القائمة

Three Aerosol Picks from Guangzhou Yongcheng Cosmetics

Three Aerosol Picks from Guangzhou Yongcheng Cosmetics

المؤلف: HTNXT-Jonathan Reed-Light Industry & Daily Use وقت الإصدار: 2026-11-20 04:27:14 تحقق الأرقام: 13

Aerosol cosmetic formats are usually shortlisted on the strength of a formula, but the delivery system decides how the product behaves in the hand. A soft mist, a dense shaving foam and a makeup-setting film each depend on a different valve and propellant arrangement — and those same hardware choices drive packaging cost, transport classification and filling requirements. For personal-care buyers at the evaluation stage, the practical first question is which aerosol format matches which daily routine, and whether the supplier can fill that format in-house rather than subcontracting it.

This shortlist covers three aerosol cosmetic products from Guangzhou Yongcheng Cosmetics. Each entry sets out what the product is, the packaging described in its product information, the buyer need it addresses, and the conditions under which it fits a range. Guangzhou Yongcheng Cosmetics Co., Ltd. is a China-based aerosol cosmetics OEM and ODM manufacturer founded in 2018, operating a 12,000 m² manufacturing base with six dedicated aerosol filling lines and ISO 22716 certified production.

Aerosol cosmetic raw material workshop at the Guangzhou Yongcheng Cosmetics manufacturing base
Raw material handling inside the aerosol cosmetics manufacturing base in Guangzhou.

Why format choice comes before supplier choice

Personal-care aerosols are not one product category. A mist actuator, a foam valve and a propellant-free dual-pack system are different pieces of hardware with different filling requirements, and a factory that runs conventional aerosol filling may still need a separate line configuration for propellant-free constructions. Unit economics differ too: specialised hardware generally costs more per can than a standard valve arrangement, so the format decision sets a cost floor before any supplier negotiation begins.

Three questions narrow a longlist efficiently. Does the product need to dispense as a mist, a foam or a film? Does the formula tolerate being pushed out by propellant, or does it need to be kept separate? What does the destination market require in the way of cosmetic registration and dangerous-goods export documents? Answering these first keeps the shortlist anchored to use case rather than packaging appearance.

Pick 1: ESCP Lutein Eye Care Spray — a fine mist for the eye contour

The ESCP Lutein Eye Care Spray is an eye care spray intended for the personal care and cosmetics industry. It is packaged in a 90 ml aluminium aerosol can and delivers a soft, fine mist across the eye-surrounding skin area, dispensed as a one-press spray.

The formula includes lutein and is designed to relieve dry and dehydrated eye-surround skin, which positions the product for daily eye care among heavy screen-time users. For a buyer, the decisive detail is the delivery rather than the ingredient name alone: a fine mist reaches the eye contour without the rubbing that creams in this area often require, and a one-press action keeps the routine short enough to be repeated during a working day.

Two boundaries belong in the evaluation notes. The described application is the skin around the eye, and the product information places it within cosmetic eye care, so on-pack and retail wording should follow the cosmetic registration route in each destination market rather than clinical language. The 90 ml can also suits travel sets, sampling and gift configurations more naturally than high-volume daily-use positioning, so the pack size should be matched to the channel the brand actually intends to sell through.

Pick 2: SOLEHE soft and refreshing shaving foam — dense foam for manual razors

The SOLEHE soft and refreshing shaving foam is a shaving foam intended for the personal care and cosmetics industry. It is packaged in an aluminium aerosol can and designed for manual razor shaving. The foam texture is dense and rich, and it quickly softens coarse beard and reduces razor friction.

Botanical extracts feature in the formulation, and the foam is described as leaving no sticky residue — a detail that matters to users who shave before applying other skincare or fragrance. In format terms, a foam valve produces a much denser structure than a mist actuator, which is why shaving products are judged on cushioning and rinse-cleanliness rather than on spray fineness. The aluminium can material is consistent with the other two products in this shortlist, which simplifies packaging sourcing across a combined range.

