{{ variable.name }}
Dry screw airend with a wear-free air-side seal, a liquid-cooled jacket housing and a cloud-connected controller built for round-the-clock unattended duty.

The SLTOF dry oil-free screw air compressor is built for plants where a single trace of oil in the compressed air line counts as a quality failure. The compression chamber is completely sealed off from the lubricated oil chamber: the air side uses a wear-free sealing system with a stainless steel spring-loaded metal ring, and the lubricating oil side uses a copper labyrinth seal. The range covers 45-250 kW (60-335 hp), 7-10 bar working pressure and 3.7-46 m³/min air displacement, and meets ISO 8573-1 Class 0 air quality. A jacket type liquid cooling shell, a vertically installed cooler and an intelligent control system keep output stable under continuous duty.
The air side relies on a wear-free sealing system with a stainless steel spring-loaded metal ring, while the oil side uses a copper labyrinth seal, so lubricating oil stays in its own chamber instead of entering the compressed air.
The dry oil-free airend is fitted with a shell jacket and cooled by water to limit high-frequency noise transfer; a pipe muffler sits at the outlet of each compression host, with sound insulation panels inside the unit and baffles on every cooling air inlet.
Screw surfaces and shell interiors use a specially customized coating material and coating process for high-temperature, high-pressure, acid, alkali and wear resistance. Bearings are specified for high temperature and high pressure running.
The gear shaft seal is designed so that, even if the seal fails, oil leaks back to the oil tank rather than into the compression chamber.
Jacket type liquid cooling shell with a vertically installed cooler in a side-suction, top-discharge layout. Large frames use a split cooler to reduce thermal stress and increase stability.
Voltage, phase sequence and current detection, running-hour accumulation, overload, over-pressure and high-temperature alarms, maintenance reminders and multi-level password protection. PID constant-pressure and frequency-conversion adjustment plus remote monitoring from a phone.
| Working power | 45-250 kW |
|---|---|
| Horsepower | 60-335 hp |
| Working pressure | 7-10 bar |
| Air displacement | 3.7-46 m³/min |
| Air quality | ISO 8573-1 Class 0 oil-free air |
| Sealing system | Air side: wear-free stainless steel spring-loaded metal ring; oil side: copper labyrinth seal |
| Cooling | Jacket type liquid cooling shell; vertical cooler, side suction and top discharge; split cooler on large units |
| Rotor surface | Customized coating for high temperature, high pressure, acid, alkali and wear resistance |
| Control | Intelligent controller with PID constant-pressure and frequency-conversion adjustment, cloud IoT remote monitoring |
| Main materials | Carbon steel, alloy steel |

The dry oil-free range is configured to the required duty point anywhere between 45 kW and 250 kW, at a working pressure from 7 to 10 bar. Units can be specified with constant-pressure frequency conversion of the main engine, a cloud IoT monitoring module, and on large frames with a split cooler. Horsepower equivalents from 60 to 335 hp are available for buyers who size systems in hp.
Main frame and enclosure are built in carbon steel and alloy steel. The airend carries a shell jacket and a jacket type liquid cooling shell; the rotor and shell interior are coated. A pipe muffler is fitted at each compression host outlet, sound insulation panels and cooling-air baffles line the canopy, and door panel joints are closed with a keel-sealing strip. The cooler is mounted vertically in a side-suction, top-discharge arrangement.
PET bottle blowing, air separation, automotive, brewing, electronics, food and beverage, packaging, petrochemical, semiconductor and textile industries, wherever the process air must stay free of oil.
Sollant supports OEM customization of sheet metal colour, appearance, voltage and frequency. The company has more than 22 years of industry experience, a 30,000 ㎡ facility, 150 employees and a 20-engineer R&D team, with an annual output of 20,000 units and exports to more than 100 countries. One-to-one pre-sale, in-sale and after-sale service is provided, with 24-hour after-sales support. An EC Declaration of Conformity for air compressors (certificate 0P230209.SSE0Q23) is held against EN ISO 12100:2010, EN 60204-1:2018 and EN 1012-1:2010, and the manufacturing site operates an ISO 14001 environmental management system.
It meets ISO 8573-1 Class 0 air standards, as stated for the SLTOF oil-free series.
The air side uses a wear-free sealing system with a stainless steel spring-loaded metal ring; the lubricating oil side uses a copper labyrinth seal, so the two chambers stay separated.
45-250 kW (60-335 hp), with 3.7-46 m³/min displacement at 7-10 bar working pressure.
Yes. The airend has a jacket type liquid cooling shell and the cooler is installed vertically with side suction and top discharge; large units use a split cooler.
The intelligent control system provides voltage, phase sequence and current detection, running-hour accumulation, overload, over-pressure and high-temperature alarms, maintenance reminders and password protection at different permission levels, supporting unattended 24-hour operation with cloud IoT remote monitoring.
Yes. OEM customization covers sheet metal colour, appearance, voltage and frequency.
Email: info@sollant.com
Tel / WhatsApp: +86 155-8905-3798
Address: No.215, Songri Center, Beihongqiao, Jiading District, Shanghai, China
Corporate brochure: download PDF
Send your required power, working pressure, air displacement and site voltage so a matching SLTOF dry oil-free configuration can be proposed.