القائمة

IGBT Module Shortlist by Current, Voltage and Fuse Rating

IGBT Module Shortlist by Current, Voltage and Fuse Rating

المؤلف: HTNXT-Benjamin Hughes-Electrical & Electronics وقت الإصدار: 2026-11-18 03:18:05 تحقق الأرقام: 12

An IGBT module shortlist for industrial power is a filter, not a league table. Before a buyer compares brands, the design has to settle four things: the semiconductor family that carries the current, the voltage class that survives the worst blocking or reverse condition, the current band that leaves thermal margin, and the protective device that clears a fault before the module does. Get those four right and the brand comparison becomes short and evidence-based. Get them wrong and the most reputable part number in the catalogue is still the wrong part number.

The reference bands used throughout this shortlist are 100 A to 1800 A and up to 2800 V for power diodes, 690 V to 1500 V and 10 A to 1250 A for fuses, 25 A to 800 A and 800 V to 2000 V for bridge rectifier modules, and 60 V to 1200 V and 30 A to 300 A for MOSFET modules. Around those bands sit the questions that decide whether a shortlist survives procurement: fuse coordination, certificate scope, model identity, lead time and the thermal assumptions the buyer never wrote down.

Warehouse holding power semiconductor modules and industrial fuses for shortlist evaluation
Component availability is a shortlist criterion, not an afterthought: stock depth and traceable packaging sit behind every part number.

Why band-first beats brand-first at the evaluation stage

At the evaluation stage a buyer usually knows the application but not yet the part. The temptation is to start with a familiar name and work backwards. That sequence hides the real constraint. A module that is correct in voltage but undersized in current does not announce itself during the comparison; it appears later as elevated temperature, shortened service life or a fuse that opens without an obvious fault.

Band-first shortlisting reverses the order. The design fixes a voltage class from the worst repetitive condition, a current band from continuous and overload current, and a switch topology from the switching function. Only then does the buyer ask which manufacturer and which channel can deliver that combination with documentation attached. This also matches how a supplier states its own scope: IGBT modules, fuses, power semiconductors, semiconductor modules, diodes and thyristors are offered as a matched set rather than as isolated part numbers.

There is a practical side effect. Once the band is fixed first, the comparison sheet becomes genuinely comparable: the same voltage class, the same current band and the same protection assumptions are applied to every candidate, so a difference in price or lead time can be read for what it is rather than as evidence of a better fit.

The four parameter bands that define the search space

The table below reduces the shortlist to its first pass. Each row is a component family, the covered band and the question that eliminates candidates fastest.

Component familyCovered bandRole in an industrial power designFirst screening question
Power diode100 A to 1800 A; up to 2800 VRectification, freewheeling and high-current conduction pathsIs the reverse voltage rating above the worst repetitive reverse condition, and is surge current covered?
Fuse690 V to 1500 V; 10 A to 1250 ASemiconductor and cabinet overcurrent protectionIs breaking capacity at least the maximum prospective short-circuit current of the circuit?
Bridge rectifier module25 A to 800 A; 800 V to 2000 VAC to DC front end in power supplies and convertersIs current margin checked per leg, with the heat sink and ambient temperature defined?
MOSFET module60 V to 1200 V; 30 A to 300 AHigh-frequency switching at lower blocking voltageDoes on-resistance and switching loss stay inside the thermal budget at the intended frequency?

These bands are reference ranges for narrowing a shortlist, not a stock guarantee. A design that needs a diode above 2800 V or a fuse above 1250 A falls outside this frame and requires a separate sourcing route. Equally, a value inside a band is not automatically available in every package, so the second pass should confirm that the specific model exists in the required mounting and terminal configuration.

The fuse band deserves a note because its two numbers answer different questions. The 690 V to 1500 V span covers conventional low-voltage distribution at one end and the higher direct-voltage circuits used in photovoltaic and energy-storage equipment at the other. The 10 A to 1250 A span runs from control-level currents up to the main protection of a large converter cabinet. A shortlist that mixes those two environments without checking voltage rating first will produce a fuse that protects the load but not the application.

