{{ variable.name }}
Vertical hydraulic baler with a 90 ton press, two chambers, manual feeding and 10-12 bales per hour output for garment and sack packing lines.

The NK-T90L is a double chamber vertical baler built for garment and sack packing operations. A 90 ton hydraulic system working at 25 MPa compresses loose material into bales measuring 760 mm by 520 mm, with a bale height between 500 mm and 1,000 mm and a resulting bale weight of 75 kg to 150 kg. Output runs at 10 to 12 bales per hour. Material is loaded by hand through a 750 mm by 550 mm feed opening, and each finished bale is secured with five horizontal ties in two rows plus vertical ties. The frame is carbon steel, the machine measures 3,800 mm by 1,500 mm by 4,600 mm, and the complete unit weighs 4.8 t.
90 ton hydraulic power at a 25 MPa working pressure compacts garments and sacks into dense, tied bales instead of loose material.
Two baling chambers are carried on one carbon steel frame measuring 3,800 x 1,500 x 4,600 mm, so a single machine footprint covers two chamber positions.
Bale height runs from 500 mm to 1,000 mm, matching bale weights from 75 kg to 150 kg for different handling and transport targets.
A rated output of 10 to 12 bales per hour gives a predictable throughput figure for planning packing-line capacity.
The 18.5 kW / 25 HP drive runs on 380 V / 50 Hz three-phase supply, a common configuration in industrial workshops.
The packing way uses five horizontal ties in two rows combined with vertical ties, keeping bales closed during stacking and loading.
| Model | NK-T90L |
|---|---|
| Machine type | Double chambers clothes baler, vertical machine |
| Hydraulic power | 90 Ton |
| Working pressure | 25 MPa |
| Bale size (L x W x H) | 760 x 520 x 500-1,000 mm |
| Feed opening size (L x H) | 750 x 550 mm |
| Packing materials | Garment, sack |
| Output capacity | 10-12 bales/h |
| Bale weight | 75-150 kg |
| Voltage | 380 V / 50 Hz |
| Packing way | Horizontal 5 x 2, vertical |
| Power | 18.5 kW / 25 HP |
| Feeding way | Manual |
| Machine size (L x W x H) | 3,800 x 1,500 x 4,600 mm |
| Machine weight | 4.8 T |
| Material | Carbon steel |
This page documents one configuration: NK-T90L with 90 ton hydraulic power, a 380 V / 50 Hz supply, manual feeding and a 760 x 520 mm bale footprint. Bale height and therefore bale weight move within the documented 500-1,000 mm and 75-150 kg ranges. Where a project needs a different bale size, voltage or throughput, the specification is confirmed by our engineering team against the material data supplied by the buyer before the order is placed.
The machine is built on a carbon steel frame with a total machine weight of 4.8 t and an overall height of 4,600 mm. The double chamber body sits under a 90 ton hydraulic system operating at 25 MPa, and the 18.5 kW motor drives the hydraulic circuit from a 380 V / 50 Hz supply. The feed opening measures 750 mm by 550 mm and is loaded manually. Finished bales are tied in the horizontal 5 x 2 pattern with additional vertical ties, which suits the bale format produced in the 760 x 520 mm chamber.

The documented packing materials for the NK-T90L are garments and sacks. Typical installations are recycling workshop upgrades, new recycling plants, small processing workshops and warehouse or industrial waste management projects, where loose material is compressed into bales that are easier to store, handle and transport. The machine is intended for indoor workshop use with an ambient temperature of -10 degrees C to 45 degrees C, normal humidity, light dust and a stable three-phase power supply.

Baling results depend on the material being pressed. To confirm a model and solution, buyers are asked to provide the material type, material dimensions, loose density, target bale weight or size, available floor space, power conditions, required automation level and required throughput. Matched equipment around the baler includes conveyors, baling wire, PET strapping, jumbo bags, packing tools, shredders and crushers where the line requires them.
The documented packing materials are garments and sacks. Send your material type, dimensions and loose density so suitability can be confirmed before ordering.
The bale footprint is 760 x 520 mm, bale height ranges from 500 mm to 1,000 mm, and bale weight falls between 75 kg and 150 kg.
The documented specification is 380 V / 50 Hz with an 18.5 kW (25 HP) motor. Confirm your site voltage and frequency with our team before ordering.
Feeding is manual. The operator loads material through the 750 x 550 mm opening before each pressing cycle.
The packing way is horizontal 5 x 2 plus vertical ties. Baling wire and PET strapping are the consumables listed as matched equipment for baling lines.
The machine measures 3,800 mm long, 1,500 mm wide and 4,600 mm high, so plan a bay with sufficient ceiling height and confirm the layout before installation.
Material type, dimensions, loose density, target bale weight or size, available space, power conditions, automation level and required throughput. Pricing, MOQ and lead time are quoted per project.
Tell us the material you bale and the bale weight or size you need, and our team will confirm the NK-T90L configuration for your site.
Page slug: nk-t90l-double-chamber-garment-baler
| File name | vertical-baler-nk-t90l-double-chamber-front.jpg |
|---|---|
| Alt text | NK-T90L double chamber vertical baler front view with feed opening |
| File name | vertical-baler-nk-t90l-press-section.jpg |
| Alt text | Double chamber press section of the NK-T90L 90 ton vertical baler |
| File name | vertical-baler-nk-t90l-workshop-installation.jpg |
| Alt text | NK-T90L baler installed in a recycling workshop for garment baling |
| File name | vertical-baler-nk-t90l-carbon-steel-frame.jpg |
| Alt text | Carbon steel frame and 4.8 t base of the NK-T90L baler |