Fine Wire Drawing Machine
Compact 1500MPM 14D Fine Wire Drawing Machine for Bare Copper Wire
Model 14D · Inlet Φ1.6–0.8 mm · Outlet Φ0.25–0.6 mm · 14 dies · CE certified
1500 MPM Max Drawing Speed
20HP + 5HP Inverter Drive
Tungsten Carbide Capstans
1950 × 1100 × 1750 mm
Page Metadata
SEO Title: Compact 1500MPM 14D Fine Wire Drawing Machine for Bare Copper Wire
Meta Description: 14D fine wire drawing machine draws bare copper from 1.6-0.8mm to 0.25-0.6mm at up to 1500MPM, with 14 dies, dual 15KW/4KW motors and CE certification.
URL Slug: /14d-fine-wire-drawing-machine-bare-copper
H1: Compact 1500MPM 14D Fine Wire Drawing Machine for Bare Copper Wire
Product Summary
The 14D is a fine wire drawing machine engineered for continuous drawing of bare copper wire. It accepts inlet wire from Φ1.6 mm down to Φ0.8 mm and produces finished wire from Φ0.25 mm to Φ0.6 mm at a maximum drawing speed of 1500 MPM. Fourteen dies run in a two-spool horizontal arrangement using horizontally sliding continuous drawing with spray lubrication, so a single operator can move from coarse inlet to finished fine wire in one continuous pass.
Drive and spooling are handled by two AC frequency-converter motors — a 20HP (15KW) main drive motor and a 5HP (4KW) spooling motor — that keep drawing speed and take-up tension stable across the run. Spooling tension is balanced by a swing arm that automatically revises tension as the spool fills, which keeps the finished wire package tight and even.
The unit measures 1950 × 1100 × 1750 mm with a net weight of 2200 KG, giving a compact footprint that uses limited production floor space while remaining easy to operate for new operators. It is supplied by Jiangsu Listrong Mechanical & Electrical Co., Ltd., established in 2009, operating a 15,000 m² facility with 70 employees, a 15-engineer R&D team and an annual output of 550 sets, with around 40% of production exported to the Middle East, India and Southeast Asia.
Key Features
1500 MPM drawing speed with 14 dies
Die reduction is set at 15% from No.1 to No.13 and 8% at No.14, so the machine converts Φ1.6–0.8 mm inlet copper into Φ0.25–0.6 mm finished wire at up to 1500 MPM — higher throughput per shift without adding a second pass.
Dual inverter-controlled motors
A 20HP (15KW) drive motor and a 5HP (4KW) spooling motor, both under AC frequency converter control, let the buyer tune drawing and take-up speed separately for stable wire diameter and fewer breakages.
Tungsten carbide capstans
Two 12-tier Φ316 mm capstans plus a final Φ268 mm capstan in tungsten carbide resist wear in continuous operation and help hold a consistent wire surface finish.
Compact, low space burden
At 1950 × 1100 × 1750 mm and 2200 KG, the machine occupies a small floor area, so it fits into existing wire-drawing lines without a major layout rebuild.
Simple operation for new operators
Spooling is balanced by a swing arm that automatically revises tension, and bobbins are fixed by a single screw with a loading and unloading cart — a low technical barrier that shortens training time on the shop floor.
Full protection and accessible inspection
A grille covers the transmission area and a stainless steel plate shields the drawing area, while a sealed cover with three inspection windows over the spooling area allows checks without opening the machine.
Technical Specifications
| Parameter |
Specification |
| Model | 14D |
| Type | Fine wire drawing machine |
| Usage | Bare copper wire drawing |
| Inlet diameter | Φ1.6 mm – Φ0.8 mm |
| Outlet diameter | Φ0.25 mm – Φ0.6 mm |
| Maximum drawing speed | 1500 MPM / MAX |
| Dies | 14 dies (customer self-provided), Φ25 mm × 8–12 mmT; No.1 independent, No.2–13 cast iron; pedestal adjustable according to capstan |
| Mechanical surface reduction rate | No.1 to No.13: 15%; No.14: 8% |
| Drawing method | 2 spools horizontal arrangement; horizontally sliding continuous drawing; spray lubrication type |
| Drive motor | 20HP (15KW) AC frequency converter control |
| Spooling motor | 5HP (4KW) AC frequency converter control |
| Capstan | Tungsten carbide; two 12-tier capstans Φ316 mm; last capstan Φ268 mm |
| Transmission | All transmission by timing belt |
| Lubrication system | Spray type (without water pump & tank); independent lubrication pipe for No.1 & No.24 die |
| Spool dimension | 300 mm / Max. or according to customer requirements — outer dia. Φ300, inner dia. Φ215, outer width 290, inner width 270, bore dia. Φ127 |
| Spool receiving capacity | 25–50 KG |
| Spooling control | Weight balance by swing arm; automatically revises spooling tension |
| Bobbin loading & unloading | Single bobbin fixed with screw, with loading and unloading cart |
| Brake | 10KG magnetic brake |
| Protection cover | Grille for transmission area; stainless steel plate for drawing area; sealed cover with 3 inspection windows for spooling area |
| Electric parts | Control parts made in China and Taiwan or overseas, top-class brand; relay OMRON; switch LG |
| Power source | Three-phase 415V 50HZ |
| Traversing unit | 110W synchronizing motor traversing; slide-rail bearing; traversing width 270 mm / Max. |
| Dimension | 1950 L × 1100 W × 1750 H (mm) |
| Net weight | 2200 KG |
| Certification | CE — Verification of Conformity, cert no. CE-JL26020401-AL-MD, issued by ICG (EU market), standard EN ISO 12100:2010 and EN 60204-1:2018/A1:2025, valid 2026-02-10 to 2031-02-09; 14D is listed in the certified scope |
Models and Options
14D standard configuration
14 dies, two-spool horizontal arrangement, 20HP drive motor and 5HP spooling motor, three-phase 415V 50HZ power supply, 1500 MPM maximum drawing speed.
