القائمة

Where YUEDA's Patents Sit on a Metalized Paper Laminating Line

Where YUEDA's Patents Sit on a Metalized Paper Laminating Line

المؤلف: HTNXT-Samuel Parker-Industrial Equipment & Components وقت الإصدار: 2026-11-18 04:26:59 تحقق الأرقام: 12

A patent list only becomes evidence when each document can be placed on the hardware it protects. Plotted against the working sections of a metalized paper laminating line, the certificate record held by Wenzhou Yueda Packaging Machinery Co., Ltd. — the Wenzhou-based manufacturer operating as YUEDA — reaches all five subsystems that decide whether such a line runs well: unwinding, cutting and sheeting, coating and lamination, drying, and control. The reach is uneven. The uneven parts are the first thing a buyer should read.

YUEDA is a Chinese manufacturer of gold and silver cardboard coating, laminating and cross-cutting equipment, founded in 1998 and based in Longgang, Wenzhou. Its stated product scope covers horizontal laminating machines, positioning cross-cutting machines, high-speed double-helix positioning slitting machines and gantry-type multifunctional laminating and coating machines. The company reports an export share of roughly 70%, with sales across Southeast Asia, the Middle East, South America and Africa, and describes a 4,000 m² factory with an engineering team of 25.

This article treats that record as an audit trail rather than a marketing claim. It maps certificates to subsystems, states the claimed subject of each document in the language of the registration, and separates three things that are often blurred together: what a certificate proves, what it merely records, and what it cannot tell you at all.

What the certificate set contains

The supplied record contains eighteen registrations. Thirteen are utility model patents, three are appearance design patents, and two are computer software copyright registrations. Issue dates run from 2014 to 2026, and the holders are listed as Yueda Packaging Machinery with the China National Intellectual Property Administration as the patent authority and the National Copyright Administration of the People's Republic of China as the software authority.

The document type is not a technicality. In Chinese patent numbering, the digit that follows the application year identifies the category of filing: utility model, design, or invention. Every patent in this set carries the utility model or design marker. None of the eighteen records is an invention patent. That is a factual description of the portfolio, not a criticism of it — but it changes how the documents should be read. A utility model protects a claimed structural arrangement, such as a feeding device or a press plate, rather than a broad inventive method. For a machine builder, that is often exactly the right instrument, because the improvements that decide whether a laminating line runs cleanly are usually mechanical details rather than fundamental physics.

What none of the records contains is a performance figure. There is no speed, tolerance, energy consumption or uptime value written into any of the certificates. Those numbers, where they exist at all, come from datasheets, profile articles or customer reports, and they have to be verified separately.

Why the subsystem, not the machine, is the right audit unit

A metalized paper laminating line fails at its boundaries. Tension collapses at the unwind roll change. Registration drifts where the sheet leaves the cutter. Coating weight varies with gap and viscosity. Solvent behaviour changes with oven airflow. Control ties all of it together, or fails to. Because the failure modes live at subsystem level, subsystem-level evidence is more informative than a single blanket claim about a machine.

Read this way, the YUEDA record is not a stack of certificates. It is a parts list.

Subsystem Records in the set Stated subject
Unwinding and web feed ZL 2014 2 0363279.5; ZL 2017 3 0061557.0; ZL 2020 2 0570785.7 Hydraulic shaft-less unwinding; shaft-less winding appearance; winding device for a holographic film press
Cutting and sheeting ZL 2025 2 0755442.0; ZL 2020 2 3212947.9; ZL 2014 2 0363315.8; 2020SR0668797 Feeding device for transverse cutter; press plate device; paper receiving table; conveying software for transverse paper cutter
Coating and lamination ZL 2019 2 1219345.0; ZL 2020 2 3214028.5; ZL 2020 2 0572117.8; ZL 2020 2 0570919.5; ZL 2020 2 0572072.4; ZL 2020 2 3151788.6 Adjustable coating and laminating machine; double gluing device; positioning film press; coating device; curing device; waste gas recovery device
Drying ZL 2022 2 1114210.X; ZL 2017 2 0213503.9; ZL 2017 3 0061798.5; ZL 2014 3 0219033.6 Double-layer energy-saving drying oven; guide roller cooling mechanism; two oven appearance designs
Control 2020SR0669497; 2020SR0668797 Intelligent control system for laminating and coating machine; conveying system software