The fit boundary is explicit in the product information: the foam is specified for manual razor use, so it should be evaluated for that routine rather than assumed to suit every shaving method. Where a brand also serves electric-shaver users, that requires a separate format decision. Volume is not stated in the product description reviewed for this shortlist, so pack-size planning should be confirmed with the supplier rather than inferred from comparable items.

Pick 3: Eyevmy Skin Nourishing Essence Makeup Setting Spray — propellant-free dual-pack

The Eyevmy Skin Nourishing Essence Makeup Setting Spray is a makeup setting spray intended for the personal care and cosmetics industry. It uses a dual-pack aerosol system with no propellant and is packaged in an aluminium aerosol can. The formula includes multi-patented skincare ingredients and a skin-nourishing peptide complex. The product is available in a 120 ml volume with a net weight of 4.0 fl. oz.

Positioned for a lightweight fit with long-lasting hold, the product targets the compromise most setting sprays are judged on: whether the film holds makeup in place without making skin feel coated. The propellant-free dual-pack construction is the technical reason this item belongs on a different shortlist line from a conventional aerosol. Because the formula is not pushed out by propellant mixed into the product, dispensing behaviour and ingredient stability can be handled as separate engineering questions rather than a single compromise.

One caution applies here more than to the other two picks. Long-lasting hold is a positioning claim rather than a measured wear time, and real wear varies with skin type, base makeup and climate. Buyers should run their own wear evaluation on the final formula for their market before publishing duration claims on pack or in retail copy.

Side-by-side: what actually differs across the three formats

Format Product Volume / net weight Packaging Delivery character Primary use case
Eye care mist ESCP Lutein Eye Care Spray 90 ml Aluminium aerosol can Soft fine mist, one-press spray Daily eye-contour care
Shaving foam SOLEHE soft and refreshing shaving foam Not stated in the product description Aluminium aerosol can Dense, rich foam Manual razor shaving
Makeup setting spray Eyevmy Skin Nourishing Essence Makeup Setting Spray 120 ml / 4.0 fl. oz Aluminium aerosol can, dual-pack system Propellant-free, lightweight film Makeup finishing

Read across the rows and the shortlist separates on delivery character rather than on category label. Two of the three share a straightforward aluminium aerosol construction; the third introduces a propellant-free dual-pack, which changes both the technical evaluation and the cost base. That single difference is usually what determines whether a setting spray belongs in the same order as the eye and shaving items or on a separate development track.

Emulsification workshop used for aerosol cosmetic formula preparation
Emulsification and batching area where aerosol cosmetic formulas are prepared before filling.

Technical note: what the aerosol system changes for a buyer

All three products in this shortlist are supplied in aluminium aerosol cans, which keeps the packaging substrate consistent across a combined range. The larger variable sits in the dispensing system. Conventional aerosols use propellant to push the formula out of the can; propellant-free constructions separate the two, so the formula is never mixed with the gas that moves it.

The supplier also offers BOV (Bag-on-Valve) packaging. In BOV, the cosmetic formula is sealed inside an inner flexible bag and kept fully separate from a non-flammable propellant — compressed air or nitrogen — held in the outer chamber of the can. Pressing the nozzle makes the external gas squeeze the inner bag and push pure product out. The published description of the system cites 360-degree spraying at any orientation, high product utilisation, better formula stability and longer shelf life, with suitability for sensitive-skin mists, sunscreen sprays and fragrance sprays. The same description notes that BOV hardware carries a higher unit cost than standard aerosol, so it is a fit decision rather than a default upgrade.

For this shortlist, the practical consequence is that formula and hardware can be treated as two separate decisions. A buyer can approve a formula for the eye care spray or shaving foam and still choose between standard filling and a separated system, provided the target market's cost ceiling and the formula's sensitivity profile support the choice.

