{{ variable.name }}
A single screw loss-in-weight feeder for continuous gravimetric metering of granules, glass fibers, crushed materials, granule-powder mixtures and free-flowing powders.
The TG-LW-SS80 series is a single screw loss-in-weight feeder built for continuous gravimetric feeding of solid materials. In this configuration the metering bin is 60 L as standard, with a 120 L bin available; material flows through a 15 L U-shaped hopper into the single screw and is discharged at a controlled rate.
Every part in contact with the material is SS304, and the screw is driven by a 1 kW, 380 V servo motor. Ambient temperature is 0-40 °C and material temperature 0-50 °C. Three model configurations are available - TG-LW-SS80U, TG-LW-SS80P and TG-LW-SS80LP - all listed in the CE verification of conformity ICR/VC/HFG260828.
Metering bin, hopper and material-contact parts are SS304, which simplifies cleaning when a line switches between recipes and suits chemical and food ingredients.
The 60 L metering bin is the standard size for this single feeder and a 120 L bin is available, so refill frequency can be matched to the shift pattern of the line.
The single screw is driven by a 1 kW, 380 V servo motor, the standard drive specified for this feeder model.
Suited to continuous loss-in-weight duties on extrusion, compounding and continuous conveying lines where a stable feed rate over the whole run is the priority.
The standard build covers plant ambient temperatures of 0-40 °C and material temperatures up to 50 °C.
CE verification of conformity ICR/VC/HFG260828 valid to 19 August 2031; factory certified to ISO 9001:2015 and ISO 14001:2015.
| Model configurations | TG-LW-SS80U / TG-LW-SS80P / TG-LW-SS80LP |
|---|---|
| Feeder type | Single screw loss-in-weight feeder |
| Metering bin | 60 L / 120 L |
| U-shaped hopper | 15 L |
| Material in contact with product | SS304 |
| Servo motor | 1 kW, 380 V |
| Soft connection | Cloth cover / silicone rubber |
| Ambient temperature | 0-40 °C |
| Material temperature | 0-50 °C |
| Paint color | RAL 5003 |
| Operating conditions | Continuous loss-in-weight metering; intermittent loss-in-weight batch metering |
| Electrical explosion-proof | Optional |
| CE certification | ICR/VC/HFG260828 - EN ISO 12100:2010, EN 60204-1:2018+A1:2025, EN IEC 61000-6-2:2019, EN IEC 61000-6-4:2019, valid to 2031-08-19 |
| Factory system certificates | ISO 9001:2015 (38524UQN0DP2R0S); ISO 14001:2015 (38524UE640TRR0S) |
These are the standard parameters for this single feeder. For other configurations, review the wider loss-in-weight feeder range or contact the manufacturer with custom requirements.
All parts in contact with the material are SS304. The metering bin sits above a 15 L U-shaped hopper that feeds the single screw, and bin and body are joined by a soft connection supplied either as a cloth cover or in silicone rubber. The frame is painted RAL 5003. Screws, barrels, sheet-metal parts, controllers and HMIs are designed and produced in house by the manufacturer, with proprietary control software.
The feeder meters solid materials such as granules, glass fibers, crushed materials, granule-powder mixtures and powders with good flowability. Typical continuous duties are feeding in extrusion, ratio control and continuous conveying in chemical, building-material and related processes.
A reference project serving plastics compounding companies, food producers, chemical companies and users of other continuous production lines reported automated batching, more stable formula control and improved production efficiency. The project has been in operation for one year and covers continuous feeding in extrusion, ratio control and continuous conveying.
Granules, glass fibers, crushed materials, granule-powder mixtures and powders with good flowability. If your material is cohesive or irregular, tell us and we will advise on the feeder structure.
Yes. The feeder is applied to two production conditions: continuous loss-in-weight metering and intermittent loss-in-weight batch metering. This page describes the continuous configuration.
TG-LW-SS80U, TG-LW-SS80P and TG-LW-SS80LP are all listed in CE verification of conformity ICR/VC/HFG260828, valid to 19 August 2031 and assessed against EN ISO 12100:2010, EN 60204-1:2018+A1:2025 and the EMC standards EN IEC 61000-6-2:2019 and EN IEC 61000-6-4:2019.
A 1 kW, 380 V servo motor drives the single screw.
Through a soft connection available as a cloth cover or in silicone rubber, with a 15 L U-shaped hopper feeding the screw.
Yes, an optional electrical explosion-proof function is available. Other special requirements are handled through customized design.
Yes, a cloud management platform is available for remote monitoring of feeding rate, weight data, equipment status and alarm information.
Transcell Intelligent Machinery (Changzhou) Co., Ltd.
Address: Building 9, No.9 Caoxi Road, Niutang Town, Wujin District, Changzhou City, Jiangsu Province, China
Email: info@transcellgroup.com | Tel: +86 400-068-3777 | WhatsApp: +852 6952 8737
Website: www.transcellgroup.com
Send your material type, required feed rate and available bin height so the metering bin size and hopper configuration can be confirmed for your line.
SEO Title: SS304 Continuous Loss-in-Weight Feeder for Extrusion Metering
Meta Description: SS304 single screw loss-in-weight feeder for continuous metering of granules, glass fibers and free-flowing powders. 60L or 120L bin, 1 kW servo, CE certified.
URL Slug: continuous-loss-in-weight-feeder
Image file and alt suggestions:
loss-in-weight-feeder-tg-lw-ss80-continuous-front.png - TG-LW-SS80 continuous loss-in-weight feeder shown from the front with SS304 metering bin
loss-in-weight-feeder-tg-lw-ss80-u-hopper-screw.png - 15 L U-shaped hopper feeding the single screw of the feeder
loss-in-weight-feeder-tg-lw-ss80-servo-drive.png - 1 kW 380 V servo motor driving the single screw