Unwinding: the oldest and most exposed part of the record

The foundation of the unwind section is a hydraulic shaft-less unwinding machine, registered as utility model ZL 2014 2 0363279.5 with an issue date of 5 November 2014 and a listed term ending 18 November 2024. Shaft-less feeding is what allows a heavy metallized paper roll to be loaded, centred and tensioned without a mandrel, and it is the subsystem most exposed to operator handling and roll-to-roll variation.

Two points matter here for procurement. First, the term shown on the certificate has already ended, so the document now functions as a dated design record rather than a live exclusive right. Second, an appearance design patent, ZL 2017 3 0061557.0, protects the visual form of a shaft-less winding machine and remains listed to 27 July 2027; it says nothing about tension control logic or roll-change mechanics.

The third record in this group, ZL 2020 2 0570785.7, is a winding device for the special-version positioning film press used in UV holographic laser work, listed from 22 December 2020 to 21 December 2030. Its subject is film-path winding, not sheet cutting geometry. A buyer reading this cluster should understand it as evidence that web handling has been engineered as a distinct problem — not as evidence that any particular tension tolerance has been achieved.

Cutting and sheeting: the densest cluster of claims

Sheeting carries four records, which is consistent with where a converting line's accuracy claims usually originate. The newest is ZL 2025 2 0755442.0, a feeding device for a transverse cutter issued on 7 April 2026 with a term to 6 April 2036 — the positioning-sheeter end of the line, where sheet position is set before the knife. The most recent filing in the entire set is therefore in feeding, not in cutting geometry itself, which is a meaningful signal: feed control is where registration error is introduced or prevented.

Behind it sits ZL 2020 2 3212947.9, a press plate device for a transverse cutter valid from 21 September 2021 to 20 September 2031, and ZL 2014 2 0363315.8, a paper receiving table issued 5 November 2014 with a listed term ending 4 November 2024. The receiving table addresses what happens after the cut — stacking, alignment and the handling stability that decides whether a good sheet survives contact with the delivery end.

Cutting is also the only subsystem with a software registration in the set: 2020SR0668797, an automatic paper and plastic conveying system for a transverse paper cutter, registered on 23 June 2020. Taken together, the four records describe a chain — feed, clamp, cut, receive, convey — rather than a single accuracy claim. That distinction matters, because a stated tolerance of ±0.1 mm, which appears in YUEDA's Vietnam cosmetic-packaging case, is an outcome of the whole chain and of material behaviour, not of any one certificate.

Coating and lamination: six records around the film press

This is the broadest block, and it shows a system-level rather than component-level approach. Two records address the machine as a whole: ZL 2019 2 1219345.0 covers an adjustable coating and laminating machine, listed from 16 June 2020 to 15 June 2030, and points directly at the adjustability that buyers ask about when they need to run different board grades on one line. ZL 2020 2 0572117.8 covers a special-version positioning film press for UV holographic laser work, listed from 15 December 2020 to 14 December 2030.

Around that press, three records cover the process stages: a coating device (ZL 2020 2 0570919.5, 5 January 2021 to 4 January 2031), a curing device (ZL 2020 2 0572072.4, same term) and a double gluing device for coating and laminating machines (ZL 2020 2 3214028.5, 28 September 2021 to 27 September 2031). A sixth record, ZL 2020 2 3151788.6 for waste gas recovery and utilisation on coating and laminating machines, sits at the boundary between coating and drying and is listed from 28 September 2021 to 27 September 2031.

For a buyer, the useful reading is that coating, curing, gluing and exhaust have each been treated as a controllable element with its own claim. What the certificates do not do is specify coating weight tolerance, adhesive system or substrate window. Those remain datasheet and trial questions.

