حول Jiangsu Listrong Mechanical & Electrical Co., Ltd.
We believe that perfect high-quality products only come from zero defective production process. LISTRONG has adopted advanced production equipment and technology, scientific & standardized management systems and strict testing standards to ensure an internationally advanced level of quality , structure, performance and appearance. A post-sales service team with versatility and high efficiency is standing by to provide a full range of services and ensure that the products of your choice are in good working condition all the time. Our products, well-trusted and supported, have been sold throughout China and Southeast Asia, the Middle East, South Africa and other regions. LISTRONG persisted in the principle of “ quality wins the market, integrity makes for the brand”.We make each component with all our mind and energy and to meet multiple requirements all from clients’ interests. We hope to create maximal value for the community as well as for clients.
Industry professional leader.
1000+ successfully executed projects.
Excellent product quality and thoughtful customer service.
منتجاتنا
عرض جميع المنتجات ← →
Wire Drawing Machine
الموديل: 13DST
المعلمات: 1． Usage: Bare copper wire drawing
2. Inlet diameter: Ф3.5
3. Outlet diameter: Ф2.8mm-Ф0.8mm
4. Maximum mechanical speed: 1200M/MIN
5. Drawing speed: Only for reference
Outlet diameter(mm) speed
0.80-1.2㎜ 900-1200m/min
1.2-2.0㎜ 400-900 m/min
2.0-2.80㎜ 250-400 m/min
6. Elongation: 26～34%
Tolerance of elongation: ±2
7.Steam generator: 9KW, 12㎏/h
8.Compressed air:
working pressure 0.6～0.7 Mpa
Fluctuating value +0.02 Mpa
Leaking point -25 ℃
flow rate
200 L/min
9. Requirement for water：
Working pressure 0.2-0.4 Mpa
temperature ≤25 ℃
Hard value of the water max 5 dH
Hard value of the coolant max 12 dH
PH value 7～8
Flowing volume 420 L/min
10. Power: only for reference, it is according to customer’s requirment
3 phase voltage ～AC 3×380/415 (±10%)
Single phase voltage ～AC 220 (±10%)
Frequency of the current 50 Hz (±2%)
Wire Drawing Machine
الموديل: 26DW
المعلمات: 1.Application: Bare copper wire drawing
2.Inlet diameter: Ф0.8mm-Ф1.6mm
3.Outlet diameter: Ф0.1mm-Ф0.6mm
4.Maximum drawing speed: 2000MPM/MAX
5.Dies: 26 dies (provide by customer self ) Ф25mm*8
6.Ratio of M/C: Dies No. 1 to No.25 13%
Die No.26 8%
7.Drawing method: 4 shafts horizontally arrangement; sliding continuous drawing
8.Power: Main motor: 25HP（18.5KW）AC motor + frequency converter
Take-up motor: 5.5HP (4KW) AC motor + frequency converter
9.Frame: Cast
10.Transmission: Transmit by timing belts
11.Capstan: Coating by ceramic, horizontally arrangement
12.Lubricant system: Lubricant demand: 40L/MIN (without pump water and tank)
Spray lubricant above dies and capstans
13.Spool dimension: φ300mm( made according to customer)
Take-up capacity: 40-60KG
14.Bobbin loading & unloading； Screw pressing type, with cart
15.Traversing : 110W synchronizing motor traversing; 270mm/Max width
16.Spooling control method: Weight balance by swing arm; automatically revise spooling tension
17.Protection cover: Grille for transmission area;
Stainless steel plate for drawing area;
Sealed cover with 3 inspection windows for spooling area.
18.Brake: 20KG electromagnetic brake
19.Inbuilt UPS power back up system for brakes in case of electricity failure.
