{{ variable.name }}
The main-road build of the Elorry sprinkler range, carrying 12,000-20,000 L on a 6x4 chassis with a full-width rear bar, side spray, front flush and a cannon that reaches 28-40 m.

This configuration is sized for arterial roads, highways under construction, industrial haul routes and large municipal districts. The 6x4 chassis carries 12,000-20,000 L, and the tank shell steps up to 6 mm above 12,000 L with dished heads one gauge thicker, baffles welded every 1.5-2 m and a 120-micron epoxy lining against silt and chlorine in service water. Working numbers are predictable: at a 14 m spray width and 10-15 km/h, a 20,000 L load waters roughly 5-7.5 km of carriageway in about 30 minutes of spraying, and at 40 m3/h the tank fills in about 25-35 minutes, faster from a hydrant. Front flush, rear bar, side spray and cannon sit on four separate circuits, so one pass can move mud, bind dust and reach a tree line.
A 20,000 L load at 40 m3/h gives about 30 minutes of spraying, and 5-7.5 km of carriageway at 14 m width and 10-15 km/h.
Tank plate steps 5 mm from 5,000 to 12,000 L and 6 mm above 12,000 L, with dished heads one gauge thicker and baffles every 1.5-2 m.
360 degrees rotation and -10 to +60 degrees elevation throw water 28-40 m, for tall roadside trees, bridge soffits and a demolition face.
6-8 m suction lift with a 3-5 m hose and stainless strainer, plus a hydrant inlet and outlet so the truck can feed or be fed in the city.
Pneumatic or electric ball valves with manual override at the rear platform, a low-level alarm in the cab and wireless remote as an option.
Diesel 90-270 hp from Euro II to Euro V, manual 5-10 speeds or automated manual, LHD or RHD, for markets with varying fuel grades.
| Item | Specification |
|---|---|
| Drive configuration | 6x4 |
| Tank volume | 12,000-20,000 L |
| Tank shell | Q235B or Q345B carbon steel 5-6 mm, dished heads one gauge thicker |
| Interior | Epoxy anti-corrosion coating 120 microns or more; stainless 304 shell optional |
| Baffles | Every 1.5-2 m, same grade as the shell |
| Pump | PTO-driven self-priming centrifugal, 40-90 m3/h, head 45-90 m |
| Suction | 3-5 m hose, stainless strainer, lift 6-8 m |
| Fill time | About 25-35 minutes for 20,000 L at 40 m3/h |
| Spray widths | Front flush 8-16 m, rear bar 10-18 m, side spray both sides |
| Water cannon | 28-40 m, 360 degrees rotation, -10 to +60 degrees elevation |
| Working pressure | 0.3-0.8 MPa, main pipe DN65, nozzle orifice 16-22 mm |
| Coverage | About 5-7.5 km of carriageway per 20,000 L at 14 m width |
| Engine | Diesel 90-270 hp, Euro II to Euro V |
| Transmission | Manual 5-10 forward speeds, automated manual optional |
| Speed | Maximum 90-95 km/h, spraying 8-20 km/h |
| Manoeuvring | Turning diameter 15-19 m, ground clearance 240 mm |
| Working temperature | -20 to 45 degrees C, tropical cooling or cold-start package available |
Values shown are the build range for this configuration; final figures are fixed on the order sheet.
The 6x4 chassis is offered with 12,000 L, 15,000 L and 20,000 L tanks. Order-stage options include a stainless 304 tank shell, a 30-60 m fog cannon, a 10-15 MPa high-pressure washer with 10-20 m hose and gun, a pesticide or disinfectant dosing unit with separate tank and metering valve, wireless remote control and a sleeper cab.
Shell and baffles are Q235B or Q345B carbon steel, dished heads one gauge thicker, with a 120-micron epoxy interior. Piping is galvanised steel DN65 with flanged joints and a stainless option; valves are brass or stainless ball valves with pneumatic or electric actuators and a cast iron gate valve at the main outlet. The pump uses a cast iron casing, bronze impeller, mechanical seal and stainless shaft sleeve. The cannon has an aluminium alloy body, brass nozzle and worm-gear rotation. Platform, ladder and handrail are galvanised steel or aluminium checker plate, fixed to a Q235 sub-frame bolted to the chassis rails.
Tank volume, pump flow, spray widths and cannon range are set at order stage from the road width, daily watering area, water source and distance, dust or greenery duty, climate and local spraying rules. The specification is written before production, so optional equipment such as the fog cannon or high-pressure washer is built in rather than retrofitted later.
Application: road washing, dust suppression and agricultural irrigation. The 20 m3 unit passed all ex-works tests and inspections, with the spraying system covering several industry uses.
Delivered June 2025 and about 17 months in service. Anti-corrosion water tank, multi-circuit spraying system and durable chassis; export documentation and container loading were handled end to end and delivery met the agreed schedule.
Four pre-shipment checks covered engine, tyres, gearbox and full vehicle function including the spraying system. The client reported satisfaction with unit condition, service attitude and delivery efficiency.
At a 14 m spray width and 10-15 km/h, a 20,000 L load waters about 5-7.5 km of carriageway in roughly 30 minutes of spraying.
About 25-35 minutes for 20,000 L at 40 m3/h, shorter with a hydrant feed. The hydrant inlet and outlet use standard hose couplings.
12,000 L, 15,000 L and 20,000 L. Above 12,000 L the shell is 6 mm; the stainless 304 shell is an option.
The cannon rotates 360 degrees with -10 to +60 degrees elevation and 28-40 m range, and the hydrant coupling lets the truck feed or be fed by a hydrant.
Diesel 90-270 hp, Euro II to Euro V, matched to local fuel quality, with manual 5-10 speed or automated manual transmission.
100 percent pre-shipment check: tank leak test, pump flow and pressure test, spray width and cannon range measurement, valve and alarm check, brake test and road test.
FOB, CIF or DAP, by RoRo or break-bulk vessel at 1-3 units per shipment, about 35 working days from down payment, 12 months warranty on major components.
Share the road width, daily watering area, water source and distance, and whether the priority is dust binding, greenery or street washing. Tank volume, pump flow, spray width and cannon range follow from those answers.
Email: info@elorry-ind.com | WhatsApp: +86-16638078903 | Tel: +86-13083602803
Henan Elorry Industrial Co., LTD. - Zhengzhou, Henan, China | www.elorry-ind.com


