{{ variable.name }}
Horizontal Hydraulic Baler / Manual Tie Configuration
The manually tied version of the horizontal hydraulic baler platform, with a 2000 x 1100 mm feed opening and a 7.5KW infeed conveyor.
This semi-automatic horizontal hydraulic baler is the operator-tied configuration of the horizontal baler platform. Instead of an automatic tie unit, the operator sets the wire count and position on each bale, which keeps the tying step under direct control on mixed or changing material streams.
The compression side follows the platform data: 160T main cylinder force, 400-600 kg/m3 material density, bales of 1100 mm (W) x 1250 mm (H) x up to about 1600 mm (L), a 2000 x 1100 mm feed opening and 12-15 tonnes per hour capacity. The mainframe is carbon steel with a 25MPa hydraulic circuit, a 45KW + 11KW main motor set and a separate 2000 x 14000 mm conveyor driven by a 7.5KW motor.




Bales are tied by the operator rather than by an automatic tie unit, so the wire count and position are decided at the bale.
A 160T main cylinder reaches 400-600 kg/m3 density in bales up to about 1600 mm long and 1250 mm high.
The wide feed opening takes material from the 2000 x 14000 mm conveyor, whose own motor is rated 7.5KW.
A two-motor set drives the 25MPa hydraulic circuit inside a carbon steel mainframe weighing 28 tons.
Rated throughput suits recycling facilities and industrial waste rooms that do not need automatic tying.
| Model | NKW160Q platform, semi-automatic configuration |
|---|---|
| Type | Semi-automatic horizontal hydraulic baler, manual tying |
| Bale size | 1100 mm (W) x 1250 mm (H) x ~1600 mm (L) |
| Material density | 400-600 kg/m3 |
| Feed opening size | 2000 x 1100 mm |
| Main motor power | 45KW + 11KW |
| Capacity | 12-15 ton/hour |
| Main cylinder force | 160T |
| Hydraulic pressure | 25MPa |
| Mainframe material | Carbon steel |
| Mainframe weight | 28 tons |
| Mainframe size | About 11 x 2.3 x 2.9 m (L x W x H) |
| Conveyor size | 2000 x 14000 mm |
| Conveyor motor | 7.5KW |
| Conveyor weight | About 5 tons |
| Working conditions | Indoor recycling workshop, -10 to 45 C, normal humidity, stable three-phase supply |
Two automation levels are offered: this semi-automatic configuration with manual tying, and the fully automatic auto-tie model NKW160Q. Both are horizontal hydraulic balers with the same compression chamber and feed opening size.
Matched equipment for a complete line includes conveyors, hydraulic components, baling wire, PET strapping, jumbo bags, packing tools, shredders and crushers.
The mainframe and compression chamber are fabricated in carbon steel and rated for a 25MPa hydraulic circuit with a 160T main cylinder. The separate 2000 x 14000 mm conveyor frame weighs about 5 tons and runs on its own 7.5KW motor, feeding the 2000 x 1100 mm opening. The 28-ton mainframe occupies roughly 11 x 2.3 x 2.9 m, so the baler plus conveyor fits into an indoor recycling workshop.
The baler compresses loose waste into bales that are easier to store, handle and transport, reducing space requirements and waste transport frequency.
Customized baling equipment and complete-line projects are part of the scope we quote. Please provide material type, dimensions, loose density, target bale weight or size, available space, power conditions, automation level and required throughput so the model and solution can be confirmed.
Documentation on file: Verification of Conformity No. DPWD/09/060/2024 referencing EN ISO 12100:2010, EN 60204-1:2018 and EN 415-1:2014 (valid 2024-09-19 to 2029-09-18), and a Machinery Directive attestation EASY03220201M issued by UDEM (valid 2022-03-22 to 2027-03-21).
Typical projects are recycling-facility upgrades, new recycling plants, small processing workshops, warehouse and industrial waste management, and customized baling equipment or complete-line projects.
The machine is intended for an indoor recycling workshop at -10 to 45 C, normal humidity and light dust, with a stable three-phase power supply. One unit installed for waste plastic and waste paper baling is recorded as operating stably, with low noise and low energy consumption noted as highlights.
The compression chamber, bale format and feed opening come from the same horizontal baler platform; the semi-automatic version has the operator tie each bale instead of using an automatic tie unit.
Bales of 1100 mm wide, 1250 mm high and up to about 1600 mm long at 400-600 kg/m3 material density. Final bale weight depends on the material pressed.
The platform is rated 12-15 tonnes per hour at the stated bale format. Actual output depends on material type, loose density and loading consistency.
Mainframe of roughly 11 x 2.3 x 2.9 m plus a 2000 x 14000 mm conveyor, 45KW + 11KW main motors and 7.5KW conveyor motor on a stable three-phase supply.
Yes. A Verification of Conformity (No. DPWD/09/060/2024) against EN ISO 12100:2010, EN 60204-1:2018 and EN 415-1:2014 is on file, plus Machinery Directive attestation EASY03220201M.
Material type, dimensions, loose density, target bale size or weight, throughput, floor space, power supply and the automation level you require.
Shaanxi Nick Machinery Equipment Co., Ltd. has produced baling equipment since 2013 in a 5000 m2 factory with 50 employees, an annual output of 600 units, a 15-person R&D team and 90% of output exported to North America, South America and Asia.
Contact: Nick | Sales@nkbaler.com | Tel / WhatsApp +86 15021631102 | Qun Sheng Lu, Hui Shan Qu, WuXi Shi, Jiang Su Sheng, China
Request a Configuration