20.Weight: 2000Kg
21.Dimension: 2300L*1300W*1700H (mm)
Wire Drawing Machine
الموديل: 17-2DST
المعلمات: Power control Double inverters control
Max. Quantity of drawing dies 17pcs *2
Inlet diameter Φ2.5—Φ3.0mm * 2
tensile strength ≦ 250 N / mm2
Outlet diameter Two lines:
Φ0.4—Φ1.6 mm
Mac. speed 1800m/min
Slip ratio of M/C 20%
Fixed-speed capstan slip ratio 15.5%
Main machine structure Casted
Capstan Zirconia
Drawing motor 90KW
Take-up motor 15KW
Max. Diameter of capstan Φ280mm
Max. Diameter of fixed-speed capstan Φ280mm
Take-up bobbin size Φ500mm、Φ630mm or according client’s requirement
Take-up method Pneumatic take-up machine without shaft
Traversing method 90W decelerating motor
Main machine transmission method High precision declining gear transmission
Take-up control PID displace detection and automatic control
Displace detection system Pneumatic swing arm type
Tension adjusting method Pneumatic
Max. take-up weight 500KGS
Lubrication system of drawing Fully immersing type
Brake method Pneumatic
Lubrication system of bearing and gear Oil pump supply and spray type lubrication
Service voltage 380V/50HZ or client’s requirement
Lubricate oil supply 150KGS/MIN
Wire Drawing Machine
الموديل: 14D
المعلمات: 1. Usage: Bare copper wire drawing
2. Inlet diameter: Ф1.6mm-Ф0.8mm
3. Outlet diameter: Ф0.25mm-Ф0.6mm
4. Maximum drawing speed: 1500MPM/MAX
5. Dies
Number: 14 dies (Customer self-provided) Ф25mm*8—12mmT
No. 1 is independent; No.2~13 are made of cast iron
Pedestal can be adjusted according to the capstan
6. Mechanism surface reduce rate:
From No.1 to No.13 15%
No.14 8%
7. Drawing method: 2 spools horizontal arrangement; horizontally sliding continuous drawing; spray lubrication type
8. Motor: Drive motor 20HP (15KW) AC frequency converter control
Spooling motor 5HP (4KW) AC frequency converter control
9. Frame: Welded by Q235 steel plate
10. Transmission: All transmission by timing belt;
11. Capstan: Tungsten carbide; two 12-tier capstans Ф316mm; the last capstan Ф268mm
12. Lubrication system: Spray type (without water pump & tank); independent lubrication pipe for No.1 &No.24 Die
13. Spool dimension: 300mm/Max. or according to customer’s requirements
Outer dia. Inner dia. Outer width Inner width Bore dia.
Ф300 Ф215 290 270 Ф127
14. Capacity for spool receiving: 25-50KG
15. Spooling control method: Weight balance by swing arm; automatically revise spooling tension
16. Bobbin loading & unloading type: single bobbin fixed with screw (with loading &unloading cart)
17. Brake: 10KG magnetic brake
18. Protection cover: Grille for transmission area; Stainless steel plate for drawing area;
Sealed cover with 3 inspection windows for spooling area.