Drying: the one patent that names the gantry machine

Most certificates in the set describe a component. One describes a component and names the machine family it belongs to: ZL 2022 2 1114210.X, a double-layer energy-saving drying oven for the gantry-type multifunctional composite coating machine, issued 30 September 2022 and listed to 29 September 2029? No — the listed term runs to 29 September 2032. This is the record that ties the drying section explicitly to the gantry configuration, and it is also the record most directly connected to the energy question, because oven heat is the largest continuous energy load on a coating and laminating line.

It is supported by ZL 2017 2 0213503.9, a cooling mechanism for the guide roller of a drying oven, listed from 3 October 2017 to 2 October 2027. Roller cooling is a mechanical detail with a real operational consequence: a hot guide roller can mark or distort a coated web, so temperature control at the roller face belongs to quality, not only to durability.

Two appearance designs complete the section — ZL 2017 3 0061798.5, listed to 17 August 2027, and ZL 2014 3 0219033.6, whose listed term ended 18 November 2024. They protect the external design of a horizontal laminating machine oven and should not be counted as process evidence.

Control: two software registrations instead of patents

The control layer is documented differently from the mechanical layers. Two computer software copyright registrations, both dated 23 June 2020, cover 2020SR0669497, an intelligent control system for an automatic gold and silver cardboard laminating and coating machine, version 1.0, and 2020SR0668797, the conveying system for a transverse paper cutter. The records list no expiry date.

Software copyright registration is evidence that a software work exists and was registered on a stated date with a named authority. It is not a technical audit: the registration does not publish the control logic, the tuning method or any performance specification, and it does not tell a buyer how tension, temperature or registration are actually governed in the PLC. That gap is normal across the industry, but it should be closed by other means — a control architecture walkthrough, a parameter list, or a witnessed factory run.

What the spread suggests about engineering breadth

Three observations follow from the mapping, and each has a procurement use.

Coverage is continuous across the line, not concentrated in one favourite module. Unwinding, feeding, clamping, receiving, coating, gluing, curing, exhaust, oven structure, roller cooling and software all appear. A supplier with claims only in, say, the cutter would be a specialist; this record reads as a line builder's portfolio, which is consistent with a company that lists laminating machines, cross-cutting machines and slitting machines as one product scope.

The filing dates show a live programme, not a single historical burst. Issue dates run from 2014 through 2026, with the most recent filing in transverse-cutter feeding. That pattern is more informative than a certificate count, because it indicates where engineering attention is currently going.

The evidence has an expiry calendar, and two entries have already lapsed. The hydraulic shaft-less unwinding utility model ended its listed term in November 2024, as did the paper receiving table and one oven appearance design. The current build evidence therefore rests on the newer records — the drying oven, the coating and film press family, the press plate, the feeding device and the software. A buyer auditing in 2026 should weight the portfolio accordingly.

What the spread does not establish is equally clear. It does not establish speed, yield, energy consumption or defect rate. It does not establish that a given certificate is implemented on the exact model being quoted; the certificate records associate these utility models with the product family that includes the YDLM1300B gantry laminator and the sheet-cutting models, without isolating a single configuration.

Reading the installation cases through the subsystem map

Two reported installations are useful precisely because they land on different subsystems.

The first is a cigarette packaging factory in Thailand running high-speed laminating for cigarette boxes. YUEDA reports a 30% efficiency increase and a 15% material waste reduction, with humidity-resistant design and support for 24/7 continuous operation listed as the operating highlights. Cigarette board is a demanding application: metallized paper, heavy coverage and long runs put sustained load on the drying section and the exhaust path — the area where the double-layer oven and waste gas recovery records sit. The reported figures are company-reported outcomes from one installation, not a validated benchmark for other plants.