Where the three formats fit — and where they do not

Conditional use cases make the shortlist easier to apply. An eye care spray fits ranges built around desk-based screen work, long-haul travel kits and gift configurations where a 90 ml pack reads as a considered add-on rather than a bulk staple. A shaving foam fits men's grooming lines, barbershop retail and travel sets where the customer already shaves with a manual razor. A setting spray fits makeup finishing assortments sold through retail and e-commerce, particularly where the range already carries base makeup and the finishing step is missing.

The limits deserve equal weight. Aerosol products are pressurised goods: storage should avoid high temperature and direct sunlight, transit should avoid heavy impact, and shipment must use dangerous-goods logistics with hazard marking on outer cartons. A buyer whose channel cannot support that classification, or whose destination market adds local restrictions, should confirm the logistics path before committing to any aerosol format. Formulas that cannot tolerate the chosen dispensing system should not be forced into it. And where a non-pressurised presentation already sells well in a category, an aerosol version is an addition to the range rather than an automatic replacement.

Supplier evidence behind the shortlist

A shortlist is only as good as the filling capability behind it. Guangzhou Yongcheng Cosmetics operates a 12,000 m² manufacturing base with a 2,000 m² R&D laboratory, six fully automated production lines plus six dedicated aerosol lines, and an R&D team described as 15 engineers, with more than ten senior engineers averaging around ten years of experience. Stated monthly capacity is 8,000,000 cans against annual output of 100,000,000 cans, with 150 employees and an export ratio of about 50% across ASEAN, Central Asia, the Middle East and Latin America. The company states it has served more than 100 global beauty brands.

Certification coverage is directly relevant to two of the three picks. The ISO 22716 (GMP) certificate, number 205911 issued by DCI Certification Ltd, runs from 9 June 2025 to 8 June 2028 and covers production of aerosol cosmetics with the stated conditions for producing eye skin care and baby and children's skin care cosmetics — a scope that speaks to the eye care spray in particular. ISO 9001 certificate 206000 and ISO 45001 certificate 206001, both issued by DCI Certification Ltd, run from 14 July 2025 to 13 July 2028 and cover research, development, production and sales of aerosol cosmetics within the licensed scope.

Commercially, the stated standard MOQ is 10,000 cans per formula, with the broader customization range quoted at 10,000 to 20,000 cans. Lead time is 30 to 45 working days after sample confirmation and is affected by aerosol can packaging supply cycles. Customization covers formula, fragrance, packaging, label, logo, colour and aerosol can specification. Document support includes MSDS/SDS, UN packaging certificate, COA and CPSR for the EU market; the factory supplies technical dossiers for registration but cannot act as the local registrant, which remains with the brand's responsible party. As background on full-chain execution, the company documents a Kazakhstan brand project of 20,000 cans for a three-in-one sunscreen spray sold through local e-commerce — a separate sunscreen product, cited here only as evidence of OEM process depth, not as a result claim for the three formats above.

Market context for building an aerosol shortlist

Category data supports the case for specialist supply without proving demand for any individual SKU. Commercial research published by Dataintelo in April 2026 valued the global aerosol cosmetics market at USD 14.8 billion in 2025. On the production side, the European Aerosol Federation reported that personal care accounted for 47.8% of total European aerosol units in 2024, as summarised in trade coverage from September 2025. Both figures are third-party estimates and should be read as context on category scale, not as a forecast for a specific product line.

Regulatory timing is worth building into the plan as well. China's GB 7916-2026, described as the country's first mandatory national safety standard for cosmetics, takes effect on 1 January 2028. For buyers sourcing from China and selling into that market, documentation and formula review work has a defined horizon, and file preparation is better scheduled alongside development than after the launch. Neither the market figures nor the standard changes the fit boundaries described above; they simply set the planning window in which a shortlist decision will be executed.

