{{ variable.name }}
The NK080T100 is quoted as the compaction step in food, pharmaceutical, packaging and chemical plants, pressing production and packaging waste into 200-350 kg bales at 3-6 bales per hour.

Inside a manufacturing plant, packaging and production waste builds up faster than it is removed. This configuration of the NK080T100 is specified as part of a material compression and packaging project: cans, bottles, plastic packaging and similar production scrap are loaded through a 1000 x 500 mm feed opening into a 1000 x 800 x 1500 mm chamber, where a 100-ton hydraulic press forms bales of 1000 x 800 x 500-1000 mm weighing 200-350 kg. Rated output is 3-6 bales per hour from a 15 kW / 20 HP motor on 380 V / 50 Hz. The machine stands 1700 x 1400 x 3300 mm and weighs 3.2 T, fitting an indoor plant bay served by a stable three-phase supply.
The result is compacting and packaging in one step: waste leaves the production area as tied, stackable bales rather than loose material occupying floor space.


| Parameter | Value |
|---|---|
| Model | NK080T100 |
| Hydraulic power | 100 Ton |
| Packaging size (L x W x H) | 1000 x 800 x 500-1000 mm |
| Feed opening size (L x H) | 1000 x 500 mm |
| Chamber size (L x W x H) | 1000 x 800 x 1500 mm |
| Capability | 3-6 bale/h |
| Bale weight | 200-350 kg |
| Voltage | 380 V / 50 Hz |
| Power | 15 kW / 20 HP |
| Machine size (L x W x H) | 1700 x 1400 x 3300 mm |
| Machine weight | 3.2 T |
| Material | Carbon steel |
Model NK080T100 in 100-ton configuration is the specification covered here. Options recorded for this application are the surrounding line items rather than the press itself: conveyor line, wire rope, woven bag and baling wire or PET strapping for tying finished bales. Bale length remains adjustable from 500 mm to 1000 mm, which sets bale weight within the 200-350 kg band.
Frame, chamber and press structure are carbon steel, with a machine weight of 3.2 T holding the unit steady under 100-ton pressing force. Waste enters through the 1000 x 500 mm feed opening, is compressed vertically inside the 1000 x 800 x 1500 mm chamber and leaves as a 1000 x 800 x 500-1000 mm bale. Overall dimensions are 1700 x 1400 x 3300 mm, so the baler is placed in a plant bay with access for feeding and bale removal.
The recorded application range covers food, pharmaceuticals, packaging, chemicals, electronics, metals, waste treatment and recycling plants. For production-line installations the recorded working condition is a high-temperature environment, and the recorded operation mode for this line type is continuous automatic operation with a PLC-controlled cycle at 24/7 industrial duty, with low-noise, low-energy and efficiency requirements noted at project level.
Because line control architecture is project-specific, state your plant requirements during inquiry so the proposed configuration is checked against them before order confirmation.
Plant baling solutions are confirmed against the material actually processed. Buyers are asked for material type, material dimensions, loose density, target bale weight or bale size, available floor space, power conditions, required automation level and required throughput before a model and solution are confirmed. Where the baler joins an existing waste route, the conveyor interface and bale tying method are agreed at the same stage.
Food, pharmaceutical, packaging, chemical, electronics, metal, waste treatment and recycling operations that need plant packaging waste compacted on site.
Conveyor line, wire rope and woven bag are recorded as matched equipment for this application. Share your line layout so the interface is confirmed.
Bales weigh 200-350 kg at 1000 x 800 x 500-1000 mm, depending on material density and the bale length selected.
380 V / 50 Hz three-phase with a 15 kW / 20 HP motor. Confirm your plant supply during inquiry.
Rated output is 3-6 bales per hour. The recorded duty for this line type is 24/7 industrial operation, so state your shift pattern and required throughput so capacity is checked against it.
Baling wire or PET strapping is used to tie finished bales before removal; jumbo bags and packing tools are available as matched equipment.
Material type, dimensions, loose density, target bale weight or size, available space, power conditions, automation level and required throughput.
Shaanxi Nick Machinery Equipment Co., Ltd. Contact: Nick. Email: Sales@nkbaler.com. Tel / WhatsApp: +86 15021631102. Address: Qun Sheng Lu, Hui Shan Qu, WuXi Shi, Jiang Su Sheng, China. Website: www.nkbaler.com.
Send your plant material details, line requirements and target bale weight so the NK080T100 configuration is confirmed for your site.
| Filename | Alt text |
|---|---|
| nk080t100-baler-food-pharma-packaging-01.jpg | NK080T100 vertical baler compacting plant packaging waste |
| nk080t100-baler-food-pharma-packaging-02.jpg | Vertical baler NK080T100 in a production workshop |
| nk080t100-baler-food-pharma-packaging-03.jpg | 100-ton baler NK080T100 used in a plant waste line |