{{ variable.name }}
SLT series · instrument and power air · 24/7 duty · field-proven steel plant installation
SLT centrifugal turbo compressor — high-volume oil-free air supply for steel production lines
Steel plants run compressed air into blast furnace smelting, converter steelmaking, continuous casting and rolling mill pneumatic controls, and into the plant-wide instrument air header that feeds pneumatic valves, automated control systems and bag-filter dust removal. Interrupt that supply and the line stops. The SLT centrifugal turbo air compressor is specified for this continuous duty: 100% oil-free air, 70–4000 m³/min flow and 2.1–12.5 barg outlet pressure across the series, with rotor assemblies balanced below G1. Final values are fixed per model and configuration.
Continuous, high-volume air delivery matches the non-stop duty of steel lines and removes air-supply interruptions as a source of costly downtime.
100% oil-free delivery protects pneumatic valves and automated control equipment downstream, supporting service life and control precision.
Semi-open 3D impellers designed in NREC software with backward-swept blades and an optimized volute tongue hold stage efficiency over a wide operating range.
Rotor dynamic balance below G1, with every impeller, gearbox and rotor precision balanced and overspeed tested before shipment.
The control system calculates minimum load limits and limits maximum load under variable conditions, protecting the motor from overcurrent.
Impellers and wetted parts in titanium alloys and stainless steel, suited to high-temperature, heavy-load steel plant environments.
| Model series | SLT300, SLT800, SLT1250, SLT1800, SLT2500, SLT3700, SLT6000, SLT8000, SLT72000 |
|---|---|
| Flow rate | 70–4000 m³/min (series range) |
| Outlet pressure | 2.1–12.5 barg (series range) |
| Unit weight | 11.0–85.0 t (series range) |
| Delivered air | 100% oil-free |
| Rotor dynamic balance | Grade below G1 |
| Impeller and wetted material | Titanium alloys, stainless steel |
| Operation mode | Continuous operation under high temperature and heavy load |
| Compression stage | Single-stage or multi-stage, per duty point |
| Gas media | Air, nitrogen, oxygen-enriched gas |
Frame sizes from SLT300 to SLT72000 cover the series range. Steel plants typically size the frame against total plant air demand plus instrument air reserve, then fix stage count and arrangement; small units are built as an integrated skid and large units in a split arrangement.
Impellers and wetted parts are offered in titanium alloys and stainless steel, with in-house machined gearboxes and balanced rotor assemblies. The oil-free compression path keeps the delivered air clean from inlet to discharge, and the split arrangement on large frames supports heavy transport and service access.
Blast furnace smelting airConverter steelmaking and continuous castingRolling mill pneumatic controlPlant-wide instrument airBag filter dust removal systems
Steel manufacturing plant, Argentina — 1 unit, purchased 2022, in stable continuous service for over three years.
The centrifugal air compressors supply large-volume, continuous and stable compressed air to the core production processes: power air for blast furnace smelting, converter steelmaking, continuous casting and rolling mill pneumatic control systems, plus clean instrument air for plant-wide pneumatic valves, automated control systems and bag filters.
Reported results: no failure during continuous operation, meeting 24/7 steel production requirements and avoiding downtime from air-supply interruption; high operational efficiency reducing electricity cost per ton of steel; compressed air meeting the steel industry standards for instrument and power air; stable dust-removal operation supporting compliance with local environmental emission standards in Argentina.
Duty-point sizing, stage count, skid or split arrangement, gas medium and wetted materials are specified per project. OEM and ODM support is available for buyers requiring their own documentation and branding.
In the Argentina steel project, the centrifugal compressors supply both power air for smelting and forming lines and clean instrument air for valves, controls and bag filters.
Yes. The SLT series is specified for 100% oil-free air delivery, which is why it suits instrument air duties in steel plants.
Rotor assembly dynamic balance is below G1, with precision balancing and overspeed testing of every impeller, gearbox and rotor before shipment.
The series covers 70–4000 m³/min and 2.1–12.5 barg. Send the total plant air demand, instrument air reserve and pressure level so the frame and stage count can be fixed.
An EC Declaration of Conformity for air compressors (ECM, no. 0P230209.SSE0Q23, valid to 2028-02-08) and ISO 14001 certification (NOA, no. 05126E00664R053, valid to 2029-03-26).