{{ variable.name }}
This is the meat and carcass version of the insulated refrigerated body: a galvanised steel meat rail and hooks fitted at build stage, stainless steel 304 interior lining with coved corners for washing down, and an aluminium T-section floor rail that keeps air moving under the load. The body holds -18 C for carcass, poultry and seafood work, and can be ordered on 4x2 chassis for 3,000-6,000 kg payload or 6x4 for 15,000-25,000 kg.

| Item | Specification |
|---|---|
| Configuration | Insulated refrigerated body for meat, poultry and seafood, including hanging carcass loads |
| Cargo equipment | Galvanised steel meat rail and hooks, fitted at build stage |
| Interior lining | Food-grade FRP or stainless steel 304 with coved corners for washing down |
| Floor | 100-150 mm insulated floor; aluminium checker plate, stainless plate or aluminium T-section rail |
| Drainage | Stainless or PVC drain plugs, one to four depending on body length |
| Temperature range | +12 C to -18 C single temperature; -20 C to -25 C with low-temperature two-stage unit |
| Insulation | FRP/GRP skin 1.5-2.0 mm, polyurethane core 80-120 mm; K value about 0.3-0.4 W/m2K at 100 mm |
| Pull-down and stability | About 30-60 minutes from 30 C ambient to 0 C; within plus or minus 1 C of set point |
| Door seal | Multi-lip EPDM gasket, stainless hinges, locks and handles; heated seal optional |
| Chassis options | 4x2 for 3,000-6,000 kg payload, 6x4 for 15,000-25,000 kg; air brake with ABS |
| Body volume | 10-45 m3 line; internal length 3,800-9,600 mm |
| Working ambient | -20 C to 45 C with tropical cooling and cold-start packages |
The rail and lining package can be combined with body volumes from 10 to 45 m3 and either chassis family. Further factory options are shelving, cargo securing rails, partition wall, LED interior light, side door, side curtain and rear tail-lift, plus engine-driven, self-powered diesel, electric standby or eutectic plate refrigeration.
Body skin is FRP/GRP 1.5-2.0 mm with a food-grade gel coat inside, over polyurethane foam at 40-45 kg/m3, high-pressure foamed with seamless joints and no cold bridge at the frame. The rear door frame and posts are stainless steel. Frames are galvanised steel or aluminium profiles, the sub-frame is a Q235 channel bolted to the chassis rails with anti-vibration pads, and the chassis frame is Q235/Q345 steel 6-8 mm. Fasteners and trim are stainless or galvanised.
Meat, poultry and seafood transport including hanging carcass loads, slaughterhouse to processing plant and processing plant to wholesale market runs, butchery and food service supply, fishery and aquaculture cold transport, dairy and chilled beverages, fruit and vegetables, and frozen food distribution where the same body is used for packed loads.
Rail height, number of hooks and drain positions are set per order, together with the lining choice of stainless steel 304 or food-grade FRP. Left-hand or right-hand drive, Euro II to Euro V engines matched to local fuel, R404A or a low-GWP refrigerant on request, temperature recorder and remote monitoring, tropical cooling and cold-start packages are available. A spare-parts kit with filters, belts, door gaskets, thermostats, fan motors and fuses can ship with the truck.
A galvanised steel meat rail with hooks, installed at build stage together with the reinforced body structure it hangs from.
Yes. Interior lining is food-grade stainless steel 304 or FRP with coved corners, and one to four stainless or PVC drain plugs are fitted depending on body length.
The aluminium T-section rail floor lets air circulate under the load, which keeps temperature even from front to rear with the two or three fan evaporator.
+12 C to -18 C on a single-temperature body; -20 C to -25 C with a low-temperature two-stage unit, with a heated door seal available for deep-frozen work.
4x2 for 3,000-6,000 kg payload on city and regional work, 6x4 for 15,000-25,000 kg where the body is long and the route leaves the highway.
About 30-40 working days from down payment, 12-month warranty on major components with the refrigeration unit under supplier terms, and a pre-shipment check covering insulation and leak test, unit run and pull-down test, door seal check, brake test and road test.
Send the cargo type, hanging or packed loading, rail height needed and the temperature band, so the rail layout, lining and unit capacity are fixed together.
Henan Elorry Industrial Co., Ltd., Zhengzhou, Henan, China
Tel: +86-13083602803 WhatsApp: +86-16638078903
Email: info@elorry-ind.com Website: www.elorry-ind.com