Modified PA66 GF30 Glass Fiber Reinforced Nylon 66 Compound

Name: "Modified PA66 GF30 Glass Fiber Reinforced Nylon 66 Compound"
Rating: 5 (483 reviews)

SKU: 5568336709

الطراز: PA66-WHG30A

WanHan Plastic

دخول المتجر

تفاصيل البضائع

Product Specification

Type	30% Glass Fiber Reinforced PA66 Injection Molding Compound	Model	PA66-WHG30A
Params	Grade: PA66-WHG30A. Material: PA66 GF30 (30% glass-fiber-reinforced polyamide 66). Processing: injection molding. Color: natural, black or custom color subject to confirmation. Packaging: 25 kg bags; palletized shipment available. Typical values from the current WanHan grade page: tensile strength 175 MPa (ISO 527-2); tensile strain at break 9% (ISO 527-2); flexural strength 255 MPa (ISO 178); flexural modulus 7,000 MPa (ISO 178); notched impact strength 18 kJ/m² (ISO 179); heat deflection temperature, method B, 220°C (ISO 75-2/B); melt flow index 20 g/10 min (ISO 1133); density 1.38 g/cm³ (ISO 1183); molding shrinkage 0.5% (ISO 2577); UL 94 flammability: not specified. These are typical screening values, not guaranteed specification limits. Confirm the current production-grade TDS, conditioning state and molded-part performance before final approval.	Material	Polyamide 66 (PA66) reinforced with 30% glass fiber.
Applicable Industry	Automotive cooling fans, fan shrouds and radiator-system components; under-hood brackets, covers and fluid-handling housings; electrical connector bodies and structural supports; industrial gears, pump housings and machinery components; appliance frames and load-bearing molded parts. Final suitability depends on load, temperature, moisture, chemical contact, wall thickness, fiber orientation and project validation.	Technical data source and scope	Official data source: https://www.wanhan-plastic.com/pa66-gf30.html — WanHan grade PA66-WHG30A. Values shown are typical grade data for initial screening. Procurement acceptance and final part approval require the current confirmed TDS, agreed specification and project-specific molded-part testing.

Feature

30% glass-fiber reinforcement for higher stiffness, strength and dimensional control than unfilled PA66; injection-molding grade with documented typical data; natural, black and custom colors subject to confirmation; sample evaluation and technical support available. Moisture conditioning, fiber orientation, gate position, weld lines, shrinkage and warpage must be validated on the actual production tool. No UL 94 flammability rating is specified for this grade.

PA66 WHG30A (PA66 GF30) black glass-fiber reinforced Nylon 66 pellets supplied by WanHan Plastic for injection molding applications.

Close-up of WanHan PA66 WHG30A black PA66 GF30 pellets, a 30% glass-fiber reinforced Nylon 66 compound for engineering injection-molded parts.

Representative WanHan modified engineering plastic pellet samples in natural, black and custom colors. Color and formulation are available according to specific material grades and application requirements.

Representative WanHan PA-series engineering plastic pellets in black, red and brown colors. Image supplied from the WanHan product asset library; the exact PA66-WHG30A production color is subject to the approved grade and color specification.

Representative WanHan PA compound pellets in gray, natural and blue colors. Custom color availability is subject to grade selection, formulation confirmation and molded-part validation.

Representative WanHan PA compound pellets shown in black, red and brown. The image illustrates available pellet appearance and color options; final PA66-WHG30A color and formulation require order confirmation.