19. Electric parts: Electric control parts made in China and Taiwan or overseas, top-class brand;
Relay: OMRON
Switch: LG
20. Power source: Three-phase 415V 50HZ
21. Traversing unit:
Traversing system: 110W synchronizing motor traversing; slide-rail bearing
Traversing width: 270mm/Max
22. Dimension: 1950L*1100W*1750H (mm)
23. Net weight: 2200KG
Wire Drawing Machine
الموديل: 24DW
المعلمات: 1. Application: Bare copper wire and copper-clad aluminum wire drawing
2. Inlet diameter: Ф1.2mm-Ф0.5mm
3. Outlet diameter: Ф0.3mm-Ф0.08mm
4. Maximum drawing speed: 2500 MPM/MAX
5. Dies: 24 dies (provide by customer self) Ф25mm*8
6. Ratio of M/C: Dies No. 1 to No.23 13%
Die No.24 8%
7. Drawing method: 4 shafts horizontally arrangement; sliding continuous drawing
8. Power: Main motor: 15HP (11KW) AC motor + frequency converter
Take-up motor: 5HP (3.7KW) AC motor + frequency converter
9. Frame: Cast
10. Transmission: Transmit by flat belts
11. Capstan: Coating by ceramic, horizontally arrangement
12. Lubricant system: Lubricant demand: 40L/MIN (without pump water and tank)
Spray lubricant above dies and capstans
13. Spool dimension: Ф 300mm (made according to customer)
14. Take-up capacity: 40-60KG
15. Bobbin loading & unloading; Screw pressing type, with cart
16. Traversing: 110W synchronizing motor traversing; 270mm/Max width
17. Spooling control method: Weight balance by swing arm; automatically revise spooling tension
18. Protection cover: Grille for transmission area;
19. Stainless steel plate for drawing area; Sealed cover with 3 inspection windows for spooling area.
20. Brake: 10KG electromagnetic brake
21. Weight: 2500KG
22. Dimension: 2300L*1300W*1700H (mm)
Wire Drawing Machine
الموديل: WDF400-7D
المعلمات: 1. Max Inlet: Φ8 mm
2. Outlet: φ3 mm
3. Diameter of capstan: 400 mm
4. Max. number of dies: 7
5. Mechanical elongation rate: 8%–46%
6. Max speed: 16 m/min
7. Main drawing motor power: 37KW*3, 22KW*3, 37KW*1 (AC)
8. Max.OD of payoff coil: 2000 mm
9. Spooler motor power: 15KW (AC)
10. Total main power of unit: 229 KW
Wire Drawing Machine
الموديل: 25-24DT
المعلمات: 1. Inlet diameter (tensile strength): 24×Φ1.80mm ~ 2.00mm (annealed wire, 250N/mm²)
2. Outlet diameter: 24×Φ0.15mm ~ 0.40mm
3. Number of produced wires: 24 pcs bare copper wires (2 layers, 24 lines)
4. Max. designed speed: 1800 m/min
5. Max. drawing passes: 25
6. Drawing capstan: 100mm with 12 grooves. Material: zirconia. Dynamic balance treated, featuring excellent wear resistance
7. Final capstan: 100mm with 12 grooves. Material: zirconia
8. Drawing dies: Max. φ28mm × Max. 12mm thickness
9. Cooling water supply: Max. inlet temperature 25℃; Differential pressure between cooling water inlet and outlet: 2 bar (2 × 10⁵ Pa)
10. Compressed air supply: 6 bar overpressure (7 × 10⁵ Pa), water-free and oil-free
11. Bobbin size: PND630 (or customized as per customer requirements)
12. Operation direction: Left to right (standard hand)
13. Noise level: ＜85 dbA (Excluding main motor)
14. Body colour: As per customer requirements
15. Production Efficiency (For Reference Only)
Wire Diameter | Line Speed | Daily Capacity (20h) | Monthly Capacity (26 days)
24×φ0.150mm | 22.0m/s | 5.7T | 148T
24×φ0.180mm | 22.0m/s | 8T | 208T
24×φ0.196mm | 22.0m/s | 9.7T | 252T
24×φ0.250mm | 22.0m/s | 15.6T | 405T
24×φ0.300mm | 20.0m/s | 20.6T | 535T
24×φ0.400mm | 12.0m/s | 22T | 572T
Wire Drawing Machine
الموديل: 14DT
المعلمات: 1. Usage: Bare copper wire drawing and annealing
2. Inlet diameter: Ф1.6mm-Ф0.8mm
3. Outlet diameter: Ф0.6mm-Ф0.25mm
4. Maximum drawing speed: 1500MPM/MAX
5. Dies
Number: 14 dies (Customer self provided) Ф25mm*8—12mmT
No. 1 is independent; No.2~13 are made of cast iron
Pedestal can be adjusted according to the capstan
