{{ variable.name }}

The NKW250BD is also supplied as a fully automatic horizontal hydraulic baler for projects that run the baling cycle under PLC control instead of operator-controlled tying. Pressing force is 250 tonnes at 23 MPa, the feed opening measures 2000 × 1100 mm, and a 12000 × 2000 mm conveyor (4.5 kW, 5000 kg) keeps material moving into the chamber. Bales of 1100 × 1250 × 1700 mm are produced at 10–15 tonnes per hour and closed with five 6# or 8# wires. The hydraulic system is cooled by water or an oil chiller, and the carbon steel machine weighs 30000 kg.
The product is offered as a fully automatic horizontal hydraulic baler, so compression and tying run as a continuous cycle rather than a manual sequence.
Operation is PLC controlled with a repeatable cycle, the mode required for continuous automatic operation and 24/7 industrial duty in recycling lines.
250 tonnes of hydraulic power at 23 MPa compacts waste paper, plastics, scrap metal and textiles into dense, transportable bales.
The 10–15 t/h capacity keeps pace with conveyor-fed lines where the baler runs continuously instead of in single batches.
A 12000 × 2000 mm conveyor rated 4.5 kW feeds the 2000 × 1100 mm opening, matching automatic operation with minimal manual handling.
Water cooling or an oil chiller manages hydraulic oil heat during long automatic runs, including warm workshops.
| Model | NKW250BD |
|---|---|
| Baler type | Fully automatic horizontal hydraulic baler |
| Hydraulic power | 250 ton |
| Working pressure | 23 MPa |
| Cylinder size | Ø350–4300 |
| Bale size (W × H × L) | 1100 × 1250 × 1700 mm |
| Feed opening (L × W) | 2000 × 1100 mm |
| Capacity | 10–15 T/hour |
| Motor power | 45 kW / 60 HP |
| Bale wire | 6# / 8# × 5 pcs |
| Cooling system | Water cooling / oil chiller |
| Machine weight | 30000 kg |
| Conveyor size (L × W) | 12000 × 2000 mm |
| Conveyor power / weight | 4.5 kW / 5000 kg |
| Main material | Carbon steel |

Frame, pressing chamber and platen are fabricated in carbon steel. The hydraulic cylinder (Ø350–4300) works at 23 MPa and is powered by a 45 kW / 60 HP motor, with a water circuit or oil chiller controlling oil heat in continuous operation. Machine weight is 30000 kg and the conveyor adds 5000 kg; both should be checked against floor loading before installation. Bales are closed with five 6# or 8# wires. Company-level conformity documentation covers EN ISO 12100:2010, EN 60204-1:2018 and EN 415-1:2014 (EU/EEA verification of conformity) and a UDEM machinery-directive attestation for the EU/EEA/TR market.
Suited to continuous recycling and material-compression projects in food, pharmaceuticals, packaging, chemicals, electronics, metals, waste treatment and recycling. Recorded project conditions include continuous automatic operation, PLC-controlled cycles and 24/7 industrial duty, with matched equipment such as a conveyor line, wire rope and woven bags. Project requirements note low-noise design and low energy consumption, which are confirmed against each site specification. The baler works indoors at –10 °C to 45 °C, normal humidity and light dust on a stable three-phase supply.
Solution confirmation starts with your material: type, dimensions, loose density, target bale weight or size, available floor space, power conditions, automation level and required throughput. The manufacturer's 15-person R&D team and 5000 m² factory (founded 2013, 50 employees, 600 units annual output, 90% export share, main markets North America, South America and Asia) also supports customized baling equipment and complete-line projects.
What does fully automatic mean on this baler?
The product is offered as a fully automatic horizontal hydraulic baler: the compression and tying sequence runs under PLC control as a continuous cycle, instead of an operator-controlled manual tie.
What throughput and bale size does it deliver?
10–15 tonnes per hour, producing 1100 × 1250 × 1700 mm bales closed with five 6# or 8# wires.
Which cooling system suits continuous operation?
Water cooling or an oil chiller are both listed options; the choice is confirmed against ambient temperature and shift pattern.
How much power does it need?
45 kW / 60 HP from a stable three-phase supply; the conveyor adds 4.5 kW.
When should I choose the semi-automatic version instead?
When output per shift is lower and an operator-controlled cycle with manual tying fits the site. Both versions come from the same NKW250BD product range.
What installation conditions are required?
Indoor installation at –10 °C to 45 °C, normal humidity, light dust, a stable three-phase supply, and floor capacity for a 30000 kg machine plus a 5000 kg conveyor.
What information do you need to propose a solution?
Material type, dimensions, loose density, target bale weight or size, available space, power conditions, automation level and required throughput.
Contact: Nick
Email: Sales@nkbaler.com · Tel / WhatsApp: +86 15021631102
Address: Qun Sheng Lu, Hui Shan Qu, WuXi Shi, Jiang Su Sheng, China
Website: www.nkbaler.com · Catalogue: Horizontal Baler catalogue (PDF)