Spool size option
Standard spool up to 300 mm, or built according to customer requirements. Reference spool: Φ300 outer dia., Φ215 inner dia., 290 mm outer width, 270 mm inner width, Φ127 bore; receiving capacity 25–50 KG. Maximum traversing width is 270 mm.
Die supply
Dies are customer self-provided — 14 pieces at Φ25 mm × 8–12 mmT. No.1 die is independent and No.2–13 are cast iron, with the die pedestal adjustable according to the capstan.
Bobbin handling option
Single bobbin fixed with screw, supplied together with a loading and unloading cart to reduce manual handling at the take-up end.
Materials and Structure
The frame is welded from Q235 steel plate, giving a rigid base for continuous drawing without vibration-driven diameter drift. Power runs through timing belt transmission to the capstans. The capstan set is tungsten carbide: two 12-tier Φ316 mm capstans followed by a final Φ268 mm capstan.
Lubrication is a spray type system without a water pump and tank, and an independent lubrication pipe serves the No.1 and No.24 die. A 10KG magnetic brake controls deceleration. Electrical control components are sourced from China, Taiwan or overseas top-class brands, with OMRON relays and LG switches used in the control circuit.
Operator protection is split by zone: a grille covers the transmission area, a stainless steel plate covers the drawing area, and a sealed cover with three inspection windows protects the spooling area so the take-up can be checked during the run.
Applications
The 14D is suited to industries that require processing of fine wire:
Wire and cable
Hardware products
Electronic components
Building materials
Because the outlet range starts at Φ0.25 mm, the machine is typically placed at the fine drawing stage of a bare copper line, feeding downstream bunching, annealing or insulation processes.
Customization
- Spool dimensions can be produced according to customer requirements, with 300 mm as the standard maximum.
- Dies are customer self-provided in the size Φ25 mm × 8–12 mmT, allowing buyers to match die quality and profile to their own wire specification.
- The die pedestal can be adjusted according to the capstan, supporting setup changes on site.
- Bobbin loading and unloading is delivered with a dedicated cart for the single-screw fixed bobbin.
- Spooling tension is set through wing-arm weight balance and is automatically revised during the run.
FAQ
What wire sizes can the 14D draw?
Inlet wire ranges from Φ1.6 mm to Φ0.8 mm and finished outlet wire from Φ0.25 mm to Φ0.6 mm, drawn through 14 dies in a single continuous pass.
What is the maximum drawing speed and reduction?
Maximum drawing speed is 1500 MPM. Mechanical surface reduction rate is 15% for dies No.1 to No.13 and 8% for No.14.
Are drawing dies included with the machine?
Dies are customer self-provided: 14 pieces at Φ25 mm × 8–12 mmT. No.1 is independent and No.2–13 are cast iron, and the pedestal can be adjusted according to the capstan.
What spool sizes and weights does it accept?
The machine accepts spools up to 300 mm or built to customer requirements. The reference spool is Φ300 outer diameter, Φ215 inner diameter, 290 mm outer width, 270 mm inner width and Φ127 bore, with a receiving capacity of 25–50 KG.
What power supply and motors are required?
The machine runs on a three-phase 415V 50HZ supply. The drive motor is 20HP (15KW) and the spooling motor is 5HP (4KW); both use AC frequency converter control.
How is lubrication handled?
Lubrication is a spray type system without a water pump and tank, with an independent lubrication pipe for the No.1 and No.24 die.
Is the 14D CE certified for the EU market?
Yes. A Verification of Conformity (CE) covering model 14D was issued by ICG under certificate number CE-JL26020401-AL-MD, referencing EN ISO 12100:2010 and EN 60204-1:2018/A1:2025, valid from 2026-02-10 to 2031-02-09.
What are the machine dimensions and net weight for shipping planning?
The unit measures 1950 L × 1100 W × 1750 H mm with a net weight of 2200 KG.
Inquiry Information
Send your wire inlet and outlet specification, required spool size and destination port so the 14D configuration can be confirmed before quotation.
Eric Jin
Email: sale02@xlq-machinery.cn
Tel / WhatsApp: +86 15261941206
Hassan Ma
Email: mxl@xlq-machinery.cn
Tel / WhatsApp: +86 17312979900
Address: No.99, North Zaofeng Road, Dongtai City, Jiangsu Province, China · Website: www.wire-cable-machine.com
Image Filename and Alt Suggestions
- wire-drawing-machine-14d-front-dual-spool.jpg — Alt: "14D fine wire drawing machine with dual horizontal spool arrangement"
- wire-drawing-machine-14d-control-side.jpg — Alt: "Model 14D bare copper wire drawing machine side view with sealed spooling cover"
- wire-drawing-machine-14d-capstan-detail.jpg — Alt: "Tungsten carbide capstan detail on the 14D wire drawing machine" (to be added from the same product set)