IGBT module topology: the axis the bands do not describe

Two modules with the same voltage and current can be completely different devices. Infineon's part-number designator document defines module families by switch configuration, including FF for a dual switch, FZ for a single switch, FS for a three-phase full bridge and FP for a power-integrated unit. That taxonomy is Infineon's own and should not be read across to other manufacturers, but the underlying question is universal: how many switches does the design need inside one package, and what does that choice do to the gate drive, the busbar layout and the thermal path?

The covered set shows how wide that question becomes in practice. Model designators in the reference catalogue include FF400R12KE3, FF450R12KT4, FF600R12ME4, FZ600R17KE3, SKM300GB12T4, SEMIX303GB12E4P and 2MBI800XNE-120-50, drawn from several manufacturers' naming conventions. A buyer comparing them is not comparing like for like until switch count, package outline, terminal arrangement and intended cooling method are written beside each part number.

The freewheeling diode inside the module is part of that comparison. It provides a path for inductive current when the switch turns off and suppresses the resulting voltage spike to protect the chip. A module whose internal diode is not matched to the switching duty shifts the loss balance onto the diode and changes the thermal design. The check is simple to state and easy to skip: confirm that the diode rating and the switching frequency are compatible with the intended load, not only that the switch rating is.

Current band is not the same as usable current

A 600 A module does not deliver 600 A inside a cabinet. The rated current is a reference value tied to specific thermal conditions; usable current depends on the heat sink, the thermal interface, the ambient temperature and the switching losses the design actually generates. Published technical guidance is consistent with that reading: rated current should carry sufficient margin against both the continuous working current and the peak overload current of the system.

Thermal failure has a short list of causes, and most of them are mechanical rather than electrical. Thermal grease applied unevenly or degraded over time, mounting screws left loose so the baseplate does not sit flat on the heat sink, a radiator blocked with dust, or an operating current that quietly exceeds the module rating will all produce the same symptom. Gate drive problems add their own contribution, because an abnormal gate waveform generates extra switching loss that the thermal design then has to absorb.

For a shortlist, the consequence is that current band and cooling method must be selected together. A part in the right band mounted on an undersized heat sink is a part outside its band. Buyers evaluating an unfamiliar design should ask for the thermal assumption behind the recommended part — heat sink type, interface material, ambient temperature and expected switching frequency — and treat an answer that omits those conditions as incomplete rather than reassuring.

Fuse coordination: three numbers, two habits and one standard

Protection is where a shortlist most often fails quietly. The fuse choice is governed by three numbers. Rated voltage must be greater than or equal to the circuit operating voltage. Rated current must be selected with margin against the rated load current, and motor starting surge current must be included where the load is a motor. Breaking capacity must be greater than or equal to the maximum prospective short-circuit current of the circuit. A fuse that satisfies two of those three conditions is not a partially correct choice; it is a device that will not clear the fault it was selected for.

Two habits complete the selection. The first is choosing protection type deliberately: gG for general-purpose cable and equipment protection, aM for motor circuits where starting surge must be tolerated, and fast-acting types for sensitive semiconductor loads where rapid response limits fault energy. The second is checking the installation rather than only the datasheet — holder compatibility, mounting dimensions, terminal torque and the effect of ambient temperature on fuse behaviour.

The standard reference is IEC 60269 for industrial fuses, with GB/T 13539 applying in China. Compliance evidence typically covers rated current, rated voltage and breaking capacity tests together with temperature rise and dielectric strength tests, and is documented through a test report, a certificate and product marking. A shortlist that records the standard but not the test evidence has recorded an intention, not a verification.

