{{ variable.name }}
The coarse end of the cast steel shot range, using the heaviest particle sizes for thick scale, casting cleaning and high-impact descaling duty.

Cast Steel Shot is produced as a full series from S70 to S930. This page covers the coarse end of the range, S460, S550, S660, S780 and S930, where the larger particle mass delivers a heavier impact on thick mill scale, sand burn-on and heavy rust.
All sizes are made from high carbon cast steel with a spherical shape, 7.8 g/cm³ specific gravity and 4.5-4.8 g/cm³ bulk density, and are supplied in either the HRC 40-50 or the HRC 55-65 hardness grade. Coarse shot is typically run in applications where the priority is fast removal of thick contamination rather than fine surface finishing.
Larger S460 to S930 particles carry more mass per hit, which speeds up removal of thick scale, rust and sand burn-on.
Rounded particles resist the fracture pattern of angular media and reduce wear on blast wheels and liners.
Coarse sizes are available at HRC 40-50 for cleaning duty or HRC 55-65 where harder impact is required.
Long service life means fewer top-ups on high-throughput foundry and shipyard lines.
Lower dust reduces loading on extraction systems during continuous descaling shifts.
Size designations match recognised SAE grading so coarse shot can be matched to existing separators.
| Property | Value |
|---|---|
| Material | High carbon cast steel |
| Coarse sizes in this variant | S460, S550, S660, S780, S930 |
| Full series range | S70 to S930 (twelve sizes) |
| Hardness options | HRC 40-50 or HRC 55-65 |
| Particle shape | Spherical |
| Specific gravity | 7.8 g/cm³ |
| Bulk density | 4.5-4.8 g/cm³ |
| Recyclable cycles | 1000+ |
| Grading standard | SAE J441 / J827 |
| Test report standards | JB/T8354-1996, YB/T5150-93, GB/T88.3 |
| Quality system | ISO9001 |
The five coarse designations are highlighted below. The finer sizes of the same series are produced for work that needs a lighter impact and a smoother profile.
Coarse grades can be customized to the customer blasting machine and separator setting.
High carbon cast steel is melted in medium-frequency induction furnaces, granulated by centrifugal atomization, then quenched and tempered, rounded and screened. Screening produces the graded S designations, so each size band stays consistent within the batch.
Each batch is tested for chemical composition and fatigue life and inspected by pre-shipment sampling. MTC test reports are issued against JB/T8354-1996, YB/T5150-93 and GB/T88.3.
Coarse sizes can be supplied as a customized grade to suit a specific machine and separator. The plant runs on 20,000 m² with an annual capacity of approximately 100,000 tons, which supports bulk programmes for foundries and shipyards.
Foundries, shipbuilding and ship repair companies and structural steel fabricators are part of a five-year supply programme that spans AR, ES, FR, GB, IR, KR, MY, PK, PT, SA, TH, US and VN, with 100 tons per order and annual supply over 500 tons.
Coarse S460 to S930 sizes are intended for heavy contamination and high-impact cleaning such as casting descaling and thick scale removal. The same series also includes finer sizes down to S70 when a lighter impact and smoother profile are needed.
Both HRC 40-50 and HRC 55-65 are available in the coarse sizes. The choice depends on the workpiece and the impact level required by the process.
The particles are spherical rather than angular, which supports a smooth surface profile and reduces wear on blast wheels according to the product characteristics.
Yes. The series is rated for 1000+ recyclable cycles and is used with abrasive recovery and recycling systems.
MTC test reports against JB/T8354-1996, YB/T5150-93 and GB/T88.3, plus chemical composition and fatigue life testing of each batch.
Keep it dry to prevent caking, particularly before loading into the machine hopper.
Tell us the casting or plate condition and the machine type so the coarse size band and hardness grade can be confirmed.