{{ variable.name }}
The 175-series is a wide flexible conveyor chain for products that need a broad, continuous support face and a route that turns. A 175 mm moulded link in POM, PP or POK is pinned with SS304 stainless steel and side-flexes through horizontal, inclined, vertical, U-turn and S-curve paths. The width is used where trays, battery modules, grouped packs or large cartons cannot be carried stably on a mid-width chain, and where a curve is still required between process stations. The width is listed in the family as model 175FL, and 295 mm links are available where even more support is needed.
| Chain type | Flexible (side-flexing) conveyor chain, 175 series |
|---|---|
| Chain width | 175 mm |
| Model code | 175FL (295FL and 295M51T available in the wider group) |
| Pitch | 25.4 mm / 33.5 mm |
| Link material | POM / PP / POK |
| Pin material | SS304 stainless steel |
| Tensile strength | 3000–6000 N (family range, confirmed per width) |
| Max speed | 75 m/min |
| Min bending radius | 150 mm – 500 mm (by width and configuration) |
| Working temperature | -20 °C to 80 °C |
| Surface options | Plain / gripper / anti-static / rubber strip |
| Conveyor layouts | Horizontal, inclined, vertical, U-turn, S-curve |
175 mm is supplied as model 175FL. Neighbouring widths are 140 mm on the narrow side and 295 mm on the wide side, with 295FL and 295M51T in the widest group. Because every width comes from the same flexible chain family, sprockets, UHMW wear strips and maintenance procedure remain consistent when a plant runs several line sizes.
Links are injection moulded in POM, PP or POK and joined with SS304 stainless steel pins. The smooth, non-porous link surface is easy to clean, which suits cleanroom and battery assembly areas, and the modular construction allows a damaged section to be replaced without dismantling the whole conveyor. Replacement links are produced on our own moulds — about 500 are in service — and component geometry is verified by optical measurement.
New energy battery PACK transport, electronic manufacturing, food and beverage packing, cosmetics, pharmaceutical secondary packaging, daily chemical and logistics. The wide version is typically used for trays, modules, grouped packs and larger cartons that need a stable base through a curve.
Anti-static, food grade and GMP cleanroom versions, colour and width customization are available. Matching sprockets and UHMW wear strips are machined to drawing for the same chain path.
Is 175 mm wide enough for a battery module tray?
It depends on the tray footprint and weight distribution. Send the tray dimensions, weight and layout and we will confirm whether 175 mm or the 295 mm group fits.
Is an anti-static version available?
Yes, anti-static is one of the listed customization and surface options for the family; confirm it for the width you need at inquiry.
What is the bending radius at this width?
It falls within the 150 mm to 500 mm band and is confirmed for the specific width and layout.
Can the chain replace a transfer point between two conveyors?
Yes. Because the chain side-flexes through U-turn and S-curve routes, one drive can follow the path instead of a straight section plus a transfer.
Are spare links available?
Yes, links are moulded on our own tooling and can be supplied for an installed chain.
What is the maximum speed?
75 m/min across the flexible chain family.
Send the product and the path — tray or module dimensions, weight, chain route drawing, existing model code and quantity. We will confirm the width and matching running gear.
Contact: Fanni — cs-conveyor@wxcsjm.com — WhatsApp +86 189 2113 7719
Changshuo Conveyor Equipment (Wuxi) Co., Ltd., No.129 Xinhua Road, Meicun Town, Xinwu District, Wuxi, Jiangsu, China
www.csbelts.com


