{{ variable.name }}

Rice husk is light, dusty and awkward to move in bulk, which is why the NKB220 is also run as a rice husk bale press, compactor and bagging press. The machine compresses husk into 480 × 480 mm bags with a height of 220-350 mm and a finished weight of 30-35 kg, at 90 bales per hour and 2.5-3 t/h. A 200 t pressing force on a 21 MPa hydraulic circuit closes each bag in 22 seconds, and the specification requires material at 13% moisture or below. The carbon steel frame measures 4260 × 1100 × 1800 mm and weighs 6 t; a 40 HP motor runs on 200-480 V, 50 Hz, three-phase supply.
Loose husk becomes a defined bag weight and shape, so storage volume drops and husk can be counted, stacked and loaded by bag instead of by heap.
At 90 bales per hour the press keeps up with a continuous husk stream from processing rather than letting it accumulate in the yard.
Pressure at 21 MPa is applied quickly and repeatedly, so bag density stays even across a shift instead of drifting bag to bag.
Keeping incoming husk at or below 13% moisture protects bag shape and cycle time, which is the usual failure point on light, dusty material.
Husk can be fed by conveyor or directly from the collection point without an extra size-reduction step ahead of the press.
The same model suits rice-processing sites with different power supplies, so a group can standardise on one bagging machine.
| Parameter | Value |
|---|---|
| Model | NKB220 |
| Application | Rice husk bale press / compactor / bagging press |
| Pressing force | 200 t |
| Working pressure | 21 MPa |
| Bale size (L × W × H) | 480 × 480 × (220-350) mm |
| Bale weight | 30-35 kg per bag |
| Compress time | 22 s |
| Bale capacity | 90 bales/h |
| Throughput | 2.5-3 t/h |
| Feed opening (L × H) | 700 × 480 mm |
| Moisture requirement | 13% or under |
| Motor power | 40 HP |
| Voltage | 200-480 V / 50 Hz / 3 phase |
| Machine size (L × W × H) | 4260 × 1100 × 1800 mm |
| Machine weight | 6 t |
| Frame material | Carbon steel |
One model, set up for husk. Bale height is adjustable across 220-350 mm, the electrical arrangement is fixed within the 200-480 V range, and husk lines are normally matched with conveyors, baling wire, woven bags or jumbo bags and packing tools.
The carbon steel frame carries the 200 t press and 6 t of machine mass, so light and dusty husk is pressed under a stable structure rather than a moving one. Husk enters through the 700 × 480 mm opening, is compressed in the 480 × 480 mm chamber at 21 MPa, and leaves as a 220-350 mm high bag in 22 seconds.
Husk density and moisture vary between regions, so bale height and cycle settings are confirmed from the material brief: material type, dimensions, loose density, target bale weight or size, available space, power conditions, automation level and required throughput.
Yes. The machine is documented as a rice husk bale press, rice husk compactor and rice husk bagging press.
2.5-3 t/h, which corresponds to 90 bales per hour with a 22-second compress cycle.
30-35 kg per bag, with a 480 × 480 mm section and an adjustable height of 220-350 mm.
13% moisture or below. Husk above that level can lose bag shape and slow the cycle.
A 40 HP motor on 200-480 V, 50 Hz, three-phase power, with the configuration matched to your site inside that range.
4260 × 1100 × 1800 mm at a machine weight of 6 t, so floor loading should be checked before installation.
Send your husk moisture range and required hourly tonnage to Sales@nkbaler.com or WhatsApp +86 15021631102.
Address: Qun Sheng Lu, Hui Shan Qu, WuXi Shi, Jiang Su Sheng, China. Website: www.nkbaler.com