6. Mechanism surface reduce rate:
From No.1 to No.13 15%
No.14 8%
7. Drawing method: 2 shafts arrangement; horizontally sliding continuous drawing
8. Motor: Drive motor 20HP (15KW) AC frequency converter CN control
Spooling motor 5HP (4KW) AC frequency converter CN control
9. Annealing voltage: D.C. 60V
10. Annealing ampere: D.C. 600A/MAX
11. Annealing power: 36KVA
12. Annealing method: D.C. three-section annealing
13. Frame: Welded by steel plate Q 235
14. Transmission: All transmission by flat belts;
15. Capstan: Chromium oxide; two 12-tier capstans; one single tier capstan for final drawing
16. Lubrication system: Spray type; lubrication oil 40 liter/min (without water pump & tank); independent lubrication pipe for No.1 &No.14 Die
17. Spool dimension: Outer diameter Ф300mm; (according to customer’s requirements)
Outer diameter Inner diameter Outer wide Inner wide Bore diameter
Ф300 Ф215 290 270 Ф127
18. Capacity for spool receiving: 40-60KG
19. Spooling control method: Weight balance by swing arm; automatically revise spooling tension
20. Bobbin: Made in steel45#; precision HRC25-27
21. Bobbin loading & unloading type: Single bobbin fixed with screw (with loading &unloading cart)
22. Traversing unit:
Traversing system: 110W synchronizing motor traversing; slide-rail bearing
Traversing width: 270mm/Max
23. Brake: 20 KG-M Electric magnetic brake
24. Protection cover: Grille for transmission area; Stainless steel plate for drawing area;
Sealed cover with 3 inspection windows for spooling area.
25. Electric parts: Electric control parts made in China and Taiwan or overseas, top-class brand;
26. Power source: Three-phase 380V50HZ (made according to customer’s requirements)
27. Electric control cabinet: 1000L*800W*1800H (mm)
28. Dimension: 2600L*1600W*1700H (mm)
29. Net weight: 3500KG;
Wire Drawing Machine
الموديل: 24DT
المعلمات: 1．Usage: Bare copper & copper-clad-aluminum wire drawing
2. Inlet diameter: Ф1.2mm-Ф0.6mm
3. Outlet diameter: Ф0.30mm-Ф0.1mm
4. Maximum drawing speed: 2000MPM/MAX
5. Drawing speed: Only for reference
Outlet diameter(mm) 0.08-0.1 0.1-0.15 0.15-0.25
With annealing(m/min) 1600-1400 1400-1200 1200-1000
Without annealing(m/min) 1800-2000 1800-1600 1500-1300
6. Dies
Number: 24 dies (Customer self provided) Ф25mm*8—12mmT
No. 1 is independent; No.2~23 are made of cast iron
Pedestal can be adjusted according to the capstan
7. Mechanism surface reduce rate:
From No.1 to No.23 13%
No.24 8%
8. Drawing method: 4 spools double tiers arrangement; horizontally sliding continuous drawing
9. Motor: Drive motor 20HP(15KW) AC frequency converter control
Spooling motor 3HP(2.2KW)AC frequency converter control
10. Annealing voltage: D.C. 70V
11. Annealing ampere: D.C. 250A/MAX
12. Annealing power: 16KVA
13. Annealing method: D.C. three-section annealing
14. Frame: Welded by steel plate
15. Transmission: All transmission by flat belts; improved transmitted by tooth belts
16. Capstan: Ceramic coated; four 11-tier capstans; one single tier capstan for final drawing
17. Lubrication system: Spray type; lubrication oil 40 liter/min (without water pump & tank); independent lubrication pipe for No.1 &No.24 Die
18. Spool dimension: Outer diameter DIN250mm; (or according to customer’s requirements)
19. Spooling control method: Weight balance by swing arm; automatically revise spooling tension
20. Bobbin loading & unloading type: single bobbin fixed with screw (with loading &unloading cart)
21. Traversing unit:
Traversing system: 110W synchronizing motor traversing; slide-rail bearing
Traversing width: 270mm/Max
22. Brake: 10 KG magnetic brake
23. Protection cover: Grille for transmission area; Stainless steel plate for drawing area;
Sealed cover with 3 inspection windows for spooling area.