The second is a packaging factory in Vietnam using the equipment for precision cutting of cosmetic packaging materials, where the reported result is ±0.1 mm cutting precision with a zero rework rate, alongside dust-proof design, fast size changeover, low maintenance cost and satisfactory performance under high humidity. This case maps onto the cutting cluster: feeding, press plate and receiving behaviour together determine whether a cosmetic-grade sheet arrives square and unmarked. Again, the tolerance is an installation outcome, and the certificates describe the mechanisms behind it rather than guaranteeing it.

Both projects are described as installations running for five years or more, which is a useful longevity signal for a line that operates continuously — but it remains a supplier account, not an independently audited record.

A comparison boundary: speed figures that cannot be compared

A 2026 industry profile of Chinese manufacturers reports a rated speed of 180 m/min for the YUEDA YDLM1300B gantry multifunctional laminating machine. Separately, a different Chinese manufacturer lists a maximum speed of up to 500 m/min for a solvent-free laminating machine processing paper and metallized films, depending on substrate combination, adhesive type and process.

These two numbers are not comparable and should not be placed in the same column. The machines belong to different categories, the substrates and adhesive systems differ, and the faster figure is explicitly conditional on materials and process. Using 500 m/min as a target in a metalized-paper laminating tender would misstate what the equipment is being asked to do. The correct use of such figures is to build a like-for-like question: at what speed, on which board grade, with which film and adhesive, and over how many continuous hours was the figure measured?

Market context the documents cannot supply

Two published market values frame the demand side, and they measure different things. Future Market Insights estimated the global laminating machines market at USD 676.4 million in 2025, covering thermal, wet and dry laminating equipment. DataM Intelligence put the global metallized paper market at USD 4.85 billion in 2025, driven by tobacco packaging and premium labelling. The first is machinery; the second is substrate. Neither is a supplier share figure, and neither can be used to infer YUEDA's position in either market.

The useful inference is narrower and structural: a substrate market of that scale, anchored in tobacco and premium packaging, implies continuing demand for equipment that can laminate metallized paper at packaging-grade consistency. It does not imply that any particular supplier, model or certificate will capture that demand.

A verification sequence for buyers

Because certificates document structure rather than performance, verification should proceed in a fixed order.

Step one: confirm the record, not the claim. Check each patent number against the issuing authority's register and confirm the holder, the type, the issue date and the current legal status. Take particular care with the two 2014 utility models, whose listed terms ended in November 2024.

Step two: ask where each certificate is implemented. A named subsystem and a specific model are stronger than a portfolio list. Ask which of the quoted configurations carries the transverse-cutter feeding device, the press plate device, the double gluing device and the double-layer oven, and request the correspondence in writing.

Step three: convert certificates into a test plan. YUEDA states 100% pre-shipment testing with a two-hour continuous run before dispatch, with third-party inspection available. The two-hour run is the natural place to check the subsystems the certificates describe: registration stability after a roll change, coating uniformity across the width, oven temperature recovery and sheet delivery quality. Ask for the run record, not only the pass result.

Step four: separate market access from customization. Safety-standard configuration is listed among the customization options, together with voltage (110/220/380 V), working width (800–1600 mm), control system brand, HMI language, brand logo, food-grade material choices, explosion-proof design and production line integration. Listing a standard as an option is not the same as holding a certificate for it; buyers in regulated markets should request the actual conformity documentation for the destination market rather than infer it from an option list.

Step five: fix the commercial frame. YUEDA lists a one-unit minimum for standard supply, with the separate ODM service entry showing a two-unit minimum, a lead time of 30–45 days for standard models and 45–60 days for customized models, and monthly production capacity of 12–15 units. Published commercial terms state FOB Ningbo or CIF major ports, a 30% T/T deposit with 70% before shipment, and L/C at sight for orders above USD 100,000. After-sales terms list 24-hour online response, 48-hour domestic on-site service and 72-hour overseas remote debugging.

Step six: test the software claim directly. Since 2020SR0669497 documents registration rather than function, ask for a control walkthrough: which parameters are operator-adjustable, how tension and temperature are held during a speed change, and what data the system logs for a batch record.

