Lightweight Polyester Infusion Core Mat 1.5mm 120g/m² for Marine and Wind
CX Core Material in 1.5mm thickness and 120g/㎡ dry weight is a polyester nonwoven designed to replace traditional Soric LRC variants. It is engineered for vacuum infusion and resin infusion processes, enabling laminate thickness build-up with minimal resin uptake. Ideal for marine hulls, wind turbine blades, and industrial panels, it provides a balanced combination of weight reduction and stiffness improvement.
Key Selling Points
- ✔ Slim Profile for Tight Curvature: At 1.5mm thickness, this core mat conforms easily to complex curves and tight radii, supporting intricate marine and aerospace molds. (source: thickness 1.5mm)
- ✔ Low Dry Weight Enhances Payload: 120g/㎡ density minimizes added weight, critical for lightweight structures in automotive and UAV applications. (source: dry weight 120g/㎡)
- ✔ High Temperature Processing: Max process temperature of 180℃ allows compatibility with various resin systems and rapid curing cycles. (source: max process temperature 180℃)
- ✔ Reduces Resin Consumption: The thin profile and engineered porosity limit resin absorption, lowering material costs while maintaining structural performance. (source: helps reduce resin consumption)
Technical Specifications
| Parameter | Value |
|---|
| Thickness | 1.5mm |
| Roll length | 70m |
| Width | 1.27m |
| Dry weight | 120g/㎡ |
| Max. Process Temperature | 180℃ |
| Material | Polyester |
Models and Options
This product is available in the following configuration:
- CX Core Material 1.5mm, 120g/㎡, roll length 70m
Materials and Structure
The core mat is made of high-quality polyester fibers, formed into a nonwoven structure. This design provides an excellent resin flow path during infusion, ensuring consistent laminate quality.
Applications
- Marine & Yacht
- Wind Power
- Automotive & Rail Transit
- Aerospace & UAV
- Construction & Sanitary Ware
- Anti-corrosion Industry
Customization
Custom cut sizes and labeling options are available upon request. Please contact our sales team for further details.
FAQ
What is the maximum process temperature?
180℃, allowing use with a wide range of resin systems.
What is the standard roll length?
Each roll is 70m long.
Is this material suitable for vacuum infusion?
Yes, it is specifically designed for vacuum infusion and resin infusion processes.
Can I get custom sizes?
We can provide custom cut sizes based on your requirements.
What is the typical application for this thickness?
It is ideal for curved surfaces and thin laminates in marine and automotive applications.
Inquiry Information
For more details or to place an order, please contact:
Email: waylon@cinoncomposites.com | Phone: +86 186-2098-8848
Image Filename and Alt Suggestions
Main Image: cx-core-mat-1.5mm-marine.png
Alt: CX Core Material 1.5mm polyester infusion mat for marine hull
Secondary Image: cx-core-mat-infusion-process.png
Alt: Vacuum infusion process with CX Core Mat