24. Electric parts: Electric control parts made in China and Taiwan or overseas, top-class brand;
Relay: OMRON
Switch: LG
25. Power source: Three-phase 380/415V 50HZ According to clients’ requirement
26. Electric control cabinet: 1000L*800W*1800H(mm)
27. Machine Dimension: 2100L*1600W*1700H (mm)
28. Weight: 3000KG;
Wire Drawing Machine
الموديل: 9DST
المعلمات: 1. Usage: Bare copper wire drawing
2. Drawing method: 2 shafts horizontal arrangement
3. Inlet diameter: Ф2.5-Ф3mm
4. Outlet diameter: Ф1.0-Ф2.8mm
5. Maximum mechanical speed: 1200m/min
Ф0.8-Ф1.5mm speed：1000-1200m/min
Ф1.5-Ф2.0mm speed：800-1000m/min
Ф2.0-Ф2.78mm speed：500-800m/min
6. Dies
Number: 9dies (Customer self provided);
Ф28mm×15mmT或Ф25mm×15mmT
7. Mechanism surface reduce rate:
From No.1 to No.8： 19.5%
No.9： 16%
8. Drawing lubrication: Fully immersing type
9. Lubrication oil requirement: 150 liter/min
10. Drive motor: AC55KW induction motor
11. Spooler motor:： AC11KW induction motor
12. Traversing: Servo motor with limit detection switch
13. Safety door: sliding door
14.
Power supply: Provide the required total power
Three-phase voltage ～AC 3×380 (±10%)
Single-phase voltage ～AC 220 (±10%)
Power supply frequency 50 Hz (±2%)
Compressed air：
Work pressure 0.6～0.7 Mpa
Fluctuation value +0.02 Mpa
Dew point -25 ℃
Flow rate 200 L/min
Water requirements:：
Work pressure 0.2-0.4 Mpa
Temperature ≤25 ℃
PH 7～8
Flow rate 420 L/min
Note: The cooling water must not contain suspended solids, minerals, metal impurities, insoluble or corrosive substances.
Wire Drawing Machine
الموديل: 24-2DT
المعلمات: 1． Usage: Bare copper wire drawing
2. Inlet diameter: 2×Ф0.6mm-Ф1.2mm
3. Outlet diameter: 2×Ф0.1mm-Ф0.3mm
4. Maximum drawing speed: 2000MPM/MAX
5. Dies
Number: 24 dies×2 (Customer self provided) Ф25mm*8—10mmT
No. 1 is independent; No.2~23 are made of cast iron
Pedestal can be adjusted according to the capstan
6. Mechanism surface reduce rate:
From No.1 to No.23 13%
No.24 8%
7. Drawing method: 4 spools double tiers arrangement; horizontally sliding continuous drawing
8. Motor: Driving motor 22KW AC frequency converter control* 1 set
Spooling motor 2.2KW AC frequency converter control*2sets
9. Annealing voltage: D.C. 70V
10. Annealing ampere: D.C. 600A/MAX
11. Annealing power: 42KVA
12. Annealing method: D.C. four-section annealing
13. Frame: Welded by steel plate
14. Transmission: drawing transmission by timing belts, other by flat belts.
15. Capstan: Ceramic coated; four 11-tier capstans; one single tier capstan for final drawing
16. Lubrication system: Spray type; lubrication oil 40 liter/min (without water pump & tank); independent lubrication pipe for No.1 &No.24 Die
