{{ variable.name }}
Sealed integrated housing, dust-proof intake, patented anti-oil-emulsification design and altitude adaptation above 4,000 m.
Underground and open-pit mining duty is hard on an air compressor: high dust concentration, high humidity, altitude up to 5,000 m and 24/7 heavy operation. This integrated screw airend addresses that combination with a dust-proof intake, a sealed integrated housing and a patented anti-oil-emulsification design (ZL2025 1 1888313X) for vehicle screw air compressors, so pneumatic power stays available for rock drills, mining jumbos, anchor drill rigs and mining trucks. The 9-in-1 assembly places the airend, oil-gas separator tank with built-in coarse separator, three filters and four valves in a 410 x 330 x 310 mm, 45 kg package. Power is 2.2-4 kW, free air delivery 0.25-0.4 m3/min at 7 bar, maximum working pressure 12.5 bar, maximum discharge temperature 105 C and noise 75 dB(A) or lower.
Intake protection for high-dust underground and open-pit sites, supporting stable operation in the drilling rig programme.
Encloses the 9-in-1 assembly against dust and humidity ingress on chassis-mounted mining equipment.
Method and system patent ZL2025 1 1888313X addresses oil emulsification in vehicle screw air compressors, protecting lubrication in humid workings.
Altitude oxygen compensation port supports air output at high altitude, as applied in the mining truck programme.
Design limit 3 ppm; cleaner air protects drill rig valves, lubricators and downstream tools.
Compact footprint eases installation on drill rigs, jumbos and truck chassis where space is limited.
| Power | 2.2-4 kW |
|---|---|
| Speed | 3500 rpm |
| Free air delivery at 7 bar | 0.25-0.4 m3/min |
| Working pressure | Maximum 12.5 bar / minimum 5 bar |
| Maximum discharge temperature | 105 C |
| Oil carry-over | Below 2 ppm (design limit 3 ppm) |
| Noise | 75 dB(A) or lower |
| Net weight | 45 kg |
| Dimensions (L x W x H, excl. air filter assembly) | 410 x 330 x 310 mm |
| Mining protection | Dust-proof intake, sealed integrated housing, patented anti-oil-emulsification design (ZL2025 1 1888313X) |
| Altitude adaptation | Above 4,000 m, with altitude oxygen compensation intake port |
| Configuration | 9-in-1: screw airend + oil-gas separator tank (built-in coarse separator) + 3 filters + 4 valves |
| Motor options | 24 V DC / 540 V DC |
| Housing material | High-grade cast iron (aluminium-alloy housing under development) |
Pneumatic power for rock drilling rigs, mining jumbos and anchor drill rigs working in high-dust and high-humidity underground and open-pit conditions, plus braking, unloading and tyre inflation air supply for mining trucks. The same platform is used on construction machinery, new energy mining trucks, special vehicles and rail auxiliary air systems.
Mining configurations are set against dust level, humidity, altitude and the air consumer on the machine, with the altitude oxygen compensation port specified where site altitude requires it. Motor voltage (24 V DC or 540 V DC) is selected per vehicle platform, the air filter is optional, and standardised mounting interfaces support fleet-level replacement programmes.
Approximately 250 units per year over two years for rock drilling rig, mining jumbo and anchor drill rig pneumatic power sources, with stable operation in high-dust and high-humidity underground and open-pit sites. Configuration highlights: dust-proof intake, sealed housing and patented anti-oil-emulsification design.
A second reference is a mining truck OEM with joint development since 2024, approximately 150 units per year for braking, unloading and tyre inflation air supply, resulting in a mining-dedicated unit with reliable air output at high altitude and altitude adaptation above 4,000 m.
The mining configuration uses a dust-proof intake and a sealed integrated housing around the 9-in-1 assembly.
Humidity in the intake air can emulsify lubricating oil. The patented anti-oil-emulsification method and system (ZL2025 1 1888313X) is applied to vehicle screw air compressors to prevent it.
Yes. An altitude oxygen compensation intake port is available and the mining truck programme applies the unit above 4,000 m.
0.25-0.4 m3/min at 7 bar, minimum 5 bar and maximum 12.5 bar working pressure, with a maximum discharge temperature of 105 C.
Yes. The mining-dedicated programme covers configurations with 6.3-8.1 m3/min air output for truck air systems.
ISO 9001:2015 certified by SGS (CN-ISO9001-WSD-2024-012), IATF 16949 automotive quality management and CE under TUV Rheinland (CE-WSD-GCU-2023-001).
45 kg net weight, 410 x 330 x 310 mm excluding the air filter assembly.
Supplier: Wuxi Woyo Superdo Compressor Co., Ltd. (WOLXAIR), founded 1996, 20,000 m2 facility, 12,000 units annual output, 35 engineers.
Email: service@woyo.cn | Tel: +86 510 6599 6655 | WhatsApp: +86 189 1237 9878
Address: No.5 Changkang Road, Mashan, Binhu District, Wuxi, Jiangsu, China
Tell us your machine type, site altitude, dust and humidity conditions and required air consumers so the mining configuration can be specified.