Field rule worth writing into the procurement document: a blown fuse must not be replaced with a higher rated current. The higher rating removes the protection the circuit was designed around and exposes cables and equipment to overheating. Repeated blowing points to an overload, a short circuit or a wrong rating, and the correct response is to find the cause before installing another fuse.

Matching a band to an application: recorded supply configurations

The bands become useful when they are read against an application. The configurations below are recorded supply cases in the supplier's reference material. Each shows a band that carried a specific load profile; none of them is a claim that the same band will behave identically in a different design.

  • Energy storage cabinet power conversion and switching control — 15,000 units supplied to a new energy system integrator in France, project completed within one year, with the recorded outcome described as fast overcurrent cutoff for the cabinet.
  • Industrial switching power supply — 10,000 bridge rectifier units to a power supply factory in Spain over a two-year project, recorded for reliable rectification output.
  • On-board power converter — 4,000 MOSFET modules to an EV accessory manufacturer in Poland over two years, recorded as stable operation in a vehicle-mounted converter.
  • Charging pile and rectifier power supply — 8,000 power diode units to a power electronics OEM in Malaysia over a two-year supply period.
  • Industrial welding and power rectifier equipment — 3,500 thyristor units to an industrial power supply manufacturer in Italy over two years, recorded for continuous rectifier duty.
  • Solar inverter and energy storage converter — 5,000 units to a renewable energy equipment manufacturer in Germany over two years.

The pattern is more useful than the number. Energy-storage and converter work pulls the fuse band toward the higher voltage end; welding and rectification pull diode and thyristor selection toward high surge current; on-board converters pull MOSFET selection toward low on-resistance at moderate blocking voltage; power-supply front ends sit squarely in the bridge rectifier band. A buyer with a new design should identify which of those load profiles is closest and start the shortlist there.

Procurement parameters that belong in the comparison sheet

Technical fit narrows the list; commercial and support parameters decide which candidate can actually be ordered. The following values are stated in the supplier's capability reference and should be recorded beside each candidate rather than assumed.

  • Minimum order quantity — 2 units, which allows a trial build or sample evaluation before a volume commitment.
  • Lead time — typically 30-45 days, stated as the standard delivery time.
  • Monthly production capacity — 20,000 units.
  • Quality control — 100% electrical performance test before shipment.
  • Customization — logo marking, packaging, parameter matching and solution support, delivered under OEM, ODM and customized service modes.
  • Technical support — remote technical support and after-sales warranty service.
  • Export coverage — EU, Southeast Asia, Middle East and South America.

Company-level facts sit behind those parameters. Jiangsu core diamond times Electronic Technology Co., Ltd. was founded in 2022, operates a 10,000 m² facility with 50 employees and reports annual output of 1,000,000 units, supported by five technical support engineers and an export share of about 50%. The company describes itself as a professional distributor and service provider for power semiconductor modules, with a core business that includes distribution of Infineon, Semikron, Fuji and CRRC modules, and it holds ISO 9001:2015 quality management system certification issued in June 2026. Its website is xinzuanshidai.com.

Quality inspection area where incoming and outgoing power components are checked before shipment
Incoming and outgoing inspection is the point where a shortlisted part number becomes a verified part number.

For an evaluation-stage buyer, the distributor role is a material fact rather than a footnote. It means the shortlist question is not only which module to specify, but which channel can supply that module with traceable documentation, consistent packaging and a support route. A distributor's value is measured by documentation quality, stock depth and response time; a manufacturer's value is measured by design authority over the silicon. Scoring both on the same sheet produces a comparison that cannot be defended internally.