17. Spool dimension: Customized
18. Capacity for spool receiving: 25KG*2
19. Spooling control method: Weight balance by swing arm; automatically revise spooling tension
20. Bobbin loading & unloading type: double-bobbin pneumatic take-up.
21. Traversing unit:
Traversing system: step motor control, traversing speed adjustable
22. Brake: by brake motor control, machine automatically brakes upon power supply cut off (UPS is not required.)
23. Electric parts: Electric control parts made in China and Taiwan or overseas, top-class brand;
24. Power source: Three-phase 415V 50HZ
25. Tension: Use senor
26. Pulley: Ceramic coated aluminium pulley
Wire Drawing Machine
الموديل: 20-4DT
المعلمات: 1. Usage: Bare copper wire drawing
2. Inlet diameter: Max. 4×Φ1.60 mm
3. Outlet diameter: 4×Φ0.15 mm – Φ0.50 mm
4. Max. drawing speed: 1500 MPM
5. Drawing Dies: Quantity: 20 dies ×4 (Customer supplied), Φ25mm × 8–10mm thickness. No.1 die is independent; No.2~19 dies are cast iron. The base can be adjusted according to capstan size.
6. Slip Ratio: No.1 ~ No.19: 15%; No.20: 8%
7. Drawing Method: 4-spool four-tier arrangement; horizontally sliding continuous drawing
8. Motor: Main drawing motor: 37KW, AC variable frequency control; Spooling motor: 3.7KW×4 (AC variable frequency control) + 11KW×1
9. Annealing voltage: DC 70V
10. Annealing current: Max. DC 1200A
11. Annealing power: 84KVA
12. Annealing method: DC annealing
13. Frame: Steel plate welded structure
14. Transmission: Drawing section driven by timing belts; other sections by flat belts
15. Capstan: Ceramic coated aluminum; four 10-tier capstans, including two final drawing capstans
16. Lubrication System: Spray type; lubricating oil flow 40 L/min (without water pump & water tank); independent lubrication pipe for No.1 & No.20 die
17. Bobbin size: Customized as per customer requirement
18. Take-up capacity: 25kg×4 for four-bobbin spooler, or Max.500kg×1 for single bobbin (QD630E)
19. Spooling control: Weight balance via swing arm; automatic adjustment of take-up tension
20. Bobbin loading & unloading: Pneumatic take-up
21. Traversing Unit:
Four-bobbin spooler: Stepper motor control, adjustable traversing speed
QD630E single bobbin: Stepper motor control, traversing width adjustable via timing motor
22. Brake: Controlled by brake motor; machine brakes automatically upon power cut-off (UPS not required)
23. Electrical components: Top-class brands from China and overseas
24. Power supply: Three-phase, 380/415V, 50Hz (customizable)
25. Tension: Controlled by tension sensor
26. Pulley: Ceramic coated aluminium pulley
Wire Drawing Machine
الموديل: LHD450-13DT
المعلمات: 1. Max Inlet Diameter: Φ8 mm
2. Outlet Diameter: Φ1.2–Φ4.0 mm
3. Diameter of capstan: 450 mm
4. Max. number of dies: 13
5. Reduction ratio: 1.368–1.20 (13 dies adjustable, the last pass is adjustable)
6. Max drawing speed: 25 m/s
7. Main drawing motor: 280 KW
8. Final capstan motor: 75 KW
9. Take-up bobbin: PND500 / PND630 mm
10. Pitch of traversing: 6.5 mm
