{{ variable.name }}
Carbon steel press frame, PLC controlled cycle and a fixed 20 kg bale for agricultural material.
The NKB20 is a constant weight bagging machine for workshops that need every bag to leave the press at the same weight. Loose material is compressed in a 750 × 400 × 330 mm chamber and discharged as a 20 kg bale, so finished bag weight no longer depends on how an operator fills it. A 15 kW / 20 HP motor on a 380 V / 50 Hz supply drives a PLC controlled cycle, and 950 kg of carbon steel structure carries the machine through repeated compressions.
In straw and alfalfa work the press is normally fed by a conveyor and bales are closed with baling wire, PET strapping or a woven bag. One agricultural manufacturer in Pakistan runs a single NKB20 on straw and alfalfa with stable operation and low noise, and works to a 10 to 15 year service window.
| Parameter | NKB20 |
|---|---|
| Model | NKB20 |
| Machine type | Constant weight bagging machine |
| Bale size (L × W × H) | 750 × 400 × 330 mm |
| Bale weight | 20 kg |
| Voltage | 380 V / 50 Hz, three-phase |
| Power | 15 kW / 20 HP |
| Machine size (L × W × H) | 2980 × 20150 × 1550 mm |
| Machine weight | 950 kg |
| Frame material | Carbon steel |
| Control | PLC controlled press and bagging cycle |
| Duty | Continuous automatic operation, 24/7 industrial duty |
| Working condition | Indoor workshop, -10 ℃ to 45 ℃, normal humidity, light dust, stable three-phase supply |
| Compliance | EN ISO 12100:2010 · EN 60204-1:2018 · EN 415-1:2014 (EU/EEA verification of conformity, valid to 18 Sep 2029); machinery directive attestation to EN ISO 12100:2010 and EN 60204-1:2018, valid to 21 Mar 2027 |
One model is documented in this datasheet: the NKB20. Support equipment confirmed with the machine order includes conveyors for feeding straw and alfalfa, hydraulic components, baling wire, PET strapping, jumbo bags and packing tools.
The frame is built in carbon steel and weighs 950 kg, which holds the press steady through repeated compression cycles. Material enters a 750 × 400 × 330 mm chamber, is pressed to a fixed 20 kg bale and released for closing with wire, PET strap or a woven bag. The PLC control cabinet sequences the press and bagging steps; guarding and controls follow EN ISO 12100:2010 and EN 60204-1:2018.
The recorded use case is baling straw and alfalfa at an agricultural processing site. The same constant weight bagging principle applies across the industries listed for the machine: food, pharmaceuticals, packaging, chemicals, electronics, metals, waste treatment and recycling.
Because bale weight and chamber size must match the material, model confirmation uses these inputs from the buyer: material type, dimensions, loose density, target bale weight or size, available space, power conditions, automation level and required throughput. Customised baling equipment and complete-line projects are part of the manufacturer's scope, supported by a 15-person R&D team, a 5000 m² factory and an annual output of 600 units.
An agricultural manufacturer in Pakistan operates one NKB20 for baling straw and alfalfa. Reported result: stable operation with low noise, with a service expectation of 10 to 15 years.
What bale size and weight does the NKB20 produce?
Each bale measures 750 × 400 × 330 mm and is pressed to a constant 20 kg weight.
What power supply is required?
380 V / 50 Hz at 15 kW / 20 HP, on a stable three-phase supply as stated in the working condition specification.
Has the machine been used on straw and alfalfa?
Yes. An agricultural manufacturer in Pakistan runs one unit on straw and alfalfa with stable operation and low noise.
What equipment is supplied alongside it?
Conveyors, hydraulic components, baling wire, PET strapping, jumbo bags and packing tools are the support items specified for this duty.
Can the machine run continuously?
The PLC controlled cycle is specified for continuous automatic operation on a 24/7 industrial duty pattern.
What information is needed to confirm a model?
Material type, dimensions, loose density, target bale weight or size, available space, power conditions, automation level and required throughput.
Founded in 2013, 5000 m² factory, 50 employees, 15 R&D engineers, 600 units annual output, 90% export share, main markets in North America, South America and Asia.