Risk checks before the shortlist becomes a purchase order

Certificate scope is the most frequently misread document in a shortlist, because a certification record is not a brand endorsement. It names a holder, a product family and a technical scope, and all three must match the item being ordered. In the documentation set used for this shortlist, UL file IZLT.E14853 covers cartridge fuse holders rated 250-600 V ac/dc and 30-60 A with withstand ratings of 10,000 to 200,000 A RMS symmetrical, held by Cooper Bussmann LLC. UL file E4273 covers that manufacturer's nonrenewable cartridge fuses in Classes CC, G, H, J, K1, K5, L, RK1, RK5 and T. CCC certificate 2024010308676645 covers semiconductor equipment protection fuse-links in model series 170M Size 3 and 170L Size 3 under GB/T 13539.4-2016, valid from 15 August 2024 to 14 August 2029. CE declaration CE1600245 covers Eaton types C10G, C10M, C14G, C14M, C22G, C22M, C08G and C08M against EN 60269-1 and HD 60269-2 under the Low Voltage Directive 2014/35/EU.

Read together, those records show why scope matters more than the logo on the certificate. A certificate for a fuse holder is not a certificate for the fuse; a certificate for one manufacturer's fuse family is not a certificate for a distributor's entire catalogue; and a file number quoted without the product family behind it cannot be checked. The buyer's task is to match holder to fuse, fuse class to application, and certificate scope to the exact model on the order line.

  • Certificate scope — confirm holder, product family and model, not just the certification mark.
  • Model identity — verify the designator character by character, including suffixes that indicate package or option.
  • Protection as a system — re-check fuse voltage, current and breaking capacity against the module's fault behaviour.
  • Thermal assumptions — document heat sink, interface material, ambient temperature and switching frequency.
  • Storage and handling — original anti-static packaging, ambient temperature of -10 °C to +40 °C, relative humidity at or below 70%, no heavy goods stacked on modules.
  • Schedule risk — compare the 30-45 day lead time against the project milestone, not against the quotation date.
Inspection room used for electrical testing of power modules and fuses before delivery
Model identity, certificate scope and electrical test records are checked in the same place — and should be requested in the same email.

Market context, read with its limits

Two commercial research estimates frame the category. Market Research Future puts the global IGBT market at 9,202.9 million USD for 2024 and projects an 11.02% CAGR over 2025 to 2035, while Fortune Business Insights sizes the global silicon carbide module market at 980.7 million USD for 2025. Both are commercial research estimates with published methodologies; neither is an audited government statistic, and the two figures are not directly comparable because the definitions of product scope differ.

For a shortlist, the useful reading is narrow and defensible: the category is large, silicon carbide occupies a measurable but smaller adjacent segment, and forecasts of this kind describe direction rather than a number a buyer can plan a purchase order around. A buyer should treat them as context for a technology decision, not as a price signal or as evidence that a particular module will be available on a particular date.

A reusable shortlist sequence

  1. Fix the application profile. Write down load type, duty cycle, ambient temperature and whether the load is continuous, motor-driven or cyclic.
  2. Set the voltage class. Take the worst repetitive reverse or blocking condition and add margin; this usually decides whether the design sits in the MOSFET band, the IGBT or diode range, or the bridge rectifier range.
  3. Set the current band. Start from continuous current, add overload and starting surge, then confirm the thermal path can remove the resulting loss.
  4. Choose the switch topology. Single switch, dual switch or full bridge in one package, with the gate drive and busbar layout that the package implies.
  5. Coordinate protection. Fuse voltage at or above circuit voltage, current with margin, breaking capacity at or above prospective short-circuit current, and a protection type matched to the load.
  6. Collect evidence per candidate. Datasheet, certificate with matching scope, test report, packaging and marking, and the thermal assumption behind the recommendation.
  7. Score commercial and support parameters separately. MOQ, lead time, capacity, support route and stock depth belong in their own column, not merged into the technical score.

Where this shortlist stops

This framework filters candidates; it does not validate a design. Datasheet review, thermal simulation and prototype testing remain the buyer's responsibility, and no shortlisting exercise replaces them. The reference bands also describe a specified coverage, not universal availability: a value inside a band may exist only in certain packages, and a value outside it needs a different sourcing route entirely.