11. Max. OD of payoff coil: 2000 mm
12. Annealing power: 60V × 6000A (DC)
13. Double spooler motor: 2 × 30 KW (2 sets)
14. Drop coiler motor: 18.5KW-6P
15. Total main power of unit: 800 KVA
16. Overall machine dimension: 32550 × 4500 × 3820 mm
17. Gross weight: 40440 Kg
Wire Drawing Machine
الموديل: 17DST
المعلمات: 1.Usage: Bare copper wire drawing and online annealing
2.Inlet diameter: Ф3.5mm-Ф2.5mm
3.Outlet diameter: Ф1.6mm-Ф0.4mm
4.Maximum mechanical speed: 1800M/MAX (1500M/MAX with annealing)
5.Drawing speed: Only for reference
Outlet diameter(mm) 0.40-0.80 0.80-1.60
Drawing speed(m/min) 17DS 1800-1200 1300-600
Drawing speed(m/min) 17DST 1000-1500 1300-600
Percentage elongation of wire 25% 30%
6.Dies
Number: 17 dies (Customer self-provided); Ф30mm-15mmT or Ф25mm-10mmT
The last die: Ф25mm-10mmT
Pedestal can be adjusted according to the capstan
7.Mechanism surface reduce rate:
From No.1 to No.16 20%
No.17 15.5%
8.Drawing lubrication: Fully immersing type
9.Drawing method: 4 shafts horizontal arrangement
10.Lubrication oil requirement: 100 liter/min
11.Main driving motor: 55KW
12.Annealing motor: 7.5KW
13.Spooling motor: 15KW
14.Traversing: Traversed by 90W motor with position-limited switch
15.Safety door: sliding door
Wire drawing machine
الموديل: 22DTA
المعلمات: 1. Usage: Bare copper wire drawing and annealing
2. Inlet diameter: Ф1.0mm-Ф1.6mm
3. Outlet diameter: Ф0.15mm-Ф0.6mm
4. Maximum drawing speed: 2000MPM/MAX
5. Dies
Number: 22 dies (Customer self provided) Ф25mm*8—12mmT
No. 1 is independent; No.2~21 are made of cast iron
Pedestal can be adjusted according to the capstan
6. Mechanism surface reduce rate:
From No.1 to No.21 15%
No.22 8%
7. Drawing method: 4 spools horizontal arrangement; horizontally sliding continuous drawing
8. Motor: Drive motor 25HP (18.5KW) AC frequency converter control
Spooling motor 3HP (2.2KW) AC frequency converter control
9. Annealing voltage: D.C. 60V
10. Annealing ampere: D.C. 600A/MAX
11. Annealing power: 36KVA
12. Annealing method: D.C. three-section annealing
13. Frame: Welded by steel plate
14. Transmission: All transmission by timing belts;
15. Capstan: Ceramic; four 10-tier capstans; one single tier capstan for final drawing, with extra keyslot
16. Lubrication system: Spray type; lubrication oil 40 liter/min (without water pump & tank); independent lubrication pipe for No.1 &No.22 Die
17. Spool dimension: Outer diameter DIN200/250; (According to customer’s requirements)
18. Capacity for spool receiving: 25 KG
19. Spooling control method: Weight balance by swing arm; automatically revise spooling tension
20. Bobbin loading & unloading type: single bobbin fixed with screw (with loading &unloading cart)
21. Traversing unit:
Traversing system: 110W synchronizing motor traversing; slide-rail bearing
Traversing width: 270mm/Max
22. Brake: 10 KG-M magnetic brake
23. Protection cover: Grille for transmission area; Stainless steel plate for drawing area;
Sealed cover with 3 inspection windows for spooling area.
