Model DT-20261003
1220 x 2440 x 10 mm
CNC Engraving Ready
CNC Engraving Ready PVC Celuka Foam Board 10mm Smooth Edge
A homogeneous-core PVC Celuka foam board built for advertising letter engraving. The 10 mm sheet is sized 1220 x 2440 mm and formulated from PVC and calcium carbonate, so it cuts without chipping and leaves smooth edges for 3D letters, custom logos and outdoor signage.
Product Summary
Model DT-20261003 is a PVC Celuka foam board supplied in a 1220 x 2440 x 10 mm sheet. It is engineered around one job: clean, precise engraving for the advertising industry. Because the core is homogeneous, CNC machining does not open up voids or cause the surface to chip, and the cut edges come off the machine smooth enough that no extra polishing step is needed. The board is lightweight enough to lift and mount on walls and fascias, and it is waterproof for outdoor signage. It is made from PVC and calcium carbonate.
Key Features
- Homogeneous Celuka core: resists chipping and tear-out during CNC engraving, so lettering and logo edges stay sharp.
- Smooth cut edges: edges are clean straight off the router, removing a separate polishing step and saving finishing labor.
- 1220 x 2440 x 10 mm sheet: a practical working size for 3D letters and custom logo panels.
- Lightweight PVC foam build: easier to handle, lift and mount onto signs and fascias.
- Waterproof for outdoor signage: supports signs that are displayed outside.
- PVC and calcium carbonate base: the material formulation specified for this board.
Technical Specifications
| Parameter | Specification |
|---|
| Model | DT-20261003 |
| Product Type | PVC Celuka foam board |
| Sheet Size | 1220 x 2440 mm |
| Thickness | 10 mm |
| Material | PVC and calcium carbonate |
| Core Structure | Homogeneous Celuka core |
| Primary Application | Advertising letter engraving |
Models and Options
This listing covers model DT-20261003 in the 1220 x 2440 x 10 mm sheet. Buyers who need a different configuration for a specific project can send their requirements to the sales team for discussion before ordering.
Materials and Structure
The board is produced from PVC combined with calcium carbonate. The Celuka process gives it a homogeneous core, meaning the density is consistent through the sheet rather than forming a separate skin and hollow center. In practice this matters at the cutting stage: when a CNC router or engraver passes through the board, the tool meets uniform material, which is why the board does not chip and why cut edges come out smooth. This structure is the reason the sheet can go straight from machining to mounting without an intermediate polishing step.
Applications
Advertising Letter Engraving
The primary use of DT-20261003, where clean engraved lettering is required.
3D Letters and Custom Logos
Smooth cut edges suit dimensional lettering and custom logo work.
Outdoor Signage
The board is waterproof for signage that is displayed outdoors.
Customization
Project requirements vary from buyer to buyer. If your signage or engraving work calls for a specification not shown on this page, share the details with our team and we will confirm what we can supply before you commit to an order.
Frequently Asked Questions
What size and thickness is this PVC foam board?
Model DT-20261003 is supplied in a 1220 x 2440 mm sheet at 10 mm thickness.
What is the board made from?
It is made from PVC and calcium carbonate, produced as a Celuka foam board.
Will it chip when I CNC engrave it?
The homogeneous core is designed to resist chipping during CNC engraving, so engraved lettering stays clean.
Do I need to polish the cut edges?
No. The board produces smooth cut edges, so an additional polishing step is not required.
Is it suitable for outdoor signs?
Yes. The board is described as waterproof for outdoor signage use.
Is it heavy to mount?
It is a lightweight PVC foam board, which makes it easier to handle and mount onto fascia and wall surfaces.
Can I request a different configuration?
Yes. Contact the sales team with your requirements and we will confirm what can be supplied.
Inquiry Information
Send your project details and we will respond with the information you need to order model DT-20261003.
- Contact: Mary
- Email: dingtian@dingtianplastics.com
- Tel: +86 533 6125588
- WhatsApp: +86 13589520151
- Address: #6 Xinwei Road, Economic Development Zone of Zichuan, Zibo, Shandong, China
Image Filename and Alt Suggestions
Filename: pvc-celuka-foam-board-dt-20261003-sheet.png
Alt: 10mm PVC Celuka foam board DT-20261003 sheet used for CNC engraved advertising letters