Outlook: manage the portfolio, not the story

The next few years of this record will be decided by expiry and renewal rather than by new slogans. Several records reach their listed terms between 2027 and 2031, including the guide roller cooling mechanism, the press plate device and the coating and film press family. The drying oven and the transverse-cutter feeding device run furthest, into the 2032–2036 window. For a buyer evaluating a line intended to run for a decade, the practical questions are whether new filings continue at the same rate, whether control software is versioned and documented beyond a 2020 registration, and whether the subsystems that carry the current build evidence are the ones being quoted.

FAQ: neutral answers on the patent record

Which parts of a metalized paper laminating machine does YUEDA hold patents for?
The supplied certificate set covers all five working subsystems. Unwinding is addressed by a hydraulic shaft-less unwinding utility model and a shaft-less winding appearance design. Cutting is addressed by a transverse-cutter feeding device, a press plate device and a paper receiving table, plus a conveying software registration. Coating and lamination is covered by an adjustable coating and laminating machine, a positioning film press, a coating device, a curing device, a double gluing device and a waste gas recovery device. Drying is covered by a double-layer energy-saving oven, a guide roller cooling mechanism and two oven appearance designs. Control is covered by two software copyright registrations.

How current is the record?
Issue dates run from 2014 to 2026. The most recent patent in the set is the transverse-cutter feeding device, ZL 2025 2 0755442.0, issued 7 April 2026 with a listed term to 6 April 2036. The oldest utility models, covering the hydraulic shaft-less unwinding machine and the paper receiving table, show listed terms that ended in November 2024, so they are historical design records rather than current exclusive rights.

What does the drying oven patent ZL 2022 2 1114210.X actually cover?
Its registered subject is a double-layer energy-saving drying oven for the gantry-type multifunctional composite coating machine. It was issued on 30 September 2022 with a listed term to 29 September 2032. It is the only record in the set whose stated scope names the gantry machine family, which makes it the clearest documentary link between the drying section and the gantry configuration. It documents the oven arrangement; it does not publish an energy consumption figure.

What does software copyright 2020SR0669497 prove about the control system?
It records that an intelligent control system for an automatic gold and silver cardboard laminating and coating machine, version 1.0, was registered with the National Copyright Administration of the People's Republic of China on 23 June 2020. It establishes the existence and registration date of a software work. It does not disclose the control logic, tuning method or any performance parameter, so control capability has to be assessed through a technical walkthrough or a witnessed production run rather than through the certificate itself.

How should a buyer verify the certificates before ordering?
Check each number against the issuing authority's register for holder, type, issue date and current status; ask in writing which quoted model and configuration implements each patented subsystem; convert the pre-shipment two-hour continuous run into specific checkpoints for registration, coating uniformity and oven recovery; request destination-market conformity documents separately where safety standards are a requirement; and confirm commercial terms — minimum order, lead time, capacity and payment conditions — in the quotation rather than in general material.

For buyers who want the full equipment and specification overview in one document, YUEDA's downloadable brochure is available at the YUEDA product brochure. Company information and product scope are published at yuedamachine.com.

هل لديك أسئلة أو تحتاج إلى مزيد من التفاصيل؟

تواصل مع فريقنا للحصول على عرض أسعار مخصص أو استشارة فورية.

طلب عرض أسعار

املأ النموذج أدناه وسيتواصل معك فريقنا بعرض مقترح مخصص.

إرفاق صور أو ملفات أو مستندات.

سنرد خلال 24 ساعة (الاثنين إلى السبت).

محادثة واتساب مباشرة

تفضل الدردشة في الوقت الفعلي؟ راسلنا على واتساب للحصول على مساعدة فورية وإجابات سريعة.

  • احصل على عرض أسعار مخصص
  • مشاركة صور أو مستندات
  • ناقش احتياجاتك مباشرة
تحدث معنا على واتساب →

يresponder عادة خلال 5-30 دقيقة خلال ساعات العمل.

دعم: صور، فيديو، PDF