24. Electric parts: Electric control parts made in China and Taiwan or overseas, top-class brand;
25. Power source: Three-phase 380V 50HZ (made according to customer’s requirements)
26. Electric control cabinet: 1000L*800W*2000H (mm)
27. Machine Dimension: 3500L*1600W*1700H (mm)
28. Net weight: 3500 KG;
Wire Drawing Machine
الموديل: WDF450-13DT
المعلمات: Main technical parameters
3.1 Inlet diameter Φ8mm
3.2 Outlet diameter Φ1.2mm～Φ4.0mm
3.3 Die number 13
3.4 The diameter of capstan 450mm
3.5 Max speed 1800m/min
3.6 Drawing motor 4*45KW+8*37KW (WANNAN AC motor)
3.7 Traction motor 1×45kw(WANNAN AC motor)
3.8 Double spooler motor 30KW*2(WANNAN AC motor)
3.9 Drop coiler motor 22KW (WANNAN AC motor)
3.10 Main take-up motor 45KW (WANNAN AC motor)
3.11 Outer diameter of the drawing die(the die base adopts a sealed pressure injection mold base, with forced cooling and forced lubrication): Φ55mm * 35mm
3.12 Mechanical elongation rate (variable speed ratio, controllable deviation): 8% - 48% (within this range, different speed ratios can be freely set to reduce mold changes, or no mold can be used in the middle)
3.13 Rotating die motor power：0.55KW
3.14 Frequency converter INOVANCE
3.15 PLC SIEMENS
wire drawing machine
الموديل: 25-16DT
المعلمات: 1.Inlet diameter(tensile strength): 16*Φ1.50mm ~ 1.80mm (annealed wire 250N/mm2)
2.Outlet diameter: 16*Φ0.15mm ~ 0.40mm
3.Number of produced wires: 16× copper bare / tinned copper (2 layers, 16 wires)
4.Max. designed speed: 1800m/min
5.Drawing passes: Max.25 .
6.Drawing rings: 100mm with 8 grooves . For separate and parallel wire guidance Material: zirconia.
7.Final drawing ring: 100mm 8 grooves. For separate and parallel wire guidance Material: zirconia
8.Drawing dies: φ max. 28mm x max. 12 mm thickness (Drawing dies not included)
9.Cooling water supply: Max. 25℃ inlet temperature;
Differential pressure between cooling water inlet and outlet is 2 bar (2 x 10^5 Pa)
10.Compressed air supply: 6 bar overpressure (7 x 10^5 Pa) , water- and oil free
11.
Bobbin : PND630 ( Or according to customer requirements)
12.Operation direction: from left to right
Noise level:< 85 dbA (Except for main motor )
13.Colour: According to customer requirements
14.Production efficiency（Only for reference）
Wire Diameter. Line speed Elongation
16*φ 0.150mm at v =22.0m/s ≥18%
16 *φ 0.180mm at v =24.0m/s ≥20%
16*φ 0.200mm at v =24.0m/s ≥20%
16 * φ 0.254mm at v =22.0m/s ≥25%
16 * φ 0.293mm at v =20.0m/s ≥25%
16 * φ 0.400mm at v =14.0m/s ≥25%
1. Production efficiency for tinned wires at production speeds reduced by about 20%.
2. In order to meet the requirements of continuous production lines of the above specifications, customers must provide high-quality copper rods of high grade. Continuous production without hollow or impurity breakage phenomenon.
3.The above efficiency is the actual value, depending on factors such as wire quality, wire drawing die quality, lubricating oil quality, wire reel quality, and operator proficiency.
4.Meet the wire surface dry, no water phenomenon. No additional felt or fan assistance is required
معرض الشركة
الشهادات والجوائز
قصص النجاح
Cable manufacturer
energy saving 35%, Reduce labor costs,stable operation, zero major failures
low noise,full automatic, Address the issue of inconsistent wire tightness and uneven parameters at the root, thereby reducing labor costs and energy consumption costs.
مقاطع فيديو الشركة والمنتجات
مقدمة عن الشركة وجولة في المصنع
⏱ Duration: 3:45 | 👁 Views: 15,230
عرض المنتج - Kestrel K-1
⏱ Duration: 5:12 | 👁 Views: 28,450
عرض الابتكار التقني
⏱ Duration: 4:30 | 👁 Views: 12,890
شهادات العملاء وقصص النجاح
⏱ Duration: 6:20 | 👁 Views: 9,650
هل أنت مستعد لتغيير حياتك؟
اتصل بنا الآن لتعرف كيف تلبي منتجاتنا احتياجاتك.