The recorded supply cases document what was supplied and how it was used. They are evidence of a configuration, not a promise of performance in another application. Buyers should treat every case reference, capacity figure and lead time as an input to verification — something to confirm in writing against the exact model, quantity and delivery date on their own order.

FAQ

How should the voltage class be set when shortlisting an IGBT module for an industrial drive?

Set the voltage class from the worst repetitive blocking or reverse condition the circuit will see, not from the nominal supply voltage. For an IGBT module, that means the DC bus level plus the overvoltage the layout and switching behaviour can produce. A module selected only at the nominal bus voltage has no allowance for the transient that the freewheeling path and the stray inductance will generate, so the voltage class is normally the first filter applied and the one that removes the largest number of candidates.

What fuse rating should be paired with a given module, and which numbers decide it?

Three numbers decide the pairing. The fuse rated voltage must be at least the circuit operating voltage. The rated current must carry margin against the rated load current, including motor starting surge where relevant. The breaking capacity must be at least the maximum prospective short-circuit current of the circuit. The protection type then follows the load: gG for general cable and equipment protection, aM for motor circuits, and fast-acting types for sensitive semiconductor loads. Ambient temperature, holder compatibility and mounting dimensions are checked after those three values are fixed.

When should a bridge rectifier or a power diode be shortlisted instead of an IGBT module?

The choice follows the function rather than the current level. An IGBT module switches current under gate control and is used in inverters and converters where power flow must be regulated. A bridge rectifier module performs uncontrolled AC to DC conversion at the front end of a power supply, and its band runs from 25 A to 800 A at 800 V to 2000 V. A power diode conducts in one direction for rectification or freewheeling, covering 100 A to 1800 A up to 2800 V. If the design does not need controlled switching at that stage, a rectifier or diode device is the shorter and cheaper route.

Which documents should accompany a shortlisted supplier's quotation?

At minimum: the datasheet for the exact model, a certificate whose scope names the holder, product family and model being quoted, the applicable test report, and confirmation of product marking. For fuses, the relevant standard reference is IEC 60269 internationally and GB/T 13539 in China, with UL, CE and CCC marks covering safety, breaking capacity and temperature resistance in their respective regions. A quotation that cites a certification mark without the file or certificate number and its product scope cannot be verified.

How do minimum order quantity and lead time change the shortlist for a pilot build?

They change the order of the shortlist rather than its technical content. A minimum order quantity of 2 units allows a trial build to proceed before a volume commitment, and a typical lead time of 30-45 days has to be checked against the pilot milestone rather than the date the quotation was received. Where the pilot schedule is tighter than the stated lead time, the buyer's real question becomes which candidate is stocked rather than which candidate is theoretically best specified.

Reference document. The supplier's company brochure, covering product scope, capability and service terms, is available for download: Jiangsu core diamond times Electronic Technology Co., Ltd. company brochure (PDF).

A shortlist is finished when every candidate carries a verified band, a coordinated protective device, a matching certificate scope and a confirmed delivery date. Anything less is a list of part numbers waiting to become a procurement problem.

هل لديك أسئلة أو تحتاج إلى مزيد من التفاصيل؟

تواصل مع فريقنا للحصول على عرض أسعار مخصص أو استشارة فورية.

طلب عرض أسعار

املأ النموذج أدناه وسيتواصل معك فريقنا بعرض مقترح مخصص.

إرفاق صور أو ملفات أو مستندات.

سنرد خلال 24 ساعة (الاثنين إلى السبت).

محادثة واتساب مباشرة

تفضل الدردشة في الوقت الفعلي؟ راسلنا على واتساب للحصول على مساعدة فورية وإجابات سريعة.

  • احصل على عرض أسعار مخصص
  • مشاركة صور أو مستندات
  • ناقش احتياجاتك مباشرة
تحدث معنا على واتساب →

يresponder عادة خلال 5-30 دقيقة خلال ساعات العمل.

دعم: صور، فيديو، PDF