{{ variable.name }}
Product summary. A 6x4 truck-mounted sweeper built for highways, runways, ports and heavy industrial yards. The 16,000-25,000 kg GVW chassis carries a water tank up to 10 m3 and a dust bin up to 12 m3, with a sweeping width adjustable up to 3.6 m and a working area up to 90,000 m2/h. Front axle capacity goes to 7,500 kg and the rear axle to 16,000 kg, on 11.00R20 tyres with up to 10 tyres plus a spare, and a 300 L fuel tank supports long shifts away from the depot.
Road sweeper truck in 6x4 configuration with the wide suction nozzle and side spray bar engaged.
| Item | Specification |
|---|---|
| Drive configuration | 6x4 |
| GVW | 16,000-25,000 kg |
| Rated payload | 2,000-12,000 kg range |
| Overall dimensions | Length 5,950-10,500 mm, width 2,000-2,550 mm, height 2,380-3,300 mm |
| Wheelbase | 2,800-4,600 mm |
| Sweeping width | 2.2-3.6 m adjustable, single-side or dual-side |
| Working area | 20,000-90,000 m2/h depending on width and working speed |
| Water tank / dust bin | 1-10 m3 / 2-12 m3, rear tipping or rear door |
| Axle capacity | Front 1,800-7,500 kg / rear 3,500-16,000 kg |
| Tyres | 7.00R16 to 11.00R20, 6-10 tyres plus one spare |
| Engine / auxiliary engine | Diesel 85-250 kW, Euro II to Euro V / 57-100 kW |
| Suspension and brakes | Leaf spring, air suspension optional on 6x4; air brake with ABS and spring parking brake |
| Maximum particle diameter | 100-150 mm at the suction nozzle |
| Working / transport speed | 3-20 km/h / 90-100 km/h |
| Fuel tank / electrical | 100-300 L / 24 V |
| Working temperature | -20 to +50 degrees C; tropical cooling or cold-start package available |
The 6x4 build is quoted with water tank from 1 to 10 m3 and dust bin from 2 to 12 m3, sweeping width from 2.2 to 3.6 m, and a kerb brush on the left, the right or both sides. Engine output runs from 85 to 250 kW in Euro II to Euro V, with a manual 5-10 speed gearbox or an automated manual. Air suspension, a fog cannon, a separate washing boom, a hand-held spray gun, a drinking-water tank and stainless steel 304 tanks are available as specified options.
Body and tanks are Q235/Q345 carbon steel, shot-blasted, epoxy-primed and polyurethane topcoated, with stainless steel 304 used for the water tank and dust bin in humid or corrosive service. The dust bin floor and discharge door are 4-6 mm wear-resistant steel. The chassis frame and bolted sub-frame are Q235/Q345 steel at 6-8 mm. Brushes are polypropylene or nylon filament discs with replaceable segments and optional steel-wire tufts; the suction nozzle is Q345 wear-resistant steel with replaceable rubber or polyurethane wear strips.
Philippines - municipal sanitation department and road maintenance contractor. Four units with 8 m3 hoppers were delivered for municipal road sweeping and dust control on main roads and in industrial zones. At the typical two-year service point, the operator reports stable sweeping performance and a reduced manual sweeping workload. The configuration highlights are combined suction and sweeping, water spray for dust suppression, and easy access for daily maintenance.
Sales engineers fix tank volume, sweeping width, brush layout and axle configuration against the road swept, the typical debris, the daily kilometre count, water availability on site and the tipping point. Left-hand or right-hand drive, emission level and cooling package are set to the destination market, so the truck suits the fuel, climate and traffic rules where it will work.
Tell us the route length, the surface, the debris type, the daily hours and where the bin is tipped, and the 6x4 configuration is quoted against those answers.
Tel +86-13083602803 | WhatsApp +86-16638078903 | Email info@elorry-ind.com
Supplier factory qualification assessed by SGS under the Alibaba Gold Plus Supplier Assessment Criteria, certificate 479886222_T, valid to 06 Nov 2026.