{{ variable.name }}
Chain-conveyor fed bagging press that turns alfalfa hay into 1100 × 1200 × 800 mm bales of 400-450 kg dry weight at 30-32 bales per hour.
The NKB280 is a straw and hay bagging machine built around a 1100 × 1200 × 800 mm bale chamber. Alfalfa hay enters through a 2600 × 1200 mm opening on a chain conveyor and leaves as dry bales of 400-450 kg, at a rated 30-32 bales per hour and a capability of 10-12 tonnes per hour.
Two 45 kW motors (120 HP combined) run on 200-480V, 50 Hz, three-phase power, and each bale is secured with plastic bags or woven bags. The machine is fabricated in carbon steel, weighs 32,000 kg and occupies 10800 × 4800 × 4580 mm on the floor. The same model is rated for wheat straw and peanut hay, so one unit can cover a mixed forage programme.
The 1100 × 1200 × 800 mm chamber delivers dense bales in the 400-450 kg dry range, so alfalfa moves as consolidated units instead of loose material.
Rated output of 30-32 bales per hour with 10-12 T/h capability keeps a single line in step with the hay season.
Two 45 kW motors deliver 120 HP combined on 200-480V, 50 Hz, three-phase supply, matching common industrial grids in export markets.
A chain conveyor carries material into the 2600 × 1200 mm feed opening for a steady load through the press cycle.
Bales can be strapped with plastic bags or woven bags, letting buyers match consumables to local supply.
Verification of Conformity No. DPWD/09/060/2024 cites EN ISO 12100:2010, EN 60204-1:2018 and EN 415-1:2014, valid to 18 Sep 2029.
| Model | NKB280 |
|---|---|
| Machine type | Straw / hay bagging machine |
| Bale size (W × L × H) | 1100 × 1200 × 800 mm |
| Feed opening (L × H) | 2600 × 1200 mm |
| Packing materials | Alfalfa, wheat straw, peanut hay |
| Output capacity | 30-32 bales/hour |
| Bale weight | Dry 400-450 kg |
| Capability | 10-12 T/hour |
| Voltage | 200-480V / 50 Hz / 3 phase |
| Strapping | Plastic bags / woven bags |
| Power | 45 kW × 2 / 120 HP |
| Machine size (L × W × H) | 10800 × 4800 × 4580 mm |
| Feeding way | Chain conveyor |
| Weight | 32000 kg |
| Main material | Carbon steel |



The documented configuration is the NKB280. Choices agreed at order stage are the packing material to be run (alfalfa, wheat straw or peanut hay), the strapping consumable (plastic bags or woven bags) and the supply voltage inside the 200-480V / 50 Hz / three-phase window. Bale size and the 10800 × 4800 × 4580 mm footprint are fixed by the model.
Frame, chamber and pressing assembly are built in carbon steel, with the complete unit weighing 32,000 kg — mass that keeps the press steady through repeated high-density cycles. Material is drawn in through the 2600 × 1200 mm feed opening on a chain conveyor, and bales exit the 1100 × 1200 × 800 mm chamber strapped in plastic bags or woven bags.
Baling parameters are set against the material and the site. In the Romania project, day-night temperature swings and fluctuating alfalfa moisture were handled by tailoring baling parameters and custom programs during commissioning. Voltage selection within 200-480V, consumable choice and material trials are agreed before shipment; buyers are asked for material type, moisture level, target bale weight and available floor space.
Scope: 1 set of fully automatic alfalfa hydraulic baler for high-density baling of harvested alfalfa, silage feed processing, transport and storage.
Result: after installation and commissioning, bale density rose above 400 kg/m³ and transport costs dropped by about 30%; automated operation doubled baling efficiency and covered the local hay season. Operators and maintenance staff were trained on site, and the customer expressed a long-term repurchase intention.
Highlight: parameters and programs were tuned on site for large day-night temperature differences and fluctuating alfalfa moisture, resolving the frequent jamming the customer had experienced before. Expected service life under normal maintenance: 8-10 years.
Bales measure 1100 × 1200 × 800 mm and weigh 400-450 kg in dry condition.
Alfalfa, wheat straw and peanut hay are the rated packing materials.
30-32 bales per hour, which corresponds to a 10-12 T/hour capability.
200-480V, 50 Hz, three-phase, driving two 45 kW motors (120 HP combined).
With plastic bags or woven bags, selected at order stage.
Yes. Parameters and programs are tuned to material moisture and local temperature, as done on site in Romania.
Verification of Conformity No. DPWD/09/060/2024 (EN ISO 12100:2010, EN 60204-1:2018, EN 415-1:2014, valid to 18 Sep 2029) and Attestation Certificate of Machinery Directive No. EASY03220201M (EN ISO 12100:2010, EN 60204-1:2018, valid to 21 Mar 2027).
These are quoted per project. Send material type, moisture, target bale weight and available space for a confirmed offer.
Send your material, moisture level, target bale weight and floor space for model and solution confirmation.
Sales@nkbaler.comWhatsApp / Tel: +86 15021631102 · Qun Sheng Lu, Hui Shan Qu, WuXi Shi, Jiang Su Sheng, China · www.nkbaler.com