{{ variable.name }}
Horizontal Hydraulic Baler / Model NKW160Q
A 160T auto-tie horizontal baler for recycling plants and industrial waste lines, rated 12-15 tonnes per hour and fed through a 2000 x 1100 mm opening.
The NKW160Q is a fully automatic horizontal hydraulic baler built for continuous duty in recycling yards, waste paper plants and mixed solid-waste facilities. A 160T main cylinder and a 45KW + 11KW motor set press loose material into bales of 1100 mm (W) x 1250 mm (H) x up to about 1600 mm (L), at a material density of 400-600 kg/m3 and a rated capacity of 12-15 tonnes per hour.
Material enters through a 2000 x 1100 mm feed opening from a 2000 x 14000 mm conveyor driven by a 7.5KW motor. The automatic tie unit performs wire tying inside the cycle, and the carbon steel mainframe with a 25MPa hydraulic system weighs 28 tons on a footprint of about 11 x 2.3 x 2.9 m.




160T of compaction force reaches the 400-600 kg/m3 density range, so bales keep their shape for stacking, storage and truck loading.
The rated capacity for this bale format is aimed at mid to large recycling lines rather than small workshops.
The two-motor set drives the compression cycle and is intended for a stable three-phase supply in an indoor workshop.
A 14 m conveyor with its own 7.5KW motor carries material to the 2000 x 1100 mm feed opening, so loose waste is spread before pressing.
Automatic wire tying keeps manual handling out of the baling cycle; the 28-ton carbon steel mainframe measures about 11 x 2.3 x 2.9 m.
| Model | NKW160Q |
|---|---|
| Type | Fully automatic horizontal hydraulic baler, auto tie |
| Bale size | 1100 mm (W) x 1250 mm (H) x ~1600 mm (L) |
| Material density | 400-600 kg/m3 |
| Feed opening size | 2000 x 1100 mm |
| Main motor power | 45KW + 11KW |
| Capacity | 12-15 ton/hour |
| Main cylinder force | 160T |
| Hydraulic pressure | 25MPa |
| Mainframe material | Carbon steel |
| Mainframe weight | 28 tons |
| Mainframe size | About 11 x 2.3 x 2.9 m (L x W x H) |
| Conveyor size | 2000 x 14000 mm |
| Conveyor motor | 7.5KW |
| Conveyor weight | About 5 tons |
| Working conditions | Indoor recycling workshop, -10 to 45 C, normal humidity, stable three-phase supply |
Two automation levels are offered on this horizontal hydraulic baler platform: the fully automatic auto-tie model NKW160Q described on this page, and a semi-automatic configuration for plants that prefer operator-controlled tying.
Matched equipment for complete lines includes conveyors, hydraulic components, baling wire, PET strapping, jumbo bags, packing tools, shredders and crushers.
The mainframe and compression chamber are fabricated in carbon steel, with the hydraulic circuit operating at 25MPa and a main cylinder rated at 160T. The infeed is a separate 2000 x 14000 mm conveyor frame of about 5 tons with its own 7.5KW motor. Total mainframe weight is 28 tons on a footprint of roughly 11 x 2.3 x 2.9 m, which suits an indoor recycling workshop.
The NKW160Q compresses loose waste into bales that are easier to store, handle and transport, cutting space requirements and waste transport frequency.
Customized baling equipment and complete-line projects are part of the scope we quote. To confirm a model and solution, send material type, material dimensions, loose density, target bale weight or size, available floor space, power conditions, required automation level and throughput. Layout is checked against the 11 x 2.3 x 2.9 m mainframe and the 2000 x 14000 mm conveyor.
Documentation on file: Verification of Conformity No. DPWD/09/060/2024 referencing EN ISO 12100:2010, EN 60204-1:2018 and EN 415-1:2014 (valid 2024-09-19 to 2029-09-18), and a Machinery Directive attestation EASY03220201M issued by UDEM (valid 2022-03-22 to 2027-03-21).
A recycling station equipment manufacturer in Indonesia runs one unit for waste plastic baling and waste paper baling. The reported outcome is stable operation, with low noise and low energy consumption listed as the project highlights; the installation is recorded with a 10-15 year duration.
The rated capacity is 12-15 tonnes per hour at the stated bale format. Real output depends on material type, loose density and how evenly the conveyor is loaded.
Bales are 1100 mm wide, 1250 mm high and up to about 1600 mm long, at 400-600 kg/m3 material density. Final bale weight depends on the material being pressed.
Plan for a mainframe of roughly 11 x 2.3 x 2.9 m plus the 2000 x 14000 mm infeed conveyor. Share your hall layout and the arrangement can be confirmed.
The NKW160Q is the fully automatic auto-tie version. A semi-automatic configuration is also offered where the operator controls bale tying.
45KW + 11KW for the main motors and 7.5KW for the conveyor, on a stable three-phase supply, in an indoor workshop at -10 to 45 C with normal humidity.
A Verification of Conformity (No. DPWD/09/060/2024) referencing EN ISO 12100:2010, EN 60204-1:2018 and EN 415-1:2014 is on file, together with Machinery Directive attestation EASY03220201M.
Material type, dimensions, loose density, target bale size or weight, required throughput, floor space, power supply and the automation level you need.
Shaanxi Nick Machinery Equipment Co., Ltd. has manufactured baling equipment since 2013 in a 5000 m2 factory with 50 employees, an annual output of 600 units, a 15-person R&D team and 90% of output exported to North America, South America and Asia.
Contact: Nick | Sales@nkbaler.com | Tel / WhatsApp +86 15021631102 | Qun Sheng Lu, Hui Shan Qu, WuXi Shi, Jiang Su Sheng, China
Send Material Details