعلمات: CAS NO.:9002-86-2
Average Degree of Polymerization (DP): 1000±50
K Value: 66 – 68
Apparent Density: 0.56±0.04 g/cm³
Volatile Matter: ≤ 0.30 %
Fish Eyes: ≤5 pcs/400cm²
Residual Vinyl Chloride Monomer (VCM): ≤1.0 ppm
Whiteness (after 160℃, 10min): ≥86.8 %
Plasticizer Absorption: approx. 26.5 g/100g resin
Residue on Sieve (+42 mesh): 0 %
Blend resin powder
الموديل: 266EF（BIOVYN™ 266EF）
المعلمات: CAS: 9002-86-2
K value: 66
Type: Extender Homopolymer
Low haze property: Yes
Particle size: medium μm
Apparent density: approximately 0.55-0.60g/cm³
Volatile content: ≤0.30%
Residual vinyl chloride monomer: ≤1.0ppm
PVC resin powder
الموديل: DG-1000S
المعلمات: Average degree of polymerization: 950-1050
K value: 65-68
Apparent density: 0.51-0.57g/mL
Volatile content: ≤0.40%
Residual vinyl chloride monomer: ≤5μg/g
"Fish eye" count: ≤20 per 400cm²
Screen residue (250μm): ≤1.6%
Whiteness (reflectance): ≥85%
Thermal stability (160℃): ≥20min
Blend resin powder
الموديل: BJ-65
المعلمات: Chemical characteristics: Polyvinyl chloride
CAS Number: 9002-86-2
Chemical formula: (C2HsCI)n
Component part: 100%
Polymerization degree: ~1000
K value: 65 (grade)
Average particle diameter: 20-40μm (medium powder)
Apparent density: 0.45-0.52 g/cm³
Volatile matter: ≤0.4%
Residual vinyl chloride monomer: ≤5 ppm
High purity, impurity-free
SILICONE FLUID
الموديل: L-45
المعلمات: CAS-No. 63148-62-9 Polydimethylsiloxane Content:100%
Viscosity, dynamic：1000 mPa.s at 25C (77°F)
Viscosity,kinematic：1000 mm/s at 25℃ (77 °F
Blend resin powder
الموديل: Zhongtai PB-1000
المعلمات: Item Details
Brand Zhongtai Chemical (Xinjiang, China)
Type PVC blending resin /viscosity reducing resin
Form White fine powder
K-value 65
Volatile matter ≤0.5%
Apparent density 0.32-0.35 g/cm³
Particle size Small particle size with narrow distribution
Plasticizer absorption Low at room temperature
Compatibility Excellent compatibility with PVC homopolymer and paste resin
PVC Blend resin powder
الموديل: SB-100C
المعلمات: Polymerization degree : 850-1100
K value:62-67
Average particle diameter: 20μm
Apparent density:0.50-0.55 g/cm³
Volatile matter:≤0.4%
Residual vinyl chloride monomer:≤5 ppm
KANEVINYL PASTE SH-14
الموديل: SH-14
المعلمات: K-value：77
Degree of Polymerization：1700
Polymeric polyester plasticizer
الموديل: GLOBINEX W-2050
المعلمات: Viscosity (mPa·s, 25℃): 2300–3500
Color (APHA): 60
Acid Value (mg KOH/g): 0.5
Volume Resistivity (30℃, Ω·cm): min. 1×10¹¹
Specific Gravity (25/25℃): 1.05
PVC Phenol-free Ca/Zn stabilizer
الموديل: CZ-2756
المعلمات: Density (25℃): 1.02-1.08g/cm³
Viscosity (30℃): 200-250mPa·s
Acid value: ≤0.5mgKOH/g
Moisture: ≤0.1%
Flash point (COC): ≥180℃
Thermal stability (180℃, Congo red): ≥30min
Volatile organic compounds (VOC): ≤0.5%
Phenolic substances: Not detected
معرض الشركة
الشهادات والجوائز
قصص النجاح
PVC vinyl toy manufacturer
Close cooperation and stable production
Stable molding for consistent toy quality、High efficiency for mass toy production
مقاطع فيديو الشركة والمنتجات
مقدمة عن الشركة وجولة في المصنع
⏱ Duration: 3:45 | 👁 Views: 15,230
عرض المنتج - Kestrel K-1
⏱ Duration: 5:12 | 👁 Views: 28,450
عرض الابتكار التقني
⏱ Duration: 4:30 | 👁 Views: 12,890
شهادات العملاء وقصص النجاح
⏱ Duration: 6:20 | 👁 Views: 9,650
هل أنت مستعد لتغيير حياتك؟
اتصل بنا الآن لتعرف كيف تلبي منتجاتنا احتياجاتك.