{{ variable.name }}
A fine-mesh 310 g/m² glass fiber fabric woven from G75 1/4 yarns for thin plaster anti-crack, wall reinforcement, road patching and industrial filtration.
Model 1×1 is a fine-mesh fiberglass woven fabric built with G75 1/4 glass yarn in both warp and weft. It is woven at 5.5 warp and 5.4 weft threads per centimetre to a 310 g/m² weight and 0.41 mm thickness, giving a dense, dimensionally stable mesh that bonds well with cement mortar. The construction suits thin plaster anti-crack layers, external wall insulation systems, gypsum board reinforcement, interior renovation, waterproofing projects, road patching, tunnels, composite reinforcement and outdoor wall facades. The same fabric is also used as a filtration medium and as a protective covering sheet in industrial and outdoor operations.
| Parameter | Value |
|---|---|
| Material | Fiberglass |
| Model | 1×1 |
| Warp yarn | G75 1/4 |
| Weft yarn | G75 1/4 |
| Weight | 310 g/m² |
| Thickness | 0.41 mm |
| Warp density | 5.5 fil./cm |
| Weft density | 5.4 fil./cm |
| Alkali resistance | Yes |
| Certification scope | ISO 9001 / ISO 14001 / ISO 45001 (valid to 29 Apr 2028) |
This page documents model 1×1 with G75 1/4 warp and weft yarns, 310 g/m² weight and 0.41 mm thickness. For a different yarn count, weight or roll format, share your target specification with our technical team; our 30-engineer R&D group and in-house weaving equipment are used to confirm feasibility before quotation.
Both yarn systems are G75 1/4 glass yarn, interlaced in a 1×1 plain woven construction at 5.5 warp and 5.4 weft threads per centimetre. The resulting 0.41 mm fabric weighs 310 g/m² and is described by the manufacturer as alkali resistant with good adhesion to cement mortar. Production runs on KARL MAYER sizing and combining machines, parallel-beam and slitting warping machines, DORNIER and Toyota air-jet looms and DORNIER rapier looms at the company’s 110,000 m² facility in Haining, Zhejiang.
Installed as a static reinforcement layer in plaster before finishing; external wall insulation, wall plaster anti-crack, interior renovation, gypsum board reinforcement, outdoor wall facade.
Laid as a continuous layer under road base or around drainage; road patching, tunnel and waterproofing projects.
Used on filter press plates under pressure filtration cycles in chemical and mining processes; fixed with ropes or straps over trucks, tents or storage areas for cargo and weather shielding.
Serves as a reinforcement layer in composite laminate production and other industrial textile processing.
Orders are supplied in customized quantity per order. The company runs a 30-engineer R&D centre and in-house sizing, warping and weaving lines for fiberglass, aramid and other high-performance yarns, so specification questions can be reviewed against actual production capability. Share your application, target weight or yarn count, and roll or packing requirement with the sales contact below.
A composite material manufacturer project, supplied to buyers in KR, CN, JP, TR, DE, US, CA and IN, used this fabric for reinforcement of walls, plaster and road base, solid-liquid filtration in chemical and mining processes, fireproof covering in welding and high-temperature work, and cargo protection with weather shielding. Reported outcomes include no cracking, enhanced strength, reduced maintenance, stable filtration, less downtime, lower replacement cost, zero fire incidents with the blanket intact after heat exposure, and protected goods.
ISO 9001 Quality Management System (05325Q30237R1M), ISO 14001 Environmental Management System (05325E30191R1M) and ISO 45001 Occupational Health and Safety (05325S30180R1M), all issued 30 Apr 2025 by Beijing NGV Certification Center Co., Ltd. and valid to 29 Apr 2028. The certified scope covers the design and production of fiberglass woven fabric and polyester woven fabric.
What are the exact specifications of model 1×1?
Warp G75 1/4, weft G75 1/4, 310 g/m², 0.41 mm thick, warp density 5.5 fil./cm and weft density 5.4 fil./cm.
Is the fabric suitable for cement-based plaster?
Yes. The product data specifies alkali resistance and good adhesion with cement mortar, which is why it is used in plaster anti-crack and external wall insulation work.
How is it installed on a wall?
It is installed as a static reinforcement layer in plaster before finishing. In civil works it is laid as a continuous layer under road base or around drainage, and for covering duties it is fixed with ropes or straps.
Can it be used for filtration?
Yes. Project records include installation on filter press plates operating under pressure filtration cycles in chemical and mining environments.
What certificates can be provided?
ISO 9001, ISO 14001 and ISO 45001 certificates, numbers 05325Q30237R1M, 05325E30191R1M and 05325S30180R1M, valid to 29 Apr 2028.
What is the order quantity?
Quantity is customized per order. Send your requirement and our team will confirm the production plan.
Contact: Jonan · Email: jonan.xie@vip.163.com
Tel: +86 138-0672-5139 · WhatsApp: +86 182-6836-8006
Zhejiang Hongyan New Material Co., Ltd · No. 18, Jingbian 8th Road, Warp Knitting Industrial Zone, Haining, Zhejiang, China