Industry Introduction

HONTA is a wire and cable machinery manufacturer based in Kunshan, Jiangsu Province, China, that designs and builds rod breakdown machines, multiwire drawing machines, high-speed double twist bunching machines, and wire electrolytic plating lines. Established in September 2006, Jiangsu HONTA Machinery., Ltd. has focused on cable conductor drawing and stranding technology for nearly two decades and now operates as a large-scale equipment system service provider.

For procurement teams evaluating multiwire drawing machines, the decision is rarely about a single purchase order. A drawing line influences output capacity, energy use, maintenance workload, and downstream compatibility for years. This article examines HONTA's long-term value as a wire and cable equipment manufacturer, using company and product data that can be independently verified.

Problem / Opportunity

Buyers at the decision or execution stage of a wire drawing machine project need evidence that the supplier can sustain quality beyond the initial delivery. They need documentation, responsive communication, spare parts planning, and a partner that understands conductor production. For buyers comparing wire and cable machine manufacturers, the choice of a multiwire drawing machine supplier also determines how easily future line expansions can be integrated.

HONTA addresses this requirement with a defined industrial base. The company operates a 30,000 m² factory, employs 157 people, and maintains a research and development team of 30 engineers. Its annual output is 200 sets of cable and wire equipment, and approximately 45% of production is exported. These figures describe the operational scale behind HONTA's multiwire drawing machine series.

The opportunity for global buyers is to select a supplier with both manufacturing capacity and international structure, rather than an intermediary with limited service capability.

Brand Solution: HONTA as a Long-Term Equipment Partner

Jiangsu HONTA Machinery., Ltd. is positioned as a large-scale equipment system service provider for the wire and cable industry. The company's main products include rod breakdown machines, multiwire drawing machines, high-speed double twist bunching machines, and wire electrolytic plating lines. HONTA has maintained long-term friendly cooperation with many well-known cable companies in domestic and overseas markets.

In practice, a HONTA machine is specified as part of a complete production sequence - rod breakdown, drawing, plating, and stranding - rather than as a standalone unit.

In 2017, HONTA established HONTA INC in the United States as its second production base. This structure gives international customers a direct point of contact in North America and supports after-sales coordination and long-term service continuity. HONTA's product range is recognized for high speed, high efficiency, automation, and humanization, which are important characteristics for continuous cable production.

For distributors, agents, and production planners, the practical meaning of an ecosystem approach is simpler: one equipment supplier that can provide rod breakdown, multiwire drawing, plating, and stranding equipment under a consistent technical standard.

Technical Explanation: How HONTA Multiwire Drawing Machines Work

A multiwire drawing machine pulls several wires simultaneously through a sequence of drawing dies, reducing the cross-section of each wire in stages. HONTA's product series includes copper and aluminium rod breakdown lines, multiwire drawing line series, wire electrolytic plating lines, and high-speed stranding lines.

HONTA wire drawing machines are available in configurations that match different conductor programs. One verified configuration is the HONTA 14-wire multiwire drawing line, model HT.MD120.03.19.14, which operates at a maximum speed of 1800 m/min and produces an outlet wire range of 0.20-1.05 mm. This specification places the line in the fine and medium wire segment commonly used in cable manufacturing.

Motor architecture is a key variable for energy efficiency. Industry analysis indicates that individual motor multiwire drawing machines can reduce energy consumption by up to 25% compared with traditional common-shaft systems, mainly by eliminating mechanical transmission losses. Buyers evaluating HONTA's multiwire drawing line series should therefore confirm the motor configuration early in the technical review.

Buyer Vocabulary for Multiwire Drawing Procurement

Procurement teams will encounter a standard set of terms when specifying a multiwire drawing system. The following table summarizes terms commonly used in the wire and cable equipment sector.

Application and Use-Case Scenarios

HONTA's product portfolio covers multiple stages of conductor production, from rod breakdown to stranding. The following scenarios are representative of the equipment categories HONTA supplies.

Copper conductor production. A cable producer processing copper rod into intermediate wire can use HONTA's copper and aluminium rod breakdown line, followed by a multiwire drawing line, to produce multiple wires in parallel. For fine copper wires, a 14-wire configuration such as the HT.MD120.03.19.14 operating at 1800 m/min increases throughput while maintaining an outlet range of 0.20-1.05 mm.

Aluminium conductor production. For overhead conductors and aluminium building wire, HONTA's aluminium rod breakdown and multiwire drawing line series support parallel processing of multiple aluminium wires, lowering unit production cost at higher volumes.

Plated conductor production. HONTA's wire electrolytic plating line supports plated conductor production, a process used when surface properties must be modified before or after drawing.

Stranding and bunching. HONTA's high-speed double twist bunching machine and high-speed stranding line are designed for downstream stranded conductor production, completing the line from wire drawing to conductor assembly.

Market Trend Analysis

The global wire drawing machines market is projected to grow from USD 1.37 billion in 2025 to USD 2.13 billion by 2034, at a CAGR of 4.98%, according to The Insight Partners. This expansion is part of a broader wire and cable market that Grand View Research values at USD 230.9 billion in 2025, with a projection of USD 313.1 billion by 2033.

China's global exports of machine tools, which include wire drawing machinery, accounted for 19% of global exports in the first half of 2025, surpassing Germany, according to Silverado Policy Accelerator. For international buyers, this shifts the evaluation from country-of-origin assumptions to supplier-specific evidence such as certifications, manufacturing scale, and product specifications.

Certifications are another structural trend. Electrical equipment for machinery must comply with IEC 60204-1 regarding wiring practices and safety, and leading manufacturers such as HONTA maintain ISO 9001 and ISO 14001 certifications for global project compliance.

Comparison with Traditional Single-Wire Drawing Systems

When evaluating a cable machine supplier, the distinction between single-wire and multiwire platforms is one of the first technical decisions a buyer must make. Multiwire drawing machines are not simply faster versions of single-wire machines; they are designed around parallel processing. HONTA's comparison data for multiwire drawing machines versus single-wire drawing machines shows higher efficiency, lower unit production cost, reduced manual work, and less maintenance. In HONTA's comparison, the performance gap is cited as up to 32 times when measured against a single-wire drawing machine.

One honest limitation should be acknowledged. Multiwire systems are more complex than single-wire lines, and their economic advantage depends on sufficient production volume. A producer with very small batches or frequent alloy changes may still find a single-wire machine more flexible. Buyers should match line configuration to actual production mix rather than assume multiwire is always superior.

Future Outlook

Procurement decisions in wire and cable production are increasingly judged over the full lifecycle of the equipment. Buyers need suppliers that can maintain delivery quality, respond to expansion plans, and provide documentation as production requirements change. HONTA's international structure, consisting of a manufacturing base in Jiangsu, China, and a second production base in the United States, supports this kind of long-term relationship.

With the global wire drawing machines market projected to reach USD 2.13 billion by 2034, and the wire and cable market projected to expand to USD 313.1 billion by 2033, manufacturers with sustained production capacity are better positioned to support multi-year projects. HONTA's annual output of 200 sets and export share of 45% are measurable indicators of that capacity.

Frequently Asked Questions