{{ variable.name }}
Vertical Machine | Waste Paper Baler
10 ton hydraulic power at 10 MPa | 600 x 400 x (350-600) mm bales | 6-8 bales per hour | 220V / 50Hz
SEO Title: 10 Ton Hydraulic Vertical Baler NK6040T10 for Waste Paper Bales
Meta Description: The NK6040T10 10 ton vertical hydraulic baler presses loose waste paper into 50-80 kg bales at 6-8 bales per hour, driven by a 220V/50Hz 2.2 kW motor.
URL Slug: /vertical-baler-nk6040t10-waste-paper
NK6040T10 vertical hydraulic baler - vertical chamber and hydraulic press unit (vertical-baler-nk6040t10-machine-front.jpg)
The NK6040T10 is a vertical hydraulic baler built for waste paper recycling points, warehouse back rooms and small processing workshops that need to reduce the volume of loose paper before storage or transport. A 10 ton hydraulic cylinder working at 10 MPa presses material inside a vertical chamber with a 540 x 450 mm feed opening. Finished bales measure 600 x 400 mm with a height that can be set between 350 mm and 600 mm, and each bale weighs 50-80 kg. Rated capacity is 6-8 bales per hour from a 2.2 kW / 3 HP motor on a 220V / 50Hz supply. The complete machine measures 870 x 780 x 2150 mm, weighs 600 kg and is built on a carbon steel frame. Compressing loose waste into bales helps reduce space requirements and the frequency of waste transport.
A 10 ton hydraulic cylinder running at 10 MPa working pressure compacts loose waste into a tied bale, so material is handled once instead of being shovelled and re-loaded.
The 600 x 400 mm chamber produces bales of 50-80 kg, and the height setting lets you match bale weight to how bales are stacked, palletised or loaded.
The rated output of 6-8 bales per hour is the figure to use when planning one operator position and the number of collection trips per shift.
A 540 x 450 mm opening accepts loose paper and light recyclables by hand or from a conveyor, keeping the loading step simple.
The whole unit stands 2150 mm high and weighs 600 kg, so it can be placed at an existing waste point rather than in a dedicated baling room.
Carbon steel construction, with EU verification of conformity No. DPWD/09/060/2024 to EN ISO 12100:2010, EN 60204-1:2018 and EN 415-1:2014 on file.
| Model | NK6040T10 |
|---|---|
| Machine type | Vertical machine - waste paper baler |
| Hydraulic power | 10 ton |
| Working pressure | 10 MPa |
| Bale size (L x W x H) | 600 x 400 x (350-600) mm |
| Feed opening (L x H) | 540 x 450 mm |
| Capacity | 6-8 bales per hour |
| Bale weight | 50-80 kg |
| Voltage | 220V / 50Hz |
| Power | 2.2 kW / 3 HP |
| Machine size (L x W x H) | 870 x 780 x 2150 mm |
| Weight | 600 kg |
| Main material | Carbon steel |
| Bale tying consumables | Baling wire or PET strapping |
| Working environment | Indoor recycling workshop, -10 C to 45 C, normal humidity, light dust, stable power supply |
| Conformity documentation | EU verification of conformity No. DPWD/09/060/2024 (EN ISO 12100:2010; EN 60204-1:2018; EN 415-1:2014), valid 19 Sep 2024 - 18 Sep 2029; Machinery Directive attestation No. EASY03220201M (EN ISO 12100:2010; EN 60204-1:2018), valid 22 Mar 2022 - 21 Mar 2027 |
The base configuration is the NK6040T10 vertical baler with 10 ton hydraulic power and a 220V / 50Hz, 2.2 kW motor. Recorded options and matched equipment for this baler range include bale height within the 350-600 mm range, baling wire or PET strapping as the tying consumable, and auxiliary items such as conveyors, jumbo bags, packing tools, shredders and crushers for a complete recycling line. For customized baling or complete-line projects, the configuration is confirmed after the customer supplies material type, material dimensions, loose density, target bale weight or size, available floor space, power conditions, automation level and required throughput.
The frame and pressing chamber are built in carbon steel. Material is loaded through the 540 x 450 mm feed opening at the top of the vertical chamber, the 10 ton hydraulic cylinder compresses it at 10 MPa working pressure, and the finished 600 x 400 mm bale is secured with wire or PET strapping before release. The 2.2 kW / 3 HP motor and hydraulic assembly are carried on the same 870 x 780 mm base, with an overall height of 2150 mm and a total machine weight of 600 kg.
Feed opening and chamber area of the NK6040T10 vertical baler (vertical-baler-nk6040t10-chamber-detail.jpg)
This baler is applied in waste paper, plastics, scrap metal, textiles, agricultural straw and mixed solid-waste recycling, as well as in food, pharmaceuticals, packaging, chemicals, electronics, metals, waste treatment and recycling plants. Typical projects are recycling-facility upgrades, new recycling plants, small processing workshops, warehouse and industrial waste management, and customized baling equipment or complete-line projects.
Model and solution confirmation starts from your material data: material type, dimensions, loose density, target bale weight or size, available space, power conditions, automation level and required throughput. Bale height setting, tying consumable and the auxiliary equipment around the baler (conveyor, shredder, packing tools) are then matched to that data. Baling wires, PET strapping, jumbo bags and packing tools are listed as matched equipment, and customized baling equipment or complete-line projects are handled case by case.
Bales are 600 x 400 mm with an adjustable height between 350 mm and 600 mm; each bale weighs 50-80 kg at a rated 6-8 bales per hour.
The pressing cylinder is rated at 10 ton hydraulic power and operates at 10 MPa working pressure.
The machine is specified for 220V / 50Hz with a 2.2 kW / 3 HP motor. Please confirm your site supply when ordering.
The machine base is 870 x 780 mm, overall height is 2150 mm and total weight is 600 kg.
Baling wire or PET strapping, both listed as matched equipment for this baler range. The wire or strap format is confirmed with the order.
Stated applications cover waste paper, plastics, scrap metal, textiles, agricultural straw and mixed solid waste. Because loose density and piece size differ by site, final suitability is confirmed from your material type, dimensions and target bale weight.
Yes. EU verification of conformity No. DPWD/09/060/2024 covers EN ISO 12100:2010, EN 60204-1:2018 and EN 415-1:2014, valid to 18 Sep 2029; Machinery Directive attestation No. EASY03220201M covers EN ISO 12100:2010 and EN 60204-1:2018, valid to 21 Mar 2027.
Material type, material dimensions, loose density, target bale weight or size, available space, power conditions, automation level and required throughput.
Shaanxi Nick Machinery Equipment Co., Ltd (NickBaler), founded 2013, 5,000 m2 facility, www.nkbaler.com.
Contact: Nick | Email: Sales@nkbaler.com | Tel / WhatsApp: +86 15021631102
Address: Qun Sheng Lu, Hui Shan Qu, WuXi Shi, Jiang Su Sheng, China
Send your material type, dimensions, loose density, target bale weight, available space and power supply so the NK6040T10 configuration can be confirmed.