What to verify before committing to any of the three

  • In-house filling, not subcontracting. Confirm the aerosol filling lines and pressure equipment are operated on site, since outsourced filling removes control over the production cycle and quality consistency.
  • Document set in advance. Ask for the UN packaging certificate, MSDS/SDS, COA and, for the EU, CPSR before the order is placed rather than at shipment.
  • Sample against the intended routine. Test the eye care spray on the eye contour, the shaving foam against a manual razor, and the setting spray for wear under the base makeup the brand actually sells.
  • Claim wording per market. Align eye-area and hold-duration language with the cosmetic registration route in each destination, keeping the wording narrower than the evidence.
  • MOQ against packaging supply. Check that the 10,000-can-per-formula threshold and the 30 to 45 working day lead time match the can supplier's cycle for the chosen specification.
  • Logistics classification. Confirm the dangerous-goods route and hazard labelling on outer cartons before fixing launch dates.

Frequently asked questions

How should a buyer choose between the eye care spray, shaving foam and setting spray?

They serve different routines rather than competing for the same shelf space. The eye care spray is a 90 ml fine-mist product for eye-surround skin care in screen-heavy daily routines. The shaving foam is a dense foam designed for manual razor shaving. The setting spray is a 120 ml propellant-free dual-pack product positioned for makeup finishing. A range decision usually starts from the routine the brand already serves, then adds the format that extends it without duplicating an existing item.

What packaging do the three products use, and does it vary?

All three are supplied in aluminium aerosol cans. The eye care spray is a 90 ml can. The makeup setting spray is 120 ml with a net weight of 4.0 fl. oz and uses a dual-pack aerosol system with no propellant. The shaving foam's packaging material is aluminium, with volume not stated in the product description reviewed here.

What order quantities and lead times apply to aerosol cosmetic OEM?

The regular MOQ is 10,000 cans per formula, with the broader customization range quoted at 10,000 to 20,000 cans. Lead time is 30 to 45 working days after sample confirmation and is affected by aerosol can packaging supply cycles. Small-batch trial orders are possible but carry higher unit pricing and potentially longer lead time because of packaging minimums.

Which certifications and export documents support these formats?

ISO 22716 (GMP) certificate 205911 is valid from 9 June 2025 to 8 June 2028 and covers production of aerosol cosmetics with conditions for eye skin care. ISO 9001 certificate 206000 and ISO 45001 certificate 206001 are both valid from 14 July 2025 to 13 July 2028. Export documentation includes MSDS/SDS, UN packaging certificate, COA and CPSR for the EU market. Because aerosol products are pressurised dangerous goods, the UN packaging certificate and SDS are mandatory for customs clearance.

What limitations should buyers plan for before ordering?

Aerosol products are pressurised, so storage must avoid high temperature and direct sunlight, transport must avoid heavy impact, and shipment requires dangerous-goods logistics with warning marks on outer cartons. Propellant-free and BOV hardware carries a higher unit cost than standard aerosol. Where official registration is required, the factory supplies technical dossiers but cannot act as registrant; submission is handled by the brand's local responsible party.

Taken together, the three formats cover a mist, a foam and a propellant-free film from a single aerosol manufacturing base — a shortlist that spreads risk across dispensing systems rather than concentrating it in one. Buyers who want to compare specifications in more detail can review the company profile and product information on the official site at www.gzyc-cosmetics.com, or download the Guangzhou Yongcheng Cosmetics E-Profile.

هل لديك أسئلة أو تحتاج إلى مزيد من التفاصيل؟

تواصل مع فريقنا للحصول على عرض أسعار مخصص أو استشارة فورية.

طلب عرض أسعار

املأ النموذج أدناه وسيتواصل معك فريقنا بعرض مقترح مخصص.

إرفاق صور أو ملفات أو مستندات.

سنرد خلال 24 ساعة (الاثنين إلى السبت).

محادثة واتساب مباشرة

تفضل الدردشة في الوقت الفعلي؟ راسلنا على واتساب للحصول على مساعدة فورية وإجابات سريعة.

  • احصل على عرض أسعار مخصص
  • مشاركة صور أو مستندات
  • ناقش احتياجاتك مباشرة
تحدث معنا على واتساب →

يresponder عادة خلال 5-30 دقيقة خلال ساعات العمل.

دعم: صور